Used Morbidelli M 600 F for sale (88,579)

Condition: new, GMN TSE 60 du X 315 - 6005 HF spindle / high-frequency spindle 1.8kW 6000rpm SN: R338157 with Georgii Kobold KOD 526 / XF / W / S215 / X motor 127 ID: 10 1357 0005 SN: 621774, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hnsdpey Nqamsfx Apnjl

Condition: ready for operation (used), Siemens 7ME4110-2CC10-1AA0 SITRANS F C MASS 6000 SN 010912N405, used, in good condition, 100% fully functional, delivery as shown in photos. Hedpfx Aey Nr Rtepnenl

Condition: ready for operation (used), Siemens 7ME4110-2CC10-1AA0 SITRANS F C MASS 6000 SN 190919N406, as new, 100% functional, delivery as per photos. Hnodpfjy Nr R Hox Apnsl

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134835N324, used, in good condition, 100% fully functional, delivery as shown in the pictures. Hnjdjy Ntbgopfx Apnjl

Condition: new, Rexroth MDD093C-F-030-N2L-110GA2 3-phase permanent magnet motor, MNR: R911258045 , SN:7162006000401 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Hodpfxji D Nhhe Apnjnl

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Hnjdpfxex R Uw So Apnol Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, all stainless steel mobile adjustable speed belt width 600 mm with air knife Hjdpfx Aey Eya Uepnonl dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former Hedpfx Apjwld Upsnonl 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Hjdowld Tfspfx Apnonl Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: AA2-002032, functionality: fully functional, operating hours: 9,974 h, overall weight: 7,450 kg, feed length X-axis: 5,020 mm, feed length Y-axis: 1,680 mm, feed length Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 5,020 mm Y-axis travel: 1,680 mm Z-axis travel: 250 mm Number of axes: 5 Software: SCM XILOG MAESTRO Control systems: SCM PRISMA K, SCM TTS System, SCM TecPad, MORBIDELLI TV Matic, SCM PRO-SPACE, SCM RAPID 12, SCM RAPID 24 Tool changer: 36 positions Drilling units: 24 x vertical MACHINE DETAILS Machine dimensions (LxWxH): 2,400 x 8,000 x 2,400 mm Total weight: 7,450 kg EQUIPMENT - Vacuum pump with 250 m³/h capacity - Liquid-cooled milling spindle Hodpfx Ajy Akgaopnonl

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 Hodjy Ez Efepfx Apnjnl number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 1,980 mm, conveying length: 1,980 mm, construction width: 685 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 60 kg, TAF item number: 1000005971 Manufacturer: TAF-Industriesysteme Hnedpsy R R I Hsfx Apnsl Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,980 x 685 x 150 Width including side rail in mm: 685 Side rail height in mm: 140 Conveyor length in mm: 1,980 Conveyor width in mm: 600 Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: not available Support roller axle type: M8 internal thread Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Drive: Kyowa Puls Roller Motor type: Puls Roller Motor data: / Conveyor speed in m/s: 35 ZMHT, 0.83 m/s Net weight in kg: 60 Condition: used / fully functional Functional test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 990 mm, conveying length: 990 mm, construction width: 685 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 30 kg, TAF item number: 1000005970 Manufacturer: TAF-Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 990 x 685 x 150 Width including side rail in mm: 685 Side rail height in mm: 140 Conveyor length in mm: 990 Conveyor width in mm: 600 Hedpfxey R D D Ie Apnjnl Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: not available Support roller shaft type: M8 internal thread Support roller diameter: 50 mm Support roller per axle: 1 Support roller material: Steel Drive: Kyowa Puls Roller Motor type: 24 V motor roller Conveyor speed in m/s: 0.83 m/s Net weight in kg: 30 Condition: used / fully functional Functional test: OK

Condition: new, functionality: fully functional, Features of the system: 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Technical parameters: 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) Hnodsk Dz Hwspfx Apnsl 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hedjxy Tmnepfx Apnjnl

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 Hodpsy D Nmnsfx Apnonl • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Hnodpfx Aoy I Ac Dopnel

