Used Ms-Maschinenbau Sts for sale (4,134)

Condition: new, Year of construction: 2022, functionality: fully functional, total height: 3,680 mm, operating pressure: 6 bar, final pressure: -0.6 bar, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, lifting speed: 166 mm/s, 2x Hova column-mounted slewing jib crane  2220847.03 Hedpfot I S Slex Adzjn  max. load 50kg  Outreach 4m  Individual aluminum jib lengths (depending on load capacity)  Smooth-running trolleys with guide and counter-pressure rollers  Individual load capacities  Swivel range up to 270° also adjustable  Standard with HOVA chain hoist and vacuum lifter  Special solutions through in-house production  Surface-mounted aluminum column swivels  Suspended aluminum column swivels  Telescopic swivel arms  Articulated arm swivels  Mobile version for transportation by forklift or crane 2x HOVAMAT vacuum suction cups HV 50kg/90°  2220847.01  Horizontal and vertical transportation of panels of all materials  Individual load capacities with overload protection  Infinitely variable lifting speed 0-10 m/min  Operating voltage 1x230V/50Hz  Operating pressure min. 6-7 bar filtered compressed air  HOVA special handling handle for 1-hand operation with all commands for the lifting unit and vacuum lifter  Low dead weight due to compact design  Suction plate arrangement with longitudinal and cross beam depending on requirements  Can also be picked up using magnets, mechanical or pneumatic grippers  Additional safety with HOVAMAT + and permanent weight monitoring using scales. Lowering cut-off for sleeping chain, load can only be released when set down, display for weight indication possible.  Optional: energy-saving unit 2x vacuum suction cups: €6,000 each 2x column swivel: €6,500 each The sale takes place under exclusion of any warranty.

Condition: excellent (used), Compressor SCHNEIDER UNM STS 660-10-270 XDK – used – Tank with powder coating, including refrigerant dryer ----- Technical data ----- Tank capacity: 270 litres, Number of cylinders: 1, Maximum flow rate: 660 litres, Effective delivery: 520 litres, Maximum pressure: 10 bar, Motor: 4 kW, Speed: 2,895 rpm, Dimensions (LxWxH): 900x800x1850 mm Quality information: - thorough basic cleaning performed - electrics tested Hodpsyyzrbjfx Adzjn - immediately ready for operation

Year of construction: 2015, condition: used, UniMaster STS 660-10-270 - Year of manufacture: 2015 - Including oil-water separator OWS-Öwasep 1 - Including condensate drain Ecomat 3100 With soundproof enclosure, extremely quiet operation Equipped with refrigerated dryer and bypass line Hedpfxeyzc R Uo Adzen V-belt driven, two-stage, 2-cylinder piston compressor Fitted with rubber vibration isolation mounts for secure placement With intercooler and aftercooler Easily accessible condensate drain valve Additional ports with blanking plugs for easy system expansion (except for the 90 l receiver) Air outlet 3/4" Space-saving vertical design Flexible upgrade options: retrofit soundproof enclosure (for compressors with 4 kW) and/or refrigerated dryer as required Easy and cost-effective vessel inspection through handhole opening Technical Data: Max. pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 520 l/min Drive power: 4 kW Speed: 1025 rpm Tank capacity: 270 l Weight: 170 kg Noise level: 78 dB[A] Air outlet: 3/4" internal Dimensions (W x D x H): 750 x 705 x 1800 mm Availability: short-term Location: Flörsheim

Condition: used, maximum load weight: 334 kg, overall weight: 1,000 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,530 mm, loading space width: 1,300 mm, loading space height: 80 mm, total width: 1,995 mm, total height: 400 mm, A35 GW26GA00006 Hodpfx Ajyn Ugajdzsn Lowerable Trailer Manufacturer: STEMA, Model WOM STS XT .1 Gross weight: 1,000 kg, Low-bed trailer, hydraulically lowerable, with overrun brake * Pivot axle with new kinematics * Support wheel * Hydraulic hand pump * Extremely stable welded frame with integrated railing * Additional central lashing rail * Waterproof phenolic plywood floor * Modern Multipoint III lighting with reversing and fog lamps * Optimal road holding thanks to stable, hot-dip galvanized chassis with STEMA safety V-drawbar * 2 wheel chocks * 2 mud flaps * Patented foldable license plate holder * Vehicle not refurbished...and much more. Errors and prior sale reserved.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 750x705x1800 mm Weight 170 kg Hsdpfxov A Hv Ss Adzsn Total power requirement 4 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 945x705x1800 mm Weight 206 kg Hedov A Hwcspfx Adzen Total power requirement 4 kw

