Used R25 Clamp Head for sale (17,962)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Fgjdpfxozxzags Aggjg Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 2019, machine/vehicle number: 28, functionality: fully functional, operating hours: 3,964 h, input voltage: 380 V, type of input current: three-phase, number of slots in tool magazine: 21, total height: 2,500 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 3,600 mm, table width: 800 mm, Machine offered on behalf of a customer – request the brochure with images & videos and the seller’s contact information. THIBAUT Edge processing center T658, manufactured in 2019, #029 • Toothed / drive belt new, to be replaced in 08/2026 • Grinding, polishing, and satin finishing of: - Straight edges up to 40 cm high - Profiled edges - Curved edges with rollers • Automatic tool changer with ISO 40 mount and pneumatic clamping force • Tool magazine with 21 slots • Operation via touchscreen • Automatic detection of workpiece position and thickness for a maximum of 5 workpieces • Table dimensions 3.60 x 0.80 m with consoles for rotary and lifting table for aligning the workpieces, table with new rubber coating • 4 rows of all-round rollers, height-adjustable • 6 pneumatic cylinders for clamping the workpieces • 4 clamping holders for locking the workpieces • Space requirement approx. 8.0 x 4.0 x 2.5 m • Tools / accessories - 5 planetary grinding heads AR3 with ISO 40 - 8 ISO 40 mounts for rollers 200 mm - 16 ISO 40 mounts for grinding media 100 & 130 mm - 1 ISO 40 mount with disc 300 mm Pricing: • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments, accessories shown in the pictures are not included in the machine/scope of supply. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty: • Machine as is, excluding any warranty claims Inspection possibility: • At the operating site near Kaiserslautern Availability: • Short-term / immediately after consultation Fedjzu Tltepfx Aggjgg

Condition: good (used), Year of construction: 2023, functionality: fully functional, Brother W-1000 XD1, Year of manufacture 2023 / Commissioned 2024, CNC control system, X/Y travel 1000/500 mm, Z travel 480 mm + column extension of 150 mm, 4-axis NC swivel head Brother T 200 with counter bearing, Spindle speed up to 16,000 rpm, BBT 30 tool holder, High-speed tool changer, 21 positions, Internal coolant pressure 15 bar, Side loading by robot, Twin chip disposal system, Extraction system, 2 x rotary joint, 4 channels, Workpiece clamping pressure 80 - 210 bar, Tool breakage monitoring Renishaw, Robot interface, Fgsdpfozzlmcex Aggog Part clamping control, Robot cell, Fanuc robot, 6 axes - payload 25 kg, Automatic part loading and unloading via a 212-station pallet system.

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: Fgodjy Na Hvepfx Aggog – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm Fgodpozx R Awsfx Aggog -Grinding stroke during orbital grinding 190mm -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics -Further accessories (SEE PICTURES) -Documentation -Tool cabinet Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 6 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 1,000 mm, working width: 700 mm, Equipment: CE marking, cooling unit, documentation/manual, Laser Cutting Machine Brand: BODOR - TUV - CE - with pneumatic clamping table Type: i5 Table: 1500x700mm Laser: 3000W (required for brass) Including pneumatic clamps/table Fodpfeyq R N Nsx Aggsgg Main components: 1. Bodorgenius Autofocus laser head 2. Cast iron machine bed 3. Japan YASKAWA servo motor 4. Taiwan ball screw 5. Japan Omron electric component 6. Taiwan square guide rail 7. Exhaust system 8. CW water chiller 9. Bodorpro 2.0 control system 10. Green glass 11. Automatic lubrication device 12. Wifi wireless control 13. Closed protective cover 14. 21.5-inch touchscreen 15. Scan cut (special for high-reflective materials) Technical parameters: Max cutting area: 700*1500mm X/Y axis positioning accuracy: 0.05mm X/Y axis reposition accuracy: 0.03mm X/Y axis max movement speed: 60m/min Max acceleration: 1.5G Max load capacity: 250kg Dimensions (L*W*H): 2980×2220×1970mm Total weight: 2000kg

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Fgsdob Rnv Sjpfx Aggeg Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction Fgjdpfx Ajzv U Nceggjg *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Available for pickup in Enkhuizen around the beginning of October 2026.