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Hodpfx Ajy Efp Ujpnonl Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tool cleaning (air) Cooling unit for spindle and switch cabinets documentation

Condition: used, mileage: 568,811 km, power: 162 kW (220.26 HP), first registration: 11/2012, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Vehicle ID for customer enquiries: 4601 * Rear axle differential lock * Air conditioning * Automatic transmission * Environmental badge (green) * Air suspension * Electronic Stability Program (ESP) * EBS (Electronic Braking System) * Cruise control * Particulate filter Hedjyk Nttepfx Apnonl * Power windows * Anti-lock Braking System (ABS) * Two-seater * Air-operated engine brake * Power steering * Electrically adjustable side mirrors * Steel rims * Full service history * 2/3 doors No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors expressly reserved. The description serves identification purposes only and does not constitute warranty within the meaning of commercial law. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-PURCHASE OPTION deal Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device can be arranged locally by our partners * Export plates for 30 days All export documentation possible but must be requested individually * TOLL registration for Toll-Collect can be arranged on site * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: good (used), Year of construction: 2009, Offer 25291 Technical Data: - Lifting capacity with 6 suction plates: 600 kg - Suction plate dimensions: 400 x 250 mm - Vacuum motor power (battery-operated): 0.85 kW - Battery charger connection: 230 V - Distance from crane eye to suction plates in horizontal position: 950 mm - Required space (W x D): 1400 x 750 mm Hjdpfx Apey Ibn Eonenl - Own weight approx.: 180 kg

Condition: good (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder: DIN 69871 ISO 40 Travel paths: X-axis: 1615 mm, Y-axis: 815 mm, Z-axis: 725 mm Table load capacity: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Space requirements (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special Features: • CNC path control FAGOR • ICS coolant through spindle, 20 bar • 24-position tool changer • Hinged belt chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Hjdpfxjyy Npnj Apnjnl

Condition: used, mileage: 170,344 km, power: 132 kW (179.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,070 mm, loading space width: 2,250 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, driver airbag, automatic transmission, tachometer, power steering, electric windows, cruise control, on-board computer, electric exterior mirrors, driver's suspension seat, central locking with remote control, Euro 6, air conditioning, rear wing doors, right-side sliding door, Carrier Xarios 600 refrigeration unit, standby and in-transit cooling, power connection, temperature printer, adjustable partition wall (thermal partition), wheelbase: 4,100 mm, etc. Subject to errors, prior sale, and typographical mistakes. Hedpoy Iiqusfx Apnjnl Sale to trade professionals and for export only. !!!! Fg-9500 !!!! Key number: 42 !!!!! !!!!! Test/inspection drives to TÜV, Dekra or Iveco are possible !!!!! NEW TÜV POSSIBLE ON REQUEST !!!!! All documents can be sent in advance by email or WhatsApp to verify mileage, accident history, vehicle history, etc. !!!!! WhatsApp !!!!!

Condition: used, mileage: 158,022 km, power: 132 kW (179.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,070 mm, loading space width: 2,250 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, driver airbag, automatic transmission, tachometer, power steering, electric windows, cruise control, onboard computer, electric exterior mirrors, driver's suspension seat, central locking with remote control, Euro 6, air conditioning, rear wing doors, side door/right, Carrier Xarios 600 refrigeration unit, refrigeration for both stationary and driving, power connection, temperature printer, adjustable partition wall (thermal partition wall), wheelbase: 4,100 mm, etc. Subject to errors, prior sale, and typographical mistakes. Hnodpfxey Iiqbo Apnjl Sale only to businesses and for export. !!! Fg-9499 !!! Key number 57 !!! Test drives/inspection possible at TÜV, Dekra or Iveco!!! ON REQUEST WITH NEW TÜV!!! All documents can be sent in advance via email or WhatsApp to check mileage, accident history, vehicle history, etc.!!! WhatsApp!!!

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Hedpfoy Dta Sex Apnenl

Condition: used, Year of construction: 1999, x-travel 600 mm Hjdpfxjfff Rfj Apnjnl y-travel 450 mm z-travel 300 mm CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system