Used Isotech Ips 303Dd for sale (1,986)

Condition: used, Primus Engineering Type: DST 350 This test setup was designed for performing IP protection tests for “dust” according to, for example, DIN 40050 Part 9 and DIN EN 60529. The test setup is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Pre-programmed test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing IP protection tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Kjdpozgbtiefx Acpjdu We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Kdjdpfxoz Hlx Hs Acpsu Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: CA2451010, overall weight: 33 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, controller manufacturer: Techman Robot, controller model: Control box AC TM12X (100-240 VAC), teach pendant manufacturer: Techman Robot, teach pendant model: TM Screen modèle TP01, input voltage: 230 V, type of input current: DC, warranty duration: 4 months, Equipment: documentation/manual, TECHMAN ROBOT collaborative robot, model TM12S-MX (S series) – NEW, in original sealed packaging, never used. Under warranty until [Date]. Lot contents: Kdjdpez Hz Hasfx Acpou - One TM12S-MX robotic arm, manufacturer reference 9TMABM130-01-004-A000-140300000, serial number CA2451010 - One TM12S-MX control cabinet, manufacturer reference 9TMABM130-01-004-A000-140300000, serial number CC2451010 - One TM Screen control panel, model TP01, manufacturer reference 9TM0B0000-04-019-A00Z0, serial number TP2435019 - One additional power supply MX version: control cabinet powered by direct current (24–60 VDC) – suitable for mobile robots (AMR) and embedded applications; without integrated AI camera on the wrist (option to add external cameras: up to 2 GigE 2D cameras, or 1 GigE 2D camera + 1 3D camera). Technical specifications (manufacturer's datasheet, S series): - Payload: 12 kg - Reach: 1300 mm - Arm weight: 33 kg - 6 rotary axes – J1, J2, J4, J5, J6: ±360°; J3: ±162° - Joint speeds: J1, J2: 130°/s; J3: 210°/s; J4, J5: 225°/s; J6: 450°/s - Max. speed: 4.5 m/s - Repeatability: ±0.03 mm - DC control cabinet: 8.9 kg - Cabinet I/O: 16 digital inputs / 16 digital outputs, 2 analog inputs / 2 analog outputs - Tool I/O: 3 digital inputs / 3 digital outputs (DO_0/AI, DO_1/RS485-, DO_2/RS485+) - I/O power supply: 24 V 2.0 A (cabinet), 24 V 1.5 A (tool) - Arm protection rating: IP65 - Typical power consumption: 400 W - Power supply: 24–60 VDC - Operating temperature: 0–50 °C - Cleanroom: ISO Class 3 - Interfaces: 2× COM, 1× HDMI, 3× LAN, 2× USB 2.0, 4× USB 3.0 - Communication: RS-232/RS-422/RS-485, Ethernet, Modbus TCP/RTU (master & slave); optional PROFINET, EtherNet/IP, EtherCAT, CC-Link - Programming: TMflow (flowchart), TMscript (script), TMcraft (developer); teach-in by manual guidance - Certifications: TÜV ISO 13849-1, ISO 10218-1, ISO/TS 15066; SGS UL1740, CAN/CSA Z424-14 (R2019); CE, NSF/ANSI 169 (optional), SEMI S2 (optional) Applications: pick & place, machine loading, light palletizing, assembly, integration on AMR. Optional training: training on operation can be provided by Gessmann, for an additional €2,800. Inspection and pickup by appointment.

Condition: new, Year of construction: 2020, Cantilever racking – NEW Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Center distance: 131 cm - NEW – immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized finish. - Cantilever arms in hot-dip galvanized finish. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Racking consists of: - 04 x uprights, incl. base approx. 416 cm, made of IPE160. Kdsdpfe Aawpqox Acpeu - 12 x cantilever arms approx. 120 cm, made of IPE 100 - incl. all necessary connecting elements and screws. Why BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities of the racking uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed both indoors and outdoors and will not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets according to DIN EN 15048-1. - Long reorder guarantee - Upright base and upright back are welded together, providing additional safety and shorter assembly times, as the feet do not need to be screwed to the upright back. - Connections made of angle steel, eliminating the need for adjustment with tensioning bolts. This shortens assembly time. - No elongated hole system, thus no weakening of the upright profile. Price: €2,653.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Our recommendation: Let us know your requirements… We will be happy to assist you in realizing your projects, from planning to ordering to assembly. Delivery can be arranged by us at a favorable price upon request.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Kjdjxv A T Nepfx Acpjdu Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, This listing is for a IKA Euro-star 100 D S002 Overhead Stirrer The unit is in full working condition and is ready for immediate release The IKA Eurostar 100 D S002 is a powerful laboratory overhead stirrer designed for a wide range of applications, ideal for mixing volumes up to 100 liters of water (H₂O). Engineered for precision and durability, it’s perfect for laboratories needing reliable and consistent mixing performance. Specifications Speed Range: 0/30 to 1300 rpm Maximum Stirring Capacity: 100 liters (H₂O) Maximum Viscosity: 70,000 mPas Maximum Torque: 100 Ncm Motor Rating Input/Output: 186 W / 136 W Motor Type: Maintenance-free brushless DC motor Chuck Range: 0.5 to 10 mm Protection Class: IP 42 Interfaces: RS 232 and USB for control and data documentation Dimensions (W x D x H): 86 x 208 x 248 mm Weight: Approx. 3.9 kg Power Supply: 230 V, 50/60 Hz Key Features Digital TFT Display: High-visibility screen for real-time parameter monitoring Removable Wireless Controller: Enhances ease of use and flexibility Microprocessor-Controlled Speed Regulation: Automatically adjusts speed to maintain precision within the set range, even with changes in sample viscosity Integrated Torque Trend Display: Enables real-time monitoring of viscosity changes Safety Systems: Built-in overload and anti-stall protection with automatic shut-off Kedjxv Dg Rjpfx Acpjdu Quiet Operation: Low-noise performance for lab comfort Push-Through Agitator Shaft: Allows quick removal and easy cleaning Error Code Display: Notifies users of system alerts or issues Constant Speed Maintenance: Ensures uniform mixing, compensating for viscosity fluctuation

