Used Ms- Maschinenbau Strong Mehrblattsaege With Automatic B for sale (55,245)

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen Lodpfjgvu Alex Alnoaa - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm Lajdofvbphepfx Alnsa - min log length 2.000 mm - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Year of construction: 2024, condition: new, max. cutting length 3.000-8.000 mm min. cutting length 500 mm max. cutting height 80 - 140 mm stepless feed 10-30 m/min. Ljdpfxoxfzlo Alnsaa saw motor power 4,0 - 7,5 kW feed motor 1.5 kW number of saw supports 2 - 6 weight 1.000 - 2.500 kg

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Ljdpfey Emnxsx Alnjaa

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Lasdpfxoy Eizzs Alnea Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 with Corrugated Option, fully automatic Resolution: 10 pl - 1000 dpi Color: 6C + (optional White) Very low usage Speed up to 2025 m2/h Laodpfx Aloy Amckjnja Fully automatic loader (feeder) Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 rails for dropping down material Corrugated static bar for different material thicknesses Corrugated software to control media and thickness - Understatic bar and automatic media stop for crash prevention - Caldera Rip Software Demo video is from Durst Rho 750 (28 pl, 600 dpi)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Ljdeytkiuepfx Alnoaa Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Lodjynpc Nepfx Alnsaa Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: used, axle configuration: 3 axles, first registration: 03/2008, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,960 mm, Year of construction: 2008, Equipment: ABS, = Other options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: drum brakes Suspension: air suspension Laodpfxsx Tt Hkj Alnsa Rear axle 1: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 2: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 3: Tyre tread left: 25%; Tyre tread right: 25% Weights Unladen weight: 7,100 kg Payload: 33,900 kg Gross vehicle weight (GVW): 41,000 kg Functional Loading platform height: 120 cm Condition Damages: none Identification Registration number: OK-44-HL

Condition: excellent (used), mileage: 562,500 km, first registration: 12/2000, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 620 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, Year of construction: 2000, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Equipment = - 2 sleeping bunks - 600-liter diesel tank - Aluminum fuel tank - Heated exterior mirrors - Driver comfort seat - Differential lock - High beam headlights - Speed limiter - Hydraulic system - Intarder - Air horns on cab roof - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - ZF16 manual transmission - Tow hitch = Remarks = HEAVY DUTY, GOOD CONDITION DAF FAS95-480XF SPACECAB (EURO 3) 6x2 STEEL/AIR SUSPENSION CHASSIS WITH ZF16 MANUAL GEARBOX, ZF-INTARDER & AIR CONDITIONING!! 480HP, EURO 3, 6-CYLINDER ENGINE!! ZF16 MANUAL TRANSMISSION!! ZF-INTARDER!! STEEL SUSPENSION FRONT AXLE!! LIFT AXLE!! P.T.O.!! AIR CONDITIONING!! ETC.!! HUFFERMANN HL26/63 20,000 KG HOOKLIFT SYSTEM (6.00 METERS LONG)!! TRUCK IS IN GOOD WORKING & DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE DAF 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Transmission: ZF16 MANUAL GEARBOX + ZF-INTARDER, 16 gears, manual Axle Configuration Lodpfx Asuy I Afolneaa Brakes: Drum brakes Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Steering axle; Left tire tread: 30%; Right tire tread: 30%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Inner left tire tread: 50%; Outer left: 50%; Inner right: 50%; Outer right: 50%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Lift axle; Max. axle load: 7,100 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: Air suspension Weights Unladen weight: 11,950 kg Payload: 14,040 kg Gross vehicle weight: 26,000 kg Functional Body maker: HUFFERMANN HL26-62 20,000 KG HOOKLIFT SYSTEM Condition Technical condition: Very good Visual condition: Very good Further Information Contact Sales Department or Erik Engel for more information.

Condition: used, axle configuration: 3 axles, first registration: 03/2008, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,960 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Lasdeyibrpopfx Alnja Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 2: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 3: Tyre tread left: 25%; Tyre tread right: 25% Weights Unladen weight: 7,100 kg Payload: 33,900 kg Gross vehicle weight (GVW): 41,000 kg Functional Loading platform height: 120 cm Condition Damages: none Identification Registration number: OK-13-HY

Condition: used, axle configuration: 3 axles, first registration: 03/2008, total length: 13,860 mm, total width: 2,550 mm, wheelbase: 8,960 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Unladen weight: 7,100 kg Payload: 33,900 kg GVW: 41,000 kg Loading platform height: 120 cm Damage: none Ledpfx Aleycqn Nonoaa License plate: OK-20-HY

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW Lasdpfx Aekwhapelnsa pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm Lodpfswka S Iox Alnoaa - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Lajdpjw I U Drefx Alnea Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: as good as new (ex-display), Year of construction: 2024, different lengths on request - length 3000 mm with 3 supporting feet - roller conveyor with scale, manual measuring system with adjustable and hinged length stop incl. reading magnifier - Roller and measuring track for lighter plastic, aluminium and steel profiles - max. measuring length is track length minus 250 mm - carrying rollers, roller diameter 50x1,5mm, galvanized steel tube - axle diameter 8mm - track width 390 mm, usable roller width 300mm - Load capacity per metre of roller conveyor approx. 100 kg/m - roller pitch approx. 290 mm - track height adjustable from 770-1070 mm Lasdsgrn U Sspfx Alnsa - all parts are painted, colour silver grey RAL 7042, feet anthracite grey RAL 7016

Condition: used, maximum load weight: 29,490 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2016, next inspection (TÜV): 10/2018, Sliding tarpaulin, ABS, disc brakes, lift axle, color blue Lodpfx Aeyh S Rajlnsaa

Condition: used, machine/vehicle number: XLEP4X20005288941, mileage: 794,425 km, power: 168 kW (228.42 HP), first registration: 04/2012, fuel type: diesel, tire size: 385/65, tire condition: 50 %, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro5, number of seats: 3, total length: 9,940 mm, total width: 2,600 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,550 mm, loading space width: 2,410 mm, loading space height: 2,430 mm, Year of construction: 2012, Equipment: air conditioning, electric window regulation, power mirror, tail-lift, = Additional options and accessories = - Radio - Radio CD player = More information = Technical information Number of cylinders: 5 Engine capacity: 9.290 cc Axle configuration Tyre profile: 50% Front axle: Tyre size: 385/65; Max. axle load: 7100 kg Max. rear axle load: 11500 kg Lodpfx Aoycvraslnsaa Weights Empty weight: 10.980 kg Carrying capacity: 7.620 kg GVW: 18.600 kg Max. towing weight: 18.600 kg Functional Tail lift: tail lift Cooling engine: diesel (14609 operating hours) Identification Registration number: BZ-VL-32

Condition: ready for operation (used), * Idlers: with rolls * For Belt: 1000 mm * Rolls with size: 220 mm x 650 mm x 220 mm * ∅: 89 mm Laedpfx Alsywl Twjnsa * Price: €30 a Piece * On stock: 560 pieces.

Condition: ready for operation (used), Siemens 6FX1190-3AA00 MS 250 Module E Stand B used 100% functional Ledpoxagrkofx Alneaa

Condition: new, Rexroth MNR: R911260842 Type: MAC063C-0-MS-3-C/095-B-0/S007 Motor, serial number: MAC063-38185, unused, with storage marks, 100% functional, scope of delivery as per photos. Lodpex Ducrofx Alnoaa

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Lodpfx Alsi D D Efjnjaa Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts Ljdpfswb Hxvex Alnjaa - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 Lajdpouhatpjfx Alnoa - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle Laodpouhatcjfx Alnsa - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer