Used Loading System For Walking Floor for sale (59,146)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Lajdpfx Ajy Urtfsfwsf Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, maximum load weight: 28,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 02/2027, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, 3-axle STAS S 300ZX sliding floor semi-trailer, 92 m³ VIN: 000929 Chassis / Components: * Air suspension / Raise and lower function * Lift axle 1st + 3rd axle * Weweller support legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: Front ~90%, Middle 90/70%, Rear ~90% * 3 x Jost axles with disc brakes * Wabco Smart Board * PVC storage box STAS * 1 x Spare wheel carrier Body: * Sliding floor system Cargo Floor * Service flap (inspection window) on the left * Volume: approx. 92 m³ * Roll-over tarp * Standing platform with walkway on the left * Remote control Weights: * Gross vehicle weight: 36,000 kg * Payload: 28,150 kg * Tare weight: 7,850 kg Other: * German registration * MOT valid until 02/2027 New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On an area of 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Ljdpfx Aezuqh Sofweaf Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export license plates/short-term license plates. Processing of customs formalities We will gladly help you with customs matters.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 674) First registered: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm TÜV (technical inspection) valid until: 06/2027, main inspection valid until: 12/2026 Roll-up tarpaulin, platform Clean floor, end pieces, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear, grain sliding hatch Lsdpfx Aezful Njfweaf Remote control Cargo floor LED work lights + reversing lights 2 x 12-tonne, 2-speed geared winch Shovel and broom holder on the driver’s side, front Storage box, plastic, driver’s side, center Air suspension with raising and lowering function 1st lift BPW drum brakes Tires: 385/65R22.5, 1st tire approx. 70/80%, 2nd tire approx. 80/90%, 3rd tire approx. 60/60% ALCOA aluminum rims Extension ladder on the passenger side, rear Ladder behind the fifth wheel Half-shell fenders Price: €23,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software expansion: Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos. Lajdpfxszmyfwo Afwof

Condition: used, maximum load weight: 31,335 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 01/2026, loading space volume: 92 m³, Equipment: ABS, Sliding floor trailer with conical trough design, 92 m³ volume, 385/65 tires, ABS, ESP, 3x9 t SAF B9-22S Intradisc CD IO37 axles with 22.5 inch (430 x 45) disc brakes, ET 120 2040/1200; 9 t BPW SRBF Eco Air axle with 22.5 inch Eco Disc TS2 disc brakes ET 120; Wabco braking system with control box; lift axle on the first axle; automatic raising and lowering / starting aid controlled via EBS; Rectus 26KA air connection; 6x steel rims 22.5x11.75 inch ET120; Europoint 3 Hybrid lighting; 2x LED work lights mounted inside, in the upper corner of the front wall; floor: aluminum, 21-plank, 8 mm, smooth surface; hydraulic connection at front wall; radio remote control; ladder on the right of the front wall or on the front wall door; 12 pairs of lashing rings embedded in the side floor profiles in pairs; 2x round 80 mm bows (not swiveling) + 1x round 50 mm front + 1x round 50 mm rear; wear plates left/right at the rear section inside, aluminum 1250x2500x3mm; 2 rail cleaners made of plastic, attached to the carriage with a chain; plastic toolbox; roll tarp with tension belt; foldable A-board (rear side in body color white); side underrun protection with plastic plate; Rollfix. Ljdjzp Tgtspfx Afwsaf

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) Laedpeyrvt Aefx Afwjf * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control * Hydraulic connections centred on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Condition: used, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 05/2026, total width: 2,550 mm, Equipment: ABS, German semi-trailer Ledpfx Afeym Hypswjaf 1 owner Walking floor Hydraulic protective tarpaulin over the trailer Hydraulic tailgate Lifting axle

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Container loading system (Fullfiller), the fast and uniform loading of granulated products and pellets into ISO containers. Standard capacity: up to 240 m³/h. Main motor power: 11 kW. Includes feed hopper, throwing unit, auxiliary ventilation system, electrical panels, controls, platform, guardrails and access ladder. Serial No.: 488981. Laedpfjzvcyvex Afwof

Condition: used, maximum load weight: 24,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2013, loading space length: 13,600 mm, loading space width: 2,440 mm, loading space height: 2,600 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2013, Equipment: ABS, For sale: 1 Schmitz trailer * Second-hand * Manufactured in 2013 * New inspection certificate * Good tires If you have any questions, you can reach us during the day: Ledpfxszr A Nve Afwjaf Richard Kanwischer (telephone and WhatsApp: German and English) Paul (telephone and WhatsApp: German, Russian, Ukrainian) Paul (Viber)

Condition: used, maximum load weight: 28,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 07/2026, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,665 mm, Year of construction: 2022, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 607) Registration Date: 07/05/2022 Type: RSBS-3-10/C3V Permissible Gross Vehicle Weight (GVW): 35,000 kg Unladen Weight: 6,680 kg Payload: 28,320 kg Overall Length: 11,000 mm Overall Width: 2,550 mm Overall Height: 3,665 mm Load Volume: approx. 65 cbm TÜV (technical inspection): 07/2026, SP (safety inspection): 01/2027 Rollover Tarpaulin, Platform Clean floor, end panels, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear with grain slide Remote control Cargo Floor system LED work lights + reversing lights 2 x 12-ton, 2-speed gearbox winch Storage box, plastic, passenger side, rear Air suspension with raising and lowering function 1st lift axle SAF disc brakes Tires: 385/65R22.5, 1st tire approx. 70/60%, 2nd tire approx. 60/50%, 3rd tire approx. 60/80% Half-shell fenders Access ladder Laodpfozq Tm Nox Afwof Price: €30,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: used, empty load weight: 7,840 kg, maximum load weight: 28,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | STAS sliding floor | Type S300ZX, remote control | Tool box | 1 axle lift | Air suspension | Spare wheel holder | Unladen weight 7,840 kg, payload 28,160 kg | Tires: 385/65 R22.5 | SAF axles with disc brakes | Valid inspection report until 04/2026 | 10mm floor | Subject to errors, typing errors, and prior sale. Laodpfxjzr R A Rs Afwef

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Laodpfx Afey U Syrjwof Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Accessories PVC mud flaps w

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Lajdpsgcw Riefx Afwef Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY Lodpfx Aezn Drdsfwjaf * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: used, empty load weight: 8,070 kg, maximum load weight: 27,930 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, had accident, | Knapen K100/KT01 Walking Floor Trailer | Remote Control | 10 mm Floor | Roll-over Cover, Standing Platform | BPW axles with disc brakes | 1-axle Lift | Toolbox | Spare Wheel Holder | Tare weight: 8070 kg | Austrian vehicle | Subject to errors, typos and prior sale. Lajdpjzrxbbefx Afwsf

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR – Walking Floor 70 cbm, fully equipped First registration: 06/2024 Mileage: 77,648 km Dimensions (L x W x H): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Saddle height: 1,250 to 1,300 mm Overall height: 3,900 mm Ledpjzmqmrsfx Afwoaf SAF axles "Off-Road" with large disc brakes, 430 mm WABCO trailer EBS with RSS stability program Chassis: Fine-grain steel, hot-dip galvanized Forced steering on the 1st and 3rd axles, TRIDEC system with rod steering 3 central lubrication points, positioned externally Tire size: 6 x 445/65 R 22.5 Cargo Floor, AGRAR version, with 15-plank system, reinforced design, 10 mm WIRELESS remote control for floor and rear door Profile supports on the side walls, completely welded from the inside (grain version) 2 reinforced transverse braces Stainless steel wear plate at the rear, under the floorboards Front wall with cleaning door Hydraulic rear door with grain slide Hydraulic connections on the front wall and additionally on the support legs PNEUMATIC DIVIDER POSITIONER RENTING is the new BUYING; with us, it is also available immediately in a full-service rental.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 07/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,650 mm, loading space volume: 91 m³, Year of construction: 2021,

Condition: used, functionality: fully functional, empty load weight: 5,520 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2019, next inspection (TÜV): 12/2026, loading space volume: 27 m³, suspension: air, tire size: 385/65/22.5, tire condition: 60 %, wheelbase: 1,310 mm, color: red, trailer brake: trailer braked, Year of construction: 2019, Equipment: ABS, Schmitz steel tipper with steel chassis, hydraulically opening tailgate, 27 m³, lift axle, roll cover, platform, foldable underrun protection, aluminum rims, Schmitz axles with disc brakes, toolboxes, water tank, German-made semi-trailer. Sale only to commercial businesses and with the exclusion of any warranty. We deliver to any German seaport. Lasdpfx Aszp Dxaofwjf

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2015, loading space volume: 93 m³, Equipment: ABS, Stas S300ZX Year of manufacture: 2015 93 cubic meters Lsdpfxjzuu I Nj Afwoaf Lift axle Plates: 10 mm Remote control ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/p?????/?????... Roman We will gladly assist you with financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2000 €. Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: new, maximum load weight: 28,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen moving floor trailer K 100 A5060, 92 m³ * BPW axles * First axle configured as a lift axle * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * 385/65 R22.5 tires * Gear support winches with push compensation * Plastic toolbox * 10 mm floor, 21 planks Lodpfx Aoyhtn Nefwsaf * Stainless steel wear plate under the floor * Radio remote control for floor, lift axle, and auxiliary headlights * Round bows * Manual rolling tarpaulin * 3-position tarpaulin supports * 1 pair of red LED lights on the rear bow * Side marker lights with indicator function * Reverse warning system * 6 additional reversing lights: at the landing gears, behind the last axle, and on the lighting bracket * Foldable and painted A-plate on the left rear door * Tarpaulin color similar to RAL 9006 * Body painted in RAL 7011 iron grey * Chassis galvanized, not painted !!! The stated sale price is fixed ex works at Knapen Trailers in NL-Deurne !!!

Condition: good (used), functionality: fully functional, machine/vehicle number: VAVJS1339RH529050, empty load weight: 7,750 kg, maximum load weight: 31,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2024, Equipment: ABS, our vehicle number #31042 3x SAF axles Tire size 385/65 R 22.5 Permissible total weight 39,000 kg Payload 31,250 kg Unladen weight 7,750 kg Body dimensions i.e. L: 13,400 mm W: 2,470 mm H: 2,750 mm V: 89 m³ Color Pure white RAL 9010 Mileage 119,995 km Lift axle A1 + A3 Portal doors Disc brake Cargo Floor XD X-treme Durable, 7 mm electric roll cover "Quick TOP" Cleaning door front left Moving wall simple external twist locks Alcoa DuraBright EVO aluminum rims Lsdozp Hxcspfx Afwjaf Wabco Smart Board RSS (Roll-over Stability Support) ABS/EBS Raise/Lower Telematics "LOCAL TRAC" Tire pressure monitoring Rear view camera Remote control pneumatic door locking Jost fifth wheel LASi EN 12642 XL Forklift accessible, 8 tons Side protective cover left Platform with ladder LED lighting various accessories Protective flap for rear lights Side UFS (Underride Protection System) 2x W-box 1x water tank Broom holder NATO canister Financing possible upon request!!!

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 12/2026, total length: 25,500 mm, total width: 40,000 mm, Year of construction: 2015, Equipment: ABS, * Advertisement/Vehicle No.: MTE17A * Office: * WhatsApp: * Mobile: * E-mail: * Website: Rental of various trucks + semi-trailer trucks + trailers for short-term or long-term rental, 7.5t from €699.00 and 18t from €1,000.00 per month, available on short notice! Please contact us. 1x Knapen sliding floor K 100, SAF axle + lift axle, tires 385/65 R 22.5 front/rear + lift axle, TÜV (technical inspection) valid until 12-26, main inspection valid until 06-26, main inspection can be renewed for an extra charge! ???? Special offer???? Acquire a complete truck and semi-trailer combination with a MAN TGX 18.4 "special price on request" > contact us directly via WhatsApp! Net price - trade-in possible - Ljdey T Dq Hjpfx Afwoaf Rental/financing/leasing brokerage - Subject to changes, prior sale, typographical errors and mistakes! We only deal with well-maintained German vehicles. Our services: all customs and export documents, Euro 1 * Short-term license plates / 5 days * Customs license plates / 30 days * Vehicle delivery * Vehicle pickup * Main inspection and safety check Our contact details and opening hours: Office: * WhatsApp: * Mobile: * E-mail: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment

Condition: used, empty load weight: 7,620 kg, maximum load weight: 31,380 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2016, next inspection (TÜV): 01/2027, loading space length: 13,360 mm, loading space width: 2,470 mm, loading space height: 2,640 mm, loading space volume: 87 m³, total length: 13,360 mm, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: brown, Year of construction: 2016, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69816 Schwarzmüller, moving floor trailer * Year of manufacture: 2016 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Load securing certificate DIN EN 12642 Code XL * Portal doors * Air connection coupling heads (red + yellow) * Connection plug 2x7-pin * Connection plug 15-pin * Lifting and lowering device * Storage/toolbox * Platform * Sliding tarpaulin * Inspections: Main/Emission test valid until 01.2027 * Suspension: air * Gross weight: 39,000 kg * Unladen weight: 7,620 kg * Payload: 31,380 kg * Permissible gross weight: 39,000 kg * Axle manufacturer: SAF * Tire condition axle 1: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition axle 2: 60% -- 50% - Tire size: 385/65 R22.5 * Tire condition axle 3: 40% -- 30% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Internal dimensions: L=13,360 mm, W=2,470 mm, H=2,640 mm * Internal volume*: 87 m³ * Pallet spaces: 33 * Cargo Floor, 8 mm floor thickness * Only used for transporting wood and wood chips * Fifth wheel height: 1,160 mm * LED lighting * Aluminium air tanks * Stainless steel underrun protection * Upon request, we will provide a build description and more pictures Disclaimer: Subject to change, prior sale, and errors. For additional pictures and videos, please visit our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing Lodpfx Afsyicipjwoaf * Handling of all (export) documents * Arrangement of export plates/customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV certification, registration service * Transit of commercial vehicles Ask our trained professional staff, we will be happy to advise you.

Condition: used, maximum load weight: 31,229 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 02/2027, loading space volume: 92 m³, Equipment: ABS, Due to the countless phishing and spam emails, email inquiries can only be processed if a valid telephone number is provided! Unfortunately, we cannot process email inquiries without a telephone number! We ask for your understanding. Ljdpozr Tfuefx Afweaf For telephone inquiries and WhatsApp, please contact us regarding the following: * Complete unit with DAF XF 480, first registered 01/2021 * The Kraker was only used to transport soft goods (wood chips, recycled paper, etc.) * Volume: 92 m³ * Integrated high-pressure cleaner * Radio remote control * Lift axle * BPW axles with disc brakes * Tarp system * Unladen weight: approx. 7,771 kg * Tires: 385/65 R 22.5 * Tread depth: 13/10, 15/9, 11/11 mm The quoted price refers only to the Kraker walking floor! Subject to errors and prior sale.

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Ljdpfx Afowvhrtjwoaf Year: 2011