Used Pannkoke 7001-Ab for sale (11,749)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced Kedpsu Thhrsfx Am Eolr All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Siemens 1FT6134-6AB71-2AL4 synchronous servomotor, SN: YFNN13467001001, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for the costs of packaging and shipping! Kljdpsx Duxasfx Am Eor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Manufactured by Electro Heat Sweden AB. Kjdpfsulu Nujx Am Eelr

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. Kedpfsduub Usx Am Ejlr - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: used, For lye pastries, flammkuchen, pizza – without steam injection. We have 2 more for sale in the same version. From our own operation – used until recently, ready for immediate use, pick-up only – test run possible. Kedpfx Aoyg N D Dsm Eolr

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 496 h, load capacity: 750 kg, lifting height: 14,300 mm, lifting power: 750 kg/m, platform length: 4,500 mm, platform width: 2,360 mm, overall weight: 9,000 kg, transport length: 4,840 mm, transport width: 2,460 mm, transport height: 2,370 mm, fuel type: electric, tire condition: 85 %, wheelbase: 3,200 mm, color: blue, Equipment: UVV, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 496 h Machine width: 2.46 m Drive system: 2WD (two-wheel drive) Driveable at full height: Yes Extendable platform: Yes (up to 2.70 m) Power output: Electric drive, 80 V / 540 Ah Working height: 16.30 m Platform capacity: 750 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: No Platform dimensions (L × W): 4.50 × 2.36 m Tyre type: Non-marking CE certification: Yes Weight: approx. 9,000 kg Klodpsx Nhvrsfx Am Ejr Indoor / Outdoor use: Both (Indoor & Outdoor) === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Battery tested and in good working condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable electric scissor lift with high platform capacity and compact design. Ideal for indoor and outdoor applications where low emissions and quiet operation are required. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional technical assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales.

Condition: good (used), functionality: fully functional, Year of construction: 2020, load capacity: 600 kg, lifting height: 30,000 mm, lifting power: 600 kg/m, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, construction height: 3,190 mm, fuel type: electric, tire condition: 80 %, wheelbase: 4,870 mm, ground clearance: 200 mm, color: blue, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2020 Operating hours: On request Machine width: 1.39 m Drive system: 4x4 (4WD) with 4-wheel steering (4WS) Driveable at full height: Yes Extendable platform: Yes (1.90 m extension) Power output: Electric drive, 80 V / 560 Ah Working height: 32.00 m Platform capacity: 600 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: Yes Platform dimensions (L × W): 5.80 × 1.20 m Tyre type: Non-marking (solid) CE certification: Yes Weight: 21,500 kg Klsdpfx Amjx Nft Ie Esr Indoor / Outdoor use: Indoor & Outdoor === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Batteries tested and in good working condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from trusted sources, supported by professional technical expertise. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales logistics team.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 472 h, power: 60 kW (81.58 HP), load capacity: 750 kg, lifting height: 26,000 mm, lifting power: 750 kg/m, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 19,800 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: electric, wheelbase: 4,100 mm, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 472 h Machine width: 2.50 m Drive system: 4x4 Driveable at full height: Yes Extendable platform: Yes (2.13 m) Power output: Electric drive, 80 V / 750 Ah Working height: 28.00 m Platform capacity: 750 kg Drive type: Electric – Hydraulic Battery type: Lead-acid Self-levelling outriggers: Yes Platform dimensions (L x W): 5.48 × 2.44 m Kodpfx Amox Ivqno Eslr Tyre type: Non-marking CE certified: Yes Weight: 19,800 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Selected from a professional fleet with verifiable technical data CE-certified machine Driveable at full working height High platform capacity suitable for heavy-duty applications === CONDITION === Machine is in original operational condition. Electric drive system fully functional. Battery system present (80 V / 750 Ah). Available directly from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide transport available. Price on request (EXW / excl. VAT). Reliable heavy-duty electric scissor lift designed for demanding indoor and outdoor applications. High load capacity, full-height drivability and extendable platform ensure maximum productivity. Machine is CE-certified and ready for immediate deployment. === DELIVERY === Crane loading available on request. Flexible transport solutions available depending on destination. Logistics handled by Collé Rental & Sales.

