Used Ott Edge Cutter for sale (7,521)

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Pgedpfx Adjy Aplzolsk Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: refurbished (used), Year of construction: 2010, functionality: limited functionality, Alpina Swopper 330 litre Bowl Cutter Year 2010 Motor power 141 Kw Multispeed knife and bowl Noise cover Power up knife lid Podpfx Adjykt Sgjlsgk 6 x knives Unloader disc Tote bin loader Currently being refurbished New knife shaft bearings fitted Hydraulic rams being checked and new seals fitted Main motor being rewired, machine stripped out to clean. 6 x knife speeds with 2 x reverse knife speeds 4 x bowl speeds With machine manual and drawings

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm Psdpoyyyftefx Adlogk 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg Pedpeyh H Aqofx Adlegk – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Podpogmn H Aefx Adlsgk

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Podpfx Adjyutxnjlogk Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Pjdpey Egkgjfx Adlogk Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Podpfov Sm Hcsx Adlsgk Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately -

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, Ott JU 2511 Hydraulic veneer press with electric heating plates Gold eloxal electric heating plates Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety tear-off cord Rack compensation CE compliant Pressing area: 2500 x 1100 mm Number of press cylinders: 4 Total pressing force: 70 t Lift height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total power consumption: approx. 16.1 kW Dismantlable design Space requirement (L x W x H) approx.: 2960 x 1250 x 1955 mm Weight: approx. 2900 kg Year of manufacture: 1998 Pedpfx Adsy Hbw Rslegk Price: €6,500 • Technical data subject to change and prior sale reserved. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar Pgsdpfxoyn I U Rs Adlek • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: used, maximum load weight: 12,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 09/2025, loading space length: 7,400 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, loading space volume: 41 m³, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, tail-lift, * Tail lift - Palfinger MBB 2000kg * Air suspension Safety: ABS Pgodpfxjyvw S Ns Adlok * EBS * Disc brakes * 4x Jost crank supports * Spare wheel holder * Wabco braking system * Tyres: 385/65R22.5 * Lashing rail * Interior lighting

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Pgedpfx Adsych Igslsk Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Psdpfxex D E Avo Adlegk Application Types Pressing / Laminating

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Pedpfx Ajwdic Aedlegk Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: excellent (used), Year of construction: 1991, Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch Main switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety pull cord Rack compensation CE conformity Pressing area: 2,500 x 1,300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirement (L x W x H) approx.: 2,900 x 1,250 x 1,900 mm Weight: approx. 3,800 kg Request more information NEW MYLAR FILM on both heating plates NEW hydraulic cylinder seals Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex works – free loaded! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. Pgedpfxsyyn Rdo Adljk (Your inquiries will only be answered with your address and telephone number!)

Condition: refurbished (used), functionality: fully functional, edge thickness (max.): 15 mm, overall weight: 4,000 kg, OTT edge banding machine type Strom+ Optional with return system TransCompakt or TransLift. The machine is factory reconditioned and is sold with warranty in Germany. New tools, new chain plates and belts. For PUR glue and EVA glue. Alternatively, we also have access to a Tornado+ and StrongEdge, both factory reconditioned. Pgsdpfx Adsyn Am Ielsk

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale is a BOXMAKER® carton production machine by Horstmann Maschinenbau, designed for the flexible manufacturing of custom shipping cartons—precisely in the required size and quantity. Your advantages at a glance: • Produce cartons "just in time"—individually controlled via touch panel • Reduction of storage costs and packing materials • Lower shipping costs thanks to perfectly fitting packaging • Fewer transport damages, increased customer satisfaction Podpoylw Nljfx Adljgk • Processes continuous corrugated board or sheet stock; complex cuts are possible Ideal for industry, wholesale, fulfillment, and e-commerce operations looking to optimize packaging processes for greater efficiency, sustainability, and independence.

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Pedpfxoyw Rknj Adlsgk Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: used, OTT Tornado FÜ + PU PLC control unit with 7" TFT color touch display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit - jointing Fully automatic roller magazine Fully automatic edge band magazine Pneumatic flush trimming 0-3° Flush milling - 12mm Radius milling R-2, R-5 Chamfer milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof enclosure with central extraction Cleaning set with 4-way spray system, high-precision buffing unit, and glide agent spraying system First delivered in 2006 Machine is WORKSHOP TESTED and in TOP CONDITION Podpfx Asywuvnsdlogk Available ex stock Lieboch

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Pgodpfx Aoywiyzsdlek

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Pgsdpowz Ufwefx Adljk Type: Two chucks

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated Pgodpfxov D Uhfj Adljk ≤2m workpieces are unloaded through servo flaps

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing Podpowvpcmefx Adlogk 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Podpfx Adex Enp Rjlsgk Plate size: 2200 x 1100 mm Equipped with Busse aluminum energy-saving plates (The spots visible in the photos are purely optical; the plates are in perfect condition) Total pressing force: 80 t Press cylinders: 4 x 90 mm Opening stroke: 400 mm Weight approx. 3,100 kg Overall length: 2,610 mm Overall width: 1,240 mm Overall height: 1,890 mm Motor power connection: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Weight approx. 3.1 t Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Pgjdpfxjhy Tlre Adlsk Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)