Condition: used, This listing is for the Hanwell 4000 Wireless Transmitter The unit is in full working condition and is ready for immediate release Kodpfx Acjxv D H Ropodu Key Features: Single & Dual Channel Options: Choose between single or dual thermistor channels to suit your monitoring needs. ​ LCD Display: Equipped with an LCD display showing real-time data readings and battery life. ​ Temperature Range: Measures temperatures from -40°C to +60°C, accommodating various storage conditions. ​ Long-Range Wireless Transmission: Utilizes low-power radio technology with a transmission range of up to 3 km over open ground. ​ Battery Life: Powered by a 3.6V AA lithium battery​ Memory Capacity: Stores up to 100,000 readings for single-channel units and 50,000 readings per channel for dual-channel units. ​ Applications: Ideal for monitoring temperatures in fridges, freezers, and chillers. ​ Compatible Sensors The transmitters are compatible with various thermistor probes, available separately, to meet specific monitoring requirements. ​ Specifications at a Glance Feature Specification Dimensions 110 x 80 x 35 mm Weight 200 grams Power Supply 3.6V AA Lithium Battery Battery Life Up to 2 years Operating Range 0°C to +60°C (non-condensing RH environment) Storage Range -40°C to +60°C Accuracy ±0.1°C Radio Frequency 433–458 MHz (country-specific) Radio Power 10 mW Radio Range Up to 3 km over open ground IP Rating IP30

Condition: used, This listing is for the IKA WERKE RO15 P 15 Position Digital Magnetic Stirrer The unit is in full working condition and ready for immediate release Key Features & Benefits: Synchronous Stirring: Designed for uniform stirring across all positions. Magnetic-Coil Technology: Provides noiseless, consistent stirring on each of the 15 positions, even under varied loads. Powerful Drive: 100% wear- and maintenance-free No moving parts Built for continuous operation Reverse Rotation Switch: Enhances mixing effectiveness. Easy-to-Use Interface: Foil keypad with digital display Error code display for diagnostics Speed adjustable in 10 rpm increments Compact, Closed Design: Protects against spills and is easy to clean. Removable anti-slip mat adds extra security for vessels. Technical Specifications: Number of Stirring Positions: 15 Max Stirring Volume per Position: ~400 ml Speed Range: 0–1200 rpm Plate Material: Stainless steel (1.4301) Plate Dimensions: 280 x 470 mm Power Supply: 100–240 V, 50/60 Hz Protection Class: IP 40 Weight: Approx. 7–8.6 kg Kdsdpfxsxwc E Uj Acpeu Ambient Temp. Range: 5–40°C

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Kdsdpfo Aawyvsx Acpju Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail. Kdedpsylnybofx Acpju

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. Kdodpfx Aoymdpuocpsu If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Kdjdpfxs Aawqhj Acpeu Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), operating hours: 936 h, color: yellow, General information Year of manufacture: 2015 Weights Empty weight: 7.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.500 cm Dimensions of cargo space: 660 x 150 x 210 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 850 m Max swing of arm in degrees: 180 Kdjdpfx Aez Drz Ajcpou Max swing of platform in degrees: 360 Latest inspection: 2026-09-18 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Kedpfezh D Rmex Acpodu Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. Kdedpfx Acs Aaw Adepju - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly. Kjdpfx Aco Aawpdepsdu

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: Kdjdpfx Acs Aawq Uspou - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, Year of construction: 2025, Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Technical details - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module Kdsdpfxjz Eqdxj Acpou - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable Kdodpfjzlbqrjx Acpsu - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Condition: good (used), Feutron Temperature Testing Chamber -40 to +100°C The Feutron TPK 3403/125, thanks to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Kedpfjy Nynaex Acpsdu Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sample testing: Tests carried out during production to ensure that the production process meets the specified temperature ranges. Standard testing: Conducting tests according to common industry standards (e.g., DIN EN 60068), which prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Kjdpfjxv Abgsx Acpodu Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Kodpfozzd Rtjx Acpedu Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disc laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disc laser technology and combine short pulses and high pulse energies, even at high frequencies. This enables you to remove layers and contaminants at maximum speed, reducing your cycle times. Optimize your processes further by varying the repetition rate while maintaining a constant pulse duration. For efficient and economical cleaning of tire molds, the short-pulse lasers of the TruMicro Series 7000 are the ideal tool. Large-area applications with high average power: Removing material, cleaning, tempering: The lasers of the TruMicro Series 7000 demonstrate their full performance in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous material removal rates. A scanner ensures excellent utilization of the power. Flexible laser light cables transport the light where it needs to be, facilitating the integration of the laser. Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System input power: 380–460 VAC, 3 phases Laser power: 750 W Wavelength: 1030 nm Kdodpoxaktlefx Acpsu Pulse energy: 80 mJ Pulse duration: 30 ns Beam quality: 20 mm Repetition rate: 5 to 100 kHz Fiber diameter: 400 µm IP rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with receiver The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Kdodpfexv A Dbox Acpou Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Kdjdpjzh U Sbsfx Acpju Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.