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description Klsdpfxod Arwho Am Eer - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Advantages - Makes notching/cutting effective and precise - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Klodpfx Asvgrh Uom Esr Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, Klsdpjv T I Evofx Am Eor We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,934 h, load capacity: 750 kg, lifting height: 20,500 mm, lifting power: 750 kg/m, platform length: 4,300 mm, platform width: 2,400 mm, overall weight: 11,000 kg, transport length: 4,600 mm, transport width: 2,450 mm, transport height: 2,970 mm, fuel type: diesel, tire condition: 75 %, wheelbase: 3,140 mm, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 6,934 h Machine width: approx. 2.45 m Drive: 4x4 Driveable at full height: Yes Extendable platform: Yes Engine power: Diesel (manufacturer on request) Working height: 22.5 m Platform capacity: 750 kg Drive type: Diesel Battery type: N/A (diesel powered) Self-levelling outriggers: Yes (WDS system) Platform dimensions (L × W): 4.30 × 2.40 m Tyre type: Rough terrain (non-marking: no) CE certified: Yes Weight: approx. 11,000 kg Indoor / outdoor use: Outdoor === HIGHLIGHTS === Carefully selected machine with verifiable history CE-certified and compliant with European safety standards Equipped with self-levelling hydraulic outriggers (WDS) High platform capacity for heavy-duty applications Ready for immediate transport and operation === CONDITION === Machine in original working condition. Diesel engine and hydraulic system operate correctly. Tyres in good condition (approx. 75% tread remaining). Available directly from stock. Kljdex Ihicspfx Am Esr === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery possible Price on request (EXW / excl. VAT) Reliable AB Lift S225-24 D4 WDS diesel scissor lift for demanding outdoor applications. Thanks to its 4x4 drive, self-levelling outriggers and high platform capacity, this machine is ideally suited for construction, industrial and infrastructure work. All machines from Collé Rental & Sales are professionally inspected and ready for immediate use. Spare parts, service and technical support available on request. === DELIVERY OPTIONS === Crane loading available on request Flexible transport solutions tailored to destination and logistics Transport professionally arranged by the Collé Rental & Sales logistics team

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2003-2928/29, input voltage: 400 V, type of input current: three-phase, Pannkoke laminated glass cutting table with a maximum glass cutting width of 3.24 m and a maximum thickness of 12 mm laminated glass. Includes EUROMEC semi-automatic float cutting table (year 2003) as a loading table. Both machines are in very good condition. Kedpfx Amsx I Rb Ie Eolr

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: Kodpfx Ao Nn Hyjm Eelr • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, Randek intersection saw SPL728 Kedpfx Amefg Tatj Ejlr Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Klsdpjx Tdtnjfx Am Esr Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: ready for operation (used), Year of construction: 1981, machine/vehicle number: S 659, functionality: fully functional, fully functional in good condition Kodpfx Ameyr E Sho Ejlr

Year of construction: 1992, condition: good (used), Max. Ladegewicht: ca. 5 t Kjdou Ava Dopfx Am Ejlr Breite: ca. 4000 mm, Höhe: ca. 3800 mm, Tiefe: ca. 600 mm, Transport Maße: Breite: ca. 2000 mm, Länge: ca. 3800 mm, Höhe: ca. 1200 mm, Gewicht Netto: 450 kg.

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Kjdpsuprqwefx Am Eelr Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: good (used), Auflage Breite: beisitig 310 mm, Länge: 6050 mm, Höhe: 3110 mm, Klsdpfxjtluw Nj Am Eer Tiefe: 1220 mm.

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Hydraulic log kickers Klodpfx Aor Hbcfsm Esr

Condition: good (used), Year of construction: 2001, Lifting capacity: vertical 400/550 kg, horizontal 400/550 kg. Includes 4 additional suction cups for lateral extension, if required. External dimensions: Width: 2200 mm. Height: 1800 mm. Kljdpfx Asxyqiyjm Esr Depth: 1150 mm. Weight: 224 kg. Condition: good, second-hand

Condition: good (used), Glass loading fork for split dimensions tapes, max. glass width: 2550 mm, min. glass width: 1200 mm, max. glass length: 3210 mm, Minimum glass length: 2200 mm. Dimensions of the goods: Depth: 600mm, Width: 2100mm, Height: 3100mm, Weight: 220kg. Kedpfx Ajlz N Eyjm Eelr

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Kodpsxqf Rmefx Am Eelr

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be Klsdpst Irffofx Am Esr used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement