Used Mitsubishi Pa 20 for sale (33,639)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Iodpfori S Hksx Ad Ietl Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 16,297 h, load capacity: 7,000 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,600 mm, drive type: Treibgas, LPG forklift Load centre: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Solid rubber Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 40 - 60% Fork positioner, Itsdpfx Adowtuz Ae Iel 3rd valve, rear work light, front work light, heater, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,609 h, load capacity: 3,500 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Technical condition: good Front tires type: Superelastic Front tires Condition: 60 - 80% Itjdpfounnuvex Ad Ijl Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. In addition to this vehicle model, we have approx. 120 other forklift trucks of all weight classes in stock in our warehouse in Meschede-Calle. Visit our homepage - rf-stapler installment plan & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our master forklift workshop specializes in repairing, servicing and overhauling your old forklift truck. We are also happy to display your vehicle for sale. Clamp fork, sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab,

Condition: used, functionality: fully functional, machine/vehicle number: RFB03A00934, Year of construction: 2018, operating hours: 170 h, load capacity: 2,000 kg, lifting height: 135 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 634 kg, drive type: Elektro, construction width: 720 mm, Low-lift pallet truck Chassis number: RFB03A00934 Load center: 600 Fork width: 165 mm Fork thickness: 55 mm Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Front tire condition: 80 - 100% Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Isdpfx Ajzhczkjd Ietl Battery year of manufacture: 2018 Battery condition: 80 - 100% Description: The unit has been refurbished both visually and technically. Maintenance, including hydraulic oil replacement, has been carried out. UVV inspection has been renewed.

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Itodpfxjx Dw Nue Ad Ijl

Condition: excellent (used), MITSUBISHI MR-S11-200-E31 Itjdpfxjy S Dvys Ad Iol SER. 0Y20009

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 5,526 h, fuel type: electric, power: 2.2 kW (2.99 HP), battery manufacturer: AIM, battery capacity: 465 Ah, battery voltage: 24 V, battery weight: 280 kg, fork carriage width: 670 mm, fork length: 1,150 mm, fork width: 165 mm, fork thickness: 50 mm, ground clearance: 30 mm, tire condition: 50 %, front tire type: polyurethane tires (non-marking), front tire size: Durchmesser 240 mm, rear tire type: polyurethane tires (non-marking), rear tire size: Durchmesser 80 mm, overall weight: 1,070 kg, empty load weight: 790 kg, total height: 1,750 mm, total length: 2,370 mm, total width: 820 mm, color: green, Equipment: pallet forks, Intended for use in an enclosed warehouse with a level floor under normal, dry temperature conditions. Regular occupational safety inspections and maintenance are required, BUT CURRENTLY NO OCCUPATIONAL SAFETY INSPECTION HAS BEEN PERFORMED!! We have another identical vehicle that is also for sale. Sale as a package is also possible. Isdpfjzh Hm Rjx Ad Ietl

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP Ijdpfxsx D Ryye Ad Iotl • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 283 h, load capacity: 2,000 kg, lifting height: 220 mm, free lift: 220 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 820 kg, drive type: Elektro, construction width: 740 mm, Reach truck Load center: 600 Fork width: 175 mm Fork thickness: 60 mm Itodszhczqspfx Ad Ijl Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Battery capacity: 345Ah Battery manufacturer: Marathon Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: The unit has been refurbished both visually and technically. Maintenance including hydraulic oil replacement has been performed. UVV inspection has been renewed. CE certificate.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total width: 2,710 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, product length (max.): 2,420 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi FA20 wire EDM machine was manufactured in 2004. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine can handle workpieces up to 1050 mm x 800 mm x 295 mm and has a maximum workpiece weight of 1500 kg. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA20 wire EDM machine we have for sale. Contact us for further details. Ijdpfx Adszhbyrs Ietl - Max. Workpiece Dimensions: 1050 mm x 800 mm x 295 mm- Max. Workpiece Weight: 1500 kg- Certification: CE Marked

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Iodsv Ip Sgepfx Ad Ijtl

Condition: used, mileage: 170,000 km, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tail-lift, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 4.358 kg Carrying capacity: 3.132 kg GVW: 7.490 kg Tail lift: 1000 kg = Additional options and accessories = - Airbag - Beifahrerbank - Front center armrest - Outside temperature display - Radio Isdpfxozzc Iwo Ad Ijtl - Roof spoiler - Suspension seat - Tachograph - Tined glass - Toolbox

