Used Mech. High-Performance Automatic Press (1045) for sale (42,913)

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm Dodpevuk E Usfx Apwskl table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier Dodoyz Dtdspfx Apwekl - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm Dkedpoy En I Hsfx Apwsl - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Dodpfx Apoinzdlowjkl Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: good (used), Year of construction: 2004, KAISER Press KSTU 1600 - 15 - 3 PSR Pressing force 1,600 kN Stroke rate 20 - 260 1/min Adjustable stroke 20-120 mm Ram adjustment 120 mm Installation height 400 mm Djdpfey Ev Syjx Apwekl Including strip feeding line

Condition: used, Year of manufacture 2007 Connection 400 V 16 A CEE 5.5 kW 630 m³/h Dkedpfoy Ec T Dox Apwol Functional video available.

Condition: good (used), Year of construction: 1999, KAISER Press KSTU 3150 - 20 - 5 RK Press force: 3,150 kN Strokes per minute: 20-150 1/min Stroke adjustment: 20-180 mm Ram adjustment: 150 mm Table area: 2,000 x 1,250 mm Ram area: 2,000 x 1,000 mm Installation height: 600 mm FECKER strip feeding line Dksdpfx Ajy El S Aopwol Strip width: 30-600 mm Strip thickness: 0.3-8.0 mm Max. coil weight: 8,000 kg

Condition: good (used), Year of construction: 2000, Kaiser Press KSTU 3500 - 25 - 6 P Press force 3,500 kN Stroke rate 20–100 1/min Stroke adjustment 40–250 mm Ram adjustment 200 mm Table area 2,500 x 1,250 mm Ram area 2,500 x 1,100 mm Installation height 700 mm Dkjdpey El Iqofx Apwol Dreher strip feeding line Strip width 30–600 mm Strip thickness 0.3–3.0 mm Max. coil weight 3,500 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, High-Performance Machining Center ELHA DEPO XPERT K 1212 incl. Automation Manufacturer: ELHA Maschinenbau Model: DEPO XPERT K 1212 Year of manufacture: 2018 Condition: Used, industrial plant / project-specific configuration Availability: Immediately For sale is an ELHA DEPO XPERT K 1212 machining center offered as a complete manufacturing system including automation. The system was designed for industrial series production and is suitable for demanding applications in mechanical engineering and the automotive sector. Technical data – Base machine • Y-axis 1,200 mm, Z-axis 1,000 mm • Slide for fixed milling heads • CNC control BOSCH MTX – Electronic handwheel • Prepared for optional tool measurement via laser system • Prepared for optional additional axes (2 axes) – connection in the work area • Air supply through the inner spindle (ILZ) • Prepared for optional coolant system and IKZ (internal coolant supply) • Operator platform • Safety enclosure work area / operator side • Prepared for DEPO TELESERVICE remote diagnostics Special equipment: Rotary axis beneath the base machine, positioning axis 2 x 180°, additional safety wall for work area/operator side Workpiece carrier systems: 1 Rotary-shifting table, X = 1,500 mm, endless B-axis, simultaneous operation. Transport weight (workpiece + clamping fixture) max. 25,000 kg. Faceplate with star-shaped T-slots 1 Work area enclosure with automatic lifting door for loading and unloading, as well as manual access door on operator side (see project drawing) 1 Application-specific conversion of the rotary-shifting table adaptation for clamping fixture incl. media supply adaptation/optimization of drive axes (X and B axes) DEPO XPERT 30 fork-type milling head with integrated A and C axes, simultaneous operation incl. motorized milling spindle 1 motorized milling spindle 6,000 rpm, 400 Nm, HSK 100, 42 kW 1 alternative quick-change tool system for 12 tools HSK 100 8 sets of basic tooling, each consisting of 2 special tools (including tool holders, indexable inserts, solid carbide drills) 1 automatic clamping fixture 1 process development (tool and process optimization), see details on page 4 1 interface DEPO XPERT K – automation system 1 automation system consisting of: Gripper system for workpiece handling Protective enclosure for the automation system incl. access door Performance data Workpiece weight up to approx. 25,000 kg Designed for high-volume series production Dksdpsy Edptjfx Apwel Modularly expandable Inspection possible by appointment at any time. Dismantling, transport, shipping, and reinstallation can be organized. If you have any questions, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg All prices are net plus VAT. Subject to prior sale and errors excepted.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Dksdpfx Ajxwp Nyepwol Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Dkjdsw S Hv Ijpfx Apwjl Please contact us for more information!

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Dodpfxeflrhzo Apwekl Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: not inspected (used), functionality: unexamined, rotational speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Speed: 40,000 rpm MACHINE DETAILS Length: 670 mm Dksdpfeyr R Nxox Apwjl Width: 350 mm Height: 400 mm Weight: 70 kg EQUIPMENT (Currently no information available)

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t Dkedpfxsyx Ii Ds Apwol dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm Dkodpfx Aoylzw Hjpwsl no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm Dkedjwc U Nlopfx Apwjl hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available Dedpfjvuugcsx Apwjkl

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm Dkodpfx Aovuubaspwsl no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS Dkodpfx Ajx U Eiaspwel - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Dkedpfx Apsv U R Agewel Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Year of construction: 2025, operating hours: 15 h, condition: like new (used), functionality: fully functional, input current: 230 A, machine/vehicle number: 202505, Absolutely like new! Demo unit (price incl. 19% VAT) - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Scope of delivery - Starter accessory set consisting of: - 1 × rectangular pan, smooth, 260 × 260 mm - 1 × round snack pan, Ø 190 mm - 1 × round snack pan, Ø 250 mm - 1 × tong for 50 bowls - 1 × turner, 360 mm - 1 × silicone tong, 260 mm - Power cable Housing & design - Color: Red / Stainless steel Technical data - Dimensions (H × W × D): 420 × 540 × 500 mm - Power: 3,000 W - Weight: 29.5 kg - Connection: 230 V / 50 Hz / 16 A The speed oven is a compact high-performance unit for professional use in the catering industry. It is suitable for rapid cooking, baking, and heating of various dishes, designed for efficient workflows with high output. The speed oven features a non-stick coated cooking chamber and integrated exhaust air management. Thanks to TRIAC circuitry, the device allows for precise operation and consistent power regulation. Dodpfx Apoyxy R Tjwskl Low odor, enables roasting characteristics without fat or oils ... Functionality - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Extensive accessories available, such as steak contact plates... (Source: Website Reamotion Delmenhorst)

Condition: excellent (used), Year of construction: 2002, Manufacturer: ARISA Type: S-2-630-350-FS Pressing force: 6,300 kN Table size: 3,500 x 1,450 mm Ram size: 3,500 x 1,400 mm Stroke adjustment: 25–300 mm Installation height: 700 mm Dodpfx Aoyx S Iwepwekl Ram adjustment: 300 mm Strokes per minute: 20–70 Control system: SIEMENS S7 Including DIMECO coil line

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l Djdoxw T Ugepfx Apwekl - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm Djdeywxraopfx Apwekl • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: new, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering. Dksdpeymf Swjfx Apwjl