Year of construction: 2023, condition: used, New demonstration unit! List price €2,986 net! Technical data: Pressure: 10 bar, Suction capacity: 650 l/min, Effective delivery rate: 520 l/min, Drive power: 4.0 kW, Speed: 1025 rpm, Tank capacity: 2 x 90 L, Weight: 175 kg, Noise level: 83 dB(A), Air outlet: 1/2" internal, Dimensions (W x D x H): 1200 x 800 x 1240 mm. Design: Belt-driven piston compressor mounted on two horizontal pressure vessels, fully assembled on a safety pan, including complete equipment. The ready-to-connect unit includes: - Pressure switch for fully automatic operation - Start-up relief and motor protection - Safety valve - Non-return valve - Pressure gauge. The belt-driven compressor unit allows all components to be clearly arranged, and components subject to maintenance can be easily removed or installed. Location: Rieth. Hedpfxsvxxvie Adzjn

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 14200229, Equipment: documentation/manual, The labeller is equipped with a Domino V 220i thermal transfer printer. Both are in like-new condition. Hjdpfxjygv Hxe Adzjn

Condition: used, Frei AG Laquer Curing Tunnel Please note the items in this lot 30466-430 are simultaneously offered in the combination lot 30466-425 as a complete line. The separte parts of the complete line 30466-425 are offered as individual lots 30466-426 to 30466-433 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. Hodpfey Ux Rqex Adzsn It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: new, cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Hsdpfxsy T R Sqo Adzjn Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Hjdpsu Ibuwsfx Adzon Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm Hjdsu Nfttspfx Adzsn ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, Technical details: Hsdju Nfrcjpfx Adzjn shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. *

Condition: used, functionality: fully functional, Complete valve grinding set for professional engine repair – packaged in three robust transport cases. Includes the actual valve grinding machine, a comprehensive set of valve seat cutters/reamers in various diameters, as well as collets and accessories (see photo – case opened). Ideal for engine repair shops, automotive specialists, boat engine/stationary engine service, classic car restoration, railway workshops, and industrial repair. The complete set is difficult to obtain individually and is therefore highly sought after. According to the equipment list (inventory no. 200004), the manufacturer is EFCO Maschinenbau GmbH, type Valval – please verify this on the nameplate on site. Test run/inspection possible at any time by appointment. Scope of delivery (3 transport cases): 1. Valve grinding machine (actual grinding unit) 2. Valve seat tools/cutter set 3. Collets, reamers, and accessories Hsdpezachvjfx Adzon Technical data: - Power supply: 230 V (check on site) - Application: Valve grinding, valve seat machining, valve guide machining - Completeness: apparently complete according to the photo, please check against the original list on site Collection/transport: Self-collection by car/van (3 cases, each approx. 20-30 kg). Shipping via a freight forwarder is possible.

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake Hjdpfjtufbnox Adzon used Make: BBM Model: AP ME 160-40 year of construction 1993 Pressure capacity 160 to. folding length 4050 mm Table width 190 mm Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Rear and side guards 3 front support arms Double foot switch Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 20131018, working width: 1,640 mm, compressed air connection: 6 bar, total width: 2,600 mm, total length: 12,500 mm, total height: 2,250 mm, overall weight: 7,100 kg, Fasson gluing machine with a working width from 150 mm up to a maximum of 1,640 mm. It can process corrugated or honeycomb board up to 20 mm thickness and cardboard from 350 g/m². Plate thickness: 8 mm, material: sponge/rubber foam. Power requirement: approx. 15 kW. Hodpey R Emkofx Adzen

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. Hsdpfx Adjywtxbozon It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Hjdpfxsgu Nmhs Adzon Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine Hjdpeg Dvdcofx Adzjn

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hjdpfjtr U Hlsx Adzjn Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: Hsdpfottah Rjx Adzsn → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network Hjdpfsx Ebzqex Adzon - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim Hsdpfowka S Iex Adzjn

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-maintained HIT arc conveyor / board or panel separator, robust design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with slat carriers, 6x2, 2 pairs. Integrated edge roller conveyor. Transfer cross conveyor, can be raised and lowered. Slab flap. Drive with SEW geared motor with brake. Arc conveyor bolted in the middle for transport. Hodpfx Adjxl Ediezon Disassembled and ready to be loaded onto a truck. Ideal for use before a double edger or stacking system.

Condition: new, For sale: high-quality stainless steel compensators / flexible hoses from a reputable manufacturer. Components designed for industrial installations – ideal for compensating vibrations, thermal expansions, and misalignments in piping systems. Hsdpfxsyzihas Adzon ⚙️ Technical data Model: BOA-MS Material: Stainless steel 1.4404 (AISI 316L) Nominal diameter: DN65 Operating pressure: PN16 Type: compensating hose / steel compensator Length: approx. 1000 mm Connections: flanged Construction: steel braided Year of manufacture: 2021-2023 Condition: New / unused (may show signs of storage) ✅ Applications industrial installations water and heating systems steam installations chemical and food industries vibration reduction for pumps and equipment