Condition: used, mileage: 80,000 km, power: 110 kW (149.56 HP), first registration: 04/2022, fuel type: diesel, overall weight: 3,010 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Looking for a different model, engine, dimensions, or other features? Feel free to contact us. We offer financing and leasing at attractive rates - also for the Netherlands, Austria, and new businesses! ---- Interior: Automatic climate control * 4 speakers * Audio system with radio + CD * Driver Information System (FIS) with color display * Multifunction steering wheel Ijdpfxszn D Rmo Ad Ietl * Height-adjustable steering column * Rear armrest * Center console with storage compartment * Eyeglass compartment * Lockable & illuminated glove compartment * Electric windows front & rear * Auto-dimming interior mirror * Inside/outside temperature display * Cup holders front & rear * Reading light * Height-adjustable driver's seat * Carpet in the passenger compartment * USB/audio interface * 12V socket in center armrest / center console Safety & Assistance: Airbag driver & front passenger * Front passenger airbag can be deactivated * ISOFIX child seat mounting * Electronic stability & traction control * Front seat belt pretensioners * Height-adjustable seat belts * Side impact protection * Child safety lock * Start/Stop system (ASG) Wheels & Technology: Alloy wheels * Electrically adjustable exterior mirrors * Heated rear window * LED third brake light * Heat-insulating glazing * Remote unlocking of the fuel tank flap * Rev counter * Lashing eyes in the cargo area Exterior: Pick-up double cab * Side steps * Underrun protection front * Mud flaps front & rear * Bumpers in body color * Radiator grille in matte black * Exterior mirrors black * Door handles outside black * Roof antenna * Clear glass headlights * Wheelbase 3,000 mm * Engine 2.2 l DI-D diesel, 110 kW (150 hp) * Emissions standard Euro 6 * Trailer hitch 3.1t, 13-pin socket ---- Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual customization on request is possible. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale subject to change. Kind regards, Pimenta Automobile

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. Ijdpfxjzka Ruj Ad Iotl 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: good (used), Year of construction: 2006, Talleres Cato PA 200 Meat Grinder The Talleres Cato PA200 is a high-capacity industrial meat grinder manufactured by the Spanish company Talleres Cato S.A., which specializes in heavy machinery for the meat and food processing industry. Manufacturer: Talleres Cato Model: PA 200 Year: 2006 Power: 30 kW / 400 V / 50 Hz Capacity: Up to 4,000 kg/h Throat Diameter: 200 mm Itedpfx Aszz H H Rsd Iol Machine Dimensions (L x W x H): 1,600 x 1,700 x 1,750 mm Machine Weight: 1,000 kg.

Year of construction: 2014, condition: used, curb weight 2.500 kg Max. load weight 2.500 kg total wight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iodpozkbp Sefx Ad Iotl Technical features & accessories: - 1x Quick-Point mounting plate for the machine - 20x centering vises (77mm steel version) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Itjdox Dw Nhopfx Ad Isl

Condition: used, Year of construction: 2001, functionality: fully functional, table width: 750 mm, table length: 2,200 mm, overall weight: 10,800 kg, spindle motor power: 19,000 W, CNC SELCA S3045 P TABLE Table size: 2,200 x 750 mm T-slots: 6 x 18 x 130 mm Maximum permissible load with standard support system: 3,500 kg TRAVELS Itsdpfxozr U Tto Ad Ijl Longitudinal: 2,000 mm Transverse: 800 mm Vertical: 1,250 mm Spindle nose – table surface distance: 970 mm SPINDLE AC motor power: 25 HP (19 kW) Spindle taper: ISO 50 Constant torque speed: rpm 0 - 195 Constant power speed: rpm 195-4,000 Maximum torque: 930 Nm Universal head with ISO 50 taper and automatic rotation of both axes with positioning every 2.5°. FEEDS Working feeds: mm/min 0 – 4,000 Rapid traverse of Y/Z/X axes: mm/min 15,000 Working thrust of Y/Z/X axes: DaN 2,000 MOTORS AC motors for X/Y/Z axis feed: Nm 18, 18, 18 Coolant pump: 2 HP (1.5 kW) Hydraulic unit: 1.3 HP (1 kW) Guide lubrication: 0.3 HP (0.2 kW) Coolant oil pumps: 1.3 HP (1 kW) Refrigeration unit: 5.5 HP (4 kW) TOTAL MAXIMUM INSTALLED POWER: 55 HP (40 kW) APPROXIMATE WEIGHT: 10,800 kg YEAR OF MANUFACTURE: 2001

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Depth of Cut: 60mm Motor Power: 5.3HP Saw Blade Dia: 250mm Itjdpfx Ajyzf E Usd Iel Saw Blade Bore: 30mm 400V 50Hz

Condition: as good as new (ex-display), Year of construction: 2021, total length: 1,700 mm, total height: 2,000 mm, Automate palletizing with the HYDRA 20 cobot palletizer: 👉 20 kg payload 👉 Up to 2.2 m palletizing height 👉 12-month warranty Inspection: Demonstrations are available by appointment at the FJM showroom, 2486 Pottendorf, Baden district near Vienna. Condition: Demonstration machine (minor cosmetic wear) → Collaborative robot DOOSAN ROBOTICS Cobot H2017 → Robot base and controls Isdjy Iz Tnjpfx Ad Iotl → Pallet frame for 2 Euro pallets, including sensors → FJM suction gripper with aluminum plate and 6 suction cups → Vacuum generation with ejector via external compressed air → FJM palletizing software, including PC, mounting console & touchscreen A detailed description and price conditions for the cobot palletizer with a 20 kg payload can be found in the attached PDF! #palletizing #palletizingrobot #usedrobot #palletizingsystemforcardboardboxes #endtoendautomation HYDRA cobot palletizer by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH

Condition: used, mileage: 83,800 km, power: 110 kW (149.56 HP), first registration: 09/2013, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2027, color: silver, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 5,200 mm, loading space width: 2,440 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, Mitsubishi Fuso Canter 7C15 Eco Hybrid. Young plywood box body with tail lift. MBB Palfinger, 1,000 kg capacity. Dimensions: 5.20 x 2.44 x 2.38 m. Wheelbase approx. 3.85 m... Air conditioning, radio/CD/navigation system, spoiler, 3 seats, armrest, power mirrors, ABS, 2 airbags, 2 tie-down rails, engine brake. =German registration + 1 owner= =Daily purchase of commercial vehicles, as well as trade-ins possible= Detailed view of the vehicle // Detailed walkaround of the car: ?v=ac4-V6hux4Q Ijdpfx Adezttx Re Ijtl Price: 9,900 EUR net. Payload: 3,140 kg.

Condition: used, mileage: 201,920 km, power: 92 kW (125.09 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,200 mm, total height: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 2,150 mm, * Mitsubishi Canter Fuso 3C13 * Twin tires * VIN: TYBFB833BE4DU06124 * Engine type: 4M4.2A3-73-40 Itsdpjy Ng Umjfx Ad Iol * kW: 92 * Displacement: 2977 cc * Euro 5 * Unladen weight: 2790 kg * Payload: 635 kg * Gross weight: 3500 kg * Wheelbase: 3350 mm * Body internal length: 4.40 m * Body internal width: 2.15 m * Body internal height: 2.15 m * Vehicle length: 6300 mm * Vehicle width: 2200 mm * Vehicle height: 3200 mm * Tires: 195 / 75 R 16 C * Vehicle without VAT * All information provided without guarantee Tel./WhatsApp:

Condition: used, empty load weight: 6,680 kg, maximum load weight: 11,320 kg, overall weight: 18,000 kg, first registration: 09/2010, loading space length: 6,600 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, loading space volume: 39 m³, total length: 8,430 mm, suspension: air, color: red, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, * German vehicle * Condition, see photos * 2-axle Krone tandem trailer, type ZZ/R 18 * Body: Refrigerated box with Mitsubishi underfloor refrigeration unit, type TU42DX-EV4E * Cooling capacity from 0°C to -20°C * Standby and in-transit cooling via diesel and electric drive * Cargo space dimensions: Length 6,600 mm x Width 2,450 mm x Height 2,400 mm * Front roll-up door for drive-through loading * Load securing rails * Tail lift DAUTEL, type DL2000S * Load capacity 2,000 kg * DAF CF460 with Mitsubishi refrigeration unit TNW6, available at an extra charge * 3 support legs * BPW eco plus axles * Air suspension * ABS * GVWR 18,000 kg * Tare weight 6,680 kg * Payload 11,320 kg If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV (German Social Accident Insurance) inspection, new SP (safety inspection), or new UVV (accident prevention regulations) inspection. You can find more trucks on our website at: Itedpfx Ajzb Iz Red Iel We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false assumptions about the condition and suitability are made by the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without warranty. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: ready for operation (used), Mitsubishi AOSB-02-DWC + OSGA-02-DWC + ASVA-01-DWC + IAPA-01-G module with control boards for Mitsubishi SX10 wire EDM machine, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. Iodpfxjx Dw I Do Ad Iotl

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL SPECIFICATIONS Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel compliant with PED 2014/68/EU Category IV Module G – Single Unit Inspection Notified body: TÜV SÜD Notification number: 0036 FAT – Factory Acceptance Test Full factory FAT conducted and documented. Testing includes pressure test, NDT (non-destructive testing), dimensional inspection, surface roughness inspection, and documentation release. FEATURES • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Interior electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and instrument connections • Safety valve • CIP connections • Suitable for pressure and vacuum operation CONDITION Itjdpeykt T Rofx Ad Iol • Never used in production • TÜV Module G certified • As-new industrial condition • Immediately available DOCUMENTATION – complete and available Comprehensive structured documentation including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT documentation • Material certificates • Welding lists and WPS/WPQR • NDT reports • Surface roughness protocol • Surface treatment report • Internal pressure test • Dimensional protocol • Calibration certificate (pressure gauge) • Component drawings • Assembly parts list • Operation and maintenance manuals (equipment & components) • Qualification certificates • Analysis certificates for welding consumables and shielding gases Complete digital documentation file available. APPLICATIONS • Pharmaceutical industry • WFI / PW • GMP-compliant plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical version with PED Cat. IV Module G single unit inspection by TÜV SÜD, complete FAT, and full technical documentation. Immediately available.