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Fjdpfx Aszzw Edeggegg Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: used, heavy-duty saw head with a robust base and material clamp for non-ferrous metals and aluminum, saw blade 350 mm, more powerful motor, with pneumatic feed and 2 pneumatic material clamps. Fedpfszwhd Asx Aggjgg

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-43-0070, functionality: fully functional, operating hours: 2,731 h, power: 10 kW (13.60 HP), input voltage: 300 V, input current: 32 A, year of last overhaul: 2026, Equipment: documentation/manual, 3-AXIS (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable machining head Vertical table (workpiece) Cec Ard Uoyywcvspnjrd Control system: POWERCONTROL + POWERTOUCH Software: woodWOP Safety cabin for the machining head No. 1 locking system for workpiece clamps in the working area Workpiece drive with transport chain Minimum workpiece dimensions (X-Y-Z) mm 200 x 70 x 12 Maximum workpiece dimensions (X-Y-Z) mm 3050 x 850 x 60 Total connected power (kW): approx. 11.5 WORKING GROUPS: No. 1 drilling unit (Power (kW) 2.3) with vertical spindles: - No. 13 independent vertical drilling spindles (V13 High Speed) - No. 6 independent horizontal drilling spindles (4 in X + 2 in Y) No. 1 grooving saw unit (for operations in the X-axis) diameter (mm) 100 No. 1 vertical main spindle (milling unit) HKS63 (Power kW 5) Fgsdpfx Agszi Ul Rjgsg Automatic tool changing system - magazine positions (No. 4 tool positions)

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Fodpfjzqvhvex Aggogg

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Fgjdpfxozp E T Sj Aggjg Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. Fedpfxoy Um T Ho Aggogg 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) Fjdpfjztl Scox Aggogg - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page Fgjdpjy Uwxtefx Aggog – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee

Condition: excellent (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / Single-shift machine / Very low operating hours Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / Pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool Magazine: 208 tool positions Rack tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet change system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (as per nameplate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of manufacture: 2007 Fgodpfey H D R Tox Aggog Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filtration unit Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant periphery Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Multiple heavy-duty angle plates, fixture plates, t-slotted/platen clamping plates, customer-specific clamping devices, and pallet setups are available. Tools / Accessories: Numerous SK50 tool holders, boring bars, boring tools, milling holders, drill and reaming tool holders, extensions, adapters, as well as various spare and standard tools are visible. Several hundred additional tool holders can be purchased on request. Optional / On Request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool storage / racking systems by agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for the flexible complete machining of large and complex workpieces. The work area shows normal signs of wear characteristic of a production heavy machining system. The system must be removed from the facility in June 2026. Earlier availability possible by arrangement. Inspection under power is possible by appointment. All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15066, 1 x Atwell Labellers Ltd inline 3-head side-apply labelling machine with ICE Zodiac ES 8.4 Clarity thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. The label dispensers are run by a servo / stepping motor and is controlled by a micro-processor. Manufacturer - Atwell Labellers Ltd and EME etiketteringsmaskiner ApS. Models of Labelling Heads - 2 x EME Series 4000 and 1 x EME Series 2000. Model of Conveyor Section - EME MO-3000-S4-S2. Serial Number - 15066. Date of manufacture - 2015. Fodpfx Ajy Hkqyoggogg Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (adjustable - can go higher).

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Fjdpozw Ukcofx Aggsgg Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 Fedpfxjw U Tlzs Aggjgg K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Fedpfx Asyhd Iysggjgg Click on the link below to see a video of the machine running.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 510 rpm, table length: 457 mm, table width: 457 mm, overall weight: 1,200 kg, Kearns ‘S’ Type Horizontal Borer Fsdpezv T Dlsfx Aggegg Table Size 457 x 457mm Long Travel: 610mm Cross Travel: 305mm Vertical Travel: 286mm Facing Head Diameter: 250mm Spindle Speeds (6 off): 45 - 510 RPM

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Fedpfx Agezw D Haogsgg Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: ready for operation (used), Year of construction: 2022, This 3-axis PERTICI 600TSE Circular Metal Saw was manufactured in 2022. It features a cutting length of 5100 mm and a saw blade diameter of 600 mm. The machine is equipped with a hydropneumatic feed mechanism and a double-cylinder clamping system for enhanced precision. If you are looking to get high-quality cutting capabilities, consider the PERTICI 600TSE machine we have for sale. Contact us for further details. Fedpfezzp Nbex Aggogg - Cutting Length: 5100 mm- Saw Blade Diameter: 600 mm- Controlled Axes: 3 controlled axes (Electronic positioning X-axis, controlled tilting angles)- Cutting Angles: Inward up to 45°, Outward up to 20° (Variable angle range 20° - 135°)- Feed Mechanism: Hydropneumatic cylinder with infinitely variable feed adjustment and rapid return, linear guide rails with recirculating ball bearings- Clamping System: Double-cylinder horizontal clamping system and vertical material clamping system for both heads- Safety System: Local pneumatic drop-down safety guards on both heads- Control Unit / Display: Industrial PC panel with 15" TFT Touchscreen monitor, USB port, Ethernet port (LAN)- Operating System: Windows Embedded- Control Features: Memory capacity up to 1000 profile data, cutting list optimization, online diagnostic assistance

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Fedpfx Ajzy N Nlsggsgg Counter Spindle Yes Driven Tools Yes