Used Milwaukee Construction Machine for sale (76,406)

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Brand: Verdegro Type: LLTT-H Year: 2016 Chedpfx Aswhmqrsb Dsb Solar power system (350 W) High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Condition: used, functionality: limited functionality, Year of construction: 1990, Electric drilling rig. New electric motor. Chsdpfxey Skwqs Ab Dsb

Condition: used, functionality: fully functional, Year of construction: 2003, Drilling rods 3.5"/2.375" Codpfsy Skyxex Ab Dohb Length: 10 feet (3.05 m) and 5 feet (1.52 m) Total length: 200 feet (61 m) Some flush chisels included

Condition: ready for operation (used), functionality: fully functional, Kawasaki K5V80DTP-173R-9K0E-1 main pump for Hitachi Zaxis 130W, Hitachi part no. 4601510. Service exchange unit. When we exchange the regulators with those from your old unit, the pump is also suitable for Hitachi Zaxis 160W. Csdpfx Aeyg Nwkeb Dehb

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Chodpeydvzdofx Ab Deb Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Year of construction: 2020, operating hours: 2,213 h, condition: used, Albach Diamant 2000 Wood Chipper Year of manufacture: 06/2020 Engine hours: 5,730 h Rotor hours: only 2,213 h! Cjdpoy I Ihrsfx Ab Dohb Engine: Volvo TAD 1643 [770 HP / 566 kW] without AdBlue (!) Rotor: GEN 7, 23 degrees Feed width: 1,230 mm Feed height: 980 mm Rotor speed: up to 420 rpm Max. throughput: 450 m³/h Accelerator: GEN2 Speed: 80 km/h Crane: Epsilon S110 Max. reach: 10.1 m Load at 10.1 m: 1 t Grapple: Epsilon FG 31 Tyres: Nokian 645/65 R42 high speed (80 km/h) Lifting cab 2x front stabilizers Rockinger trailer coupling Central lubrication system Compressed air hose reel + compressed air in cab 2x 230V sockets 2x fire extinguishers Remote control for discharge chute Dometic refrigerator, radio Discharge and rear cameras Passenger seat Dimensions: Length: 10.43 m Width: 2.55 m Height (cab raised): 3.95 m (eye-level at 4.80 m) Weight: 32,000 kg Viewings by appointment only. Upon request, we can offer you leasing or financing options. Mr. Mihm (Tel.) will be happy to assist you. Further information is available on our website. Subject to errors and prior sale! ABS, central lubrication system, road approval = Further information = Please contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. Cjdpfxjzav D Do Ab Dshb TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Cedpfx Aow U Sf Tob Dshb Spindle taper BT40, 24 station ATC

Condition: excellent (used), functionality: fully functional, fuel type: electric, color: green, operation weight: 9,000 kg, Year of construction: 1976, Description For sale is a well-maintained Schwarz & Wirtz PERFECT WE100 semi-automatic pipe bending machine—a robust and reliable solution renowned for its precision and long service life. The WE100 series is widely utilized in industrial fabrication, shipbuilding, construction, metalworking shops, and piping industries due to its strong bending capacity and dependable performance. This unit is in good working condition and has only operated in a professional workshop setting. All functions have been tested; the machine delivers precise bends even at maximum specifications. Included is a complete set of bending dies and mandrels (doorns) for both SCH40 and SCH80 pipes, making it ready for immediate production use. A demonstration video is available upon request. Technical Specifications Brand / Model: Schwarz & Wirtz PERFECT WE100 Machine Type: Semi-automatic pipe bending machine Maximum Pipe Diameter: DN100 Maximum Wall Thickness: 10 mm Drive / Power: Heavy-duty industrial-grade Bending Capability: Suitable for carbon steel piping, hydraulic piping, gas lines, and industrial tubing Operation: Semi-automatic operation with manual adjustments Condition: Mechanically sound, no functional faults detected Included Tooling (Dies & Mandrels – Complete Set) The machine is supplied with a full tooling package for both Schedule 40 and Schedule 80 pipe bending: Bending Dies + Mandrels (Doorns): - DN50 – SCH40 & SCH80 - DN65 – SCH40 & SCH80 - DN80 – SCH40 & SCH80 - DN100 – SCH40 & SCH80 This comprehensive set greatly enhances the machine’s production flexibility and overall value. Highlights & Advantages ✔ Fully operational and tested ✔ Good mechanical condition ✔ Complete die & mandrel set included (rare and valuable) ✔ Heavy-duty bending capacity ✔ Suited for demanding industrial applications ✔ High-quality German manufactured build ✔ Ready for immediate deployment ✔ Operation video available on request Condition Report - Mechanically sound - No electrical issues - Hydraulics operating correctly - Bending accuracy verified - Normal signs of use, no major faults Codpjxxkcdjfx Ab Dehb - Always operated indoors in a professional workshop environment

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We offer 2 used screw pumps. Company: Montanbüro GmbH. Machine type: S5/7.5 kW. Year of construction 2017. Fully functional. Chedsvdtagepfx Ab Djb

Condition: refurbished (used), functionality: fully functional, Year of construction: 2026, machine/vehicle number: K5V80DTP, Rebuilt Kawasaki K5V80DTP main pump for 14T excavator Service exchange unit New parts: - Bearings - Cylinder blocks and valve plates - Valve block - Swash plates + mounts - Drive shafts Chsdpsyg Ntxjfx Ab Deb - Seal kit This pump is suitable for Hyundai Robex 140W-9, Hyundai part no. 31Q4-15020 When we exchange the regulators with those from your old unit, the pump is also suitable for (among others): Hyundai R170W-7, R150W-9, R140LC-9, R160LC-9, R180LC-9 Doosan Develon DX140LC-5, DX160LC-5 JCB JS175W Kobelco SK200SR

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Codpfx Aoya H Nkjb Djhb Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, fuel type: gas, Year of construction: 2012, machine/vehicle number: 47101183, Once connected to power and gas cylinder, the mobile gas heaters are quickly ready for use. The ideal units for construction tradespeople: compact and transportable in any passenger car. The gas heaters can be operated continuously between 14 and 96 kW without heat loss. Multi-cylinder systems are available for simultaneous connection to several gas cylinders. Codpfx Ajxpvgvob Djhb

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Chodpfx Aboxftqdj Dsb Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY Chjdpfx Absyhn A Io Dob The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide Cjdpfozb Ipzjx Ab Djhb X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Year of construction: 2006, operating hours: 704 h, condition: used, Rental possible Csdpfxjyxkm Ee Ab Dohb = Further information = Contact Tobias Ebert for more information.

Condition: used, Westtech Woodcracker G850 Root Rake - New machine In stock - Working width: 850 mm - Own weight: approx. 585 kg - Hydraulic flow rate: 40-60 l/min Chsdjyfplfjpfx Ab Dsb - Operating pressure: 200-250 bar - Carrier vehicle: approx. 7.5-15 t - 2x hydraulic gripping arms - Optional: Fine rake attachment Numerous adapter plates available on request. We are an official Westtech Woodcracker distributor and service partner, Magni telehandler distributor and service partner, JCB construction machines distributor and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We offer the complete Westtech Woodcracker range for you! Rental possible = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Cedpfx Aoyzf Najb Djhb Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2014, operating hours: 20,914 h, condition: used, = More information = Please contact Tobias Ebert for further details. Codpfx Aeyxkmxjb Dehb

Condition: used, Year of construction: 2015, Agile 4x4 forklift, lifting capacity 2 tons. Codpfx Abszmgtbj Dshb

Year of construction: 2006, operating hours: 7,913 h, condition: used, Terex Pegson AX 877 E/M Trak jaw crusher, year of manufacture: 2006, operating hours: 7,913, engine: CAT [149 kW/200 hp], magnetic separator, 80% chain undercarriage, remote control, weight: 29,390 kg, German machine Cjdpfx Abezwluxj Dshb On request, we are happy to offer you a leasing or financing package. Mr. Mihm (phone) will be pleased to assist you. More information is available on our website. Errors and prior sale excepted! = Further Information = Please contact Tobias Ebert for more details.

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Maximum flow rate: up to 550 m³/h Codpfjzlz T Hox Ab Dehb Maximum head: up to 26 m Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Maximum immersion depth: 20 m Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.

Condition: used, Westtech Woodcracker G1650 Root Rake - New machine, in stock - Working width: 1650 mm - Own weight: approx. 1610 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle weight: approx. 20-25 t - 2x hydraulic gripping arms - Optional: fine rake attachment Numerous adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telescopic handler sales and service partner, JCB construction equipment dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental possible Chodeyfrglopfx Ab Djb = Further information = New: Yes Contact Tobias Ebert for further information.

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Chedex Rvc Ajpfx Ab Djb