Used Linck Model Turning Device Linck Dv 55 for sale (37,565)

Condition: new, load capacity: 1,000 kg, Column lift turning device 1000 kg load capacity, mobile with 2 pallet trucks Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of manufacture: 2024 Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm (adjustable at extra cost) Vertical adjustment: 900 mm Clamping plate diameter: 500 mm Rotary drive: 0.4 kW Hsdewulnpepfx Af Honp Lifting motor: 2 x 0.4 kW Various column lift turning devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition Hsdsrwq Uropfx Af Hsnp

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement Hedpoib D H Rjfx Af Hsnp - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,000 rpm, travel distance X-axis: 48 mm, travel distance Z-axis: 236 mm, spindle motor power: 750 W, total height: 400 mm, overall weight: 85 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 810/840D Turn/Mill control, number of axes: 2, Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum part length: 215 mm • Spindle/Workholding • Spindle connection: factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Through hole in chuck: 15 mm • Automatic chuck diameter: 76 mm • Mechanical speed steps: 2 • Maximum torque: 14 Nm • Tooling • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/Drives/Accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Position scatter X: 0.008 mm • Position scatter Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MK1 • Automatic tailstock quill stroke: 15 mm • Lubrication • Guideways: oil • Other lubrication points: grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % • Frequency: 50/60 Hz • Max fuse: 12 A • Dimensions/Weight/Noise • Axis height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) • Slight corrosion on machine components (common for comparable machines) • 4+4 station tool turret • Tailstock MK1 including quill and center point • 3-jaw chuck installed, no additional jaw sets included • Collets available, but no collet chuck • No drill chuck (MK1) and no drill bits included Hedpfxjy H Etco Af Henp • Tools available as shown in images • 5.5 mm Allen key included • Siemens Sinumerik 810/840D Turn/Mill control (PC & CD) • License key included, likely transferable • Operating manual and machine documentation included • Data carriers included Technical Specification Driven Tools No Counter Spindle No

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Hnedpfx Asv Sag Nsf Hop Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, workpiece weight (max.): 10,000 kg, – Capacity 10 tons – Minimum workpiece diameter 600 mm – Maximum workpiece diameter 3700 mm – Roller diameter 250 mm Hsdpfx Afev Dbz Eo Hsnp – Wireless remote control – Digital speed display – Emergency stop – Documentation – 400V

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity 1000 kg – Workpiece minimum Ø 50 mm – Workpiece maximum Ø 800 mm – Roller diameter 250 mm – Continuously adjustable speed – Foot pedal Hnjdpjv A Rrkofx Af Hop – Emergency stop – Documentation – 230V

Condition: new, - Load capacity 5000 kg - Workpiece minimum Ø 250 mm - Workpiece maximum Ø 2300 mm - Roller diameter 250 mm - Wireless remote control - Digital speed display - Emergency stop - Documentation Hnsdeqy Nr Hepfx Af Hjp - 400V

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: - Load capacity: 1500 kg - Tare weight: 300 kg - Insertable workpiece diameter: approx. 50 - 3000 mm - Roller diameter: 250 mm Hnsdpfod Iuqljx Af Hjp - Roller width: 50 mm - Rotational speed: approx. 100 - 2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: Hnodpfxod Iuqao Af Hjp - Load capacity: 15,000 kg - Tare weight: 960 kg - Workpiece diameter: approx. 50 - 3200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotational speed: approx. 100-2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2022, condition: new, Technical data: - Load capacity: 10,000 kg - Tare weight: 850 kg - Workpiece diameter: 50 - 3500 mm - Roller diameter: 250 mm Hodpfxefxw H Ae Af Hjnp - Roller width: 160 mm - Rotation speed: approx. 100-2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2023, condition: new, Rotating device for handling components weighing up to 40,000 kg. Component diameter range: 500 mm to 6,000 mm. Rotation speed: 100 to 2,000 mm/min. Control via handheld remote control (optional: wireless). Hedeflmcxopfx Af Henp

Year of construction: 2020, condition: new, Height-adjustable rotating device for machining or assembly of turbine rotors, rollers, or shafts, designed for use under load. Load capacity: 20,000 kg Hnedpefw Afkofx Af Hep Stroke: 400 mm Roller diameter: 350 mm Mountable component diameter: D180 mm - D900 mm Roller material: TEXMAT-500

Year of construction: 2020, condition: as good as new (ex-display), 1x Drive unit with chassis 1x Follow-up unit with chassis and height adjustment Hsdpfxefxgrdj Af Henp - Centric roller support adjustment with hand crank - Manual height adjustment, locking with locking pin - Adjustable height difference: 0-350 mm - Load capacity: 2,500 kg / unit - Component diameter: 200mm – 2,000mm - Running rollers: PUR wheels - Dimensions Length/Width: approx. 1,900mm x 460mm - Chassis track width: 1435mm - Rotation speed: 0 - 2,000 mm/min - Operation: Handheld remote control and foot switch

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Hodpfx Afoxxmf Ij Henp Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm Hnsdpet Run Iefx Af Hjp - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Condition: excellent (used), Pneumatic holding and clamping device from Linck. Hedpjrdvggsfx Af Henp

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Hnjdod Siydepfx Af Hep Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) Hnsdpfx Aoc Ux Tmef Hsp 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Hnsdpfx Afec Ux Tls Hep Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Hjdpfxswkpzls Af Hjnp Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: Hodpfshcnhmox Af Henp - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 2008, condition: used, machine/vehicle number: 820505-01+02, Lg. no. 24208 + 24209 2 pcs. Load turning devices Technical data : Hjdpfxetpbwho Af Honp - Load capacity per ROTOMAX 25 t - max. torque 14000 Nm - Rotation speed 2.6 m/min - Operation via manual remote control with intermediate cable - Length of intermediate cable approx. 8 m - Load turning belt with 160 mm belt width - Mounting pin 140 mm - Connection 400 V / 3.0 kW each - Space requirement per unit approx. W 2200 x H 1300 x D 900 mm - Weight per unit approx. 2100 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Item No. 21392 Approximate technical data: - Total load capacity of driven and idler unit: 25,000 kg - Load capacity per container device: 12,500 kg - Workpiece diameter (approx.): 500 - 4,000 mm - Adjustable center distance of support rollers - Roller diameter: 400 mm - Roller width: 120 mm - Infinitely adjustable rotational speed - Handheld remote control for forward and reverse operation - Drive: 400 V - Space requirement of driven unit (approx.): W 3500 x H 850 x D 1000 mm Hnjdpfx Ask Eatdsf Hsp - Space requirement with idler unit (approx.): W 2700 x H 850 x D 800 mm - Weight of driven unit (approx.): 1,300 kg - Weight with idler unit (approx.): 900 kg

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm Hodpfxsnwmt Io Af Henp - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg