Used Rilesa Rep-Borem. for sale (452)

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Hfjdeu Thpnopfx Apnog Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Hedpfxjudb Hcs Apnefg Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: refurbished (used), Repair of speed control board Hfodsy Rfzuepfx Apnsg

Condition: like new (used), Unused stair treads, 900mm x 370mm. Price per piece, minimum purchase 10 pieces. Hjdpfxoy I Uz Ej Apnsfg

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Autotransporter REPO R2P – Top Quality for Safe Vehicle Transport! This trailer is the ideal solution for the secure and professional transport of: • Construction machinery and excavators • Other vehicles ✅ Robust and durable construction ✅ High stability and safety during transport ✅ Perfect for both private and commercial use This car transporter stands out for its quality, reliability, and well-thought-out design – ideal for anyone aiming to deliver vehicles safely to their destination. Technical specifications: • Manufacturer: REPRO • Model: Vehicle Transporter • Permissible total weight: 3,500 kg Hfsdpfoyqyf Tjx Apneg • Unladen weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5,290 mm • Width: 2,100 mm • Loading platform length: 3,500 mm • Drawbar load: 150 kg The trailer is in absolutely as-new condition and ready for immediate use. Location: Rheda-Wiedenbrück Price: €4,790 net plus VAT If you are interested or have any questions, please feel free to contact us! Viewing on-site can be arranged by appointment.

Condition: ready for operation (used), functionality: fully functional, hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO HPC 8-160 second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 new hydraulic pump . replaced in year 2019 n.8 cylinders diam.mm. 90 Hfsdpfx Asyyzwdopnsg max. thrust Ton. 160 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 10.000 volt. 380/50

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total width: 1,340 mm, total length: 8,600 mm, total height: 1,990 mm, overall weight: 2,000 kg, Equipment: documentation/manual, Horizontal forming and liquid filling packaging machine for Doy-pack pouches with handle and welded plastic spout, intended for liquids. Complete with buffer tank and liquid pump, plastic cap feeder, and cap conveyor. Operating manual and control panel available in Polish and English. Hedpfxsy Sm A Ns Apnefg Specification: Doypack packaging parameters: - Maximum pouch dimensions: 240 mm (width) x 310 mm (height) x 45 mm (depth) - Minimum pouch dimensions: 120 mm (width) x 140 mm (height) x 20 mm (depth) - Maximum filling volume: 1000 ml - Packaging speed: 50 pouches/min - Maximum diameter of film reel: 400 mm - Film reel core diameter (internal): 70–80 mm - Power consumption: 7–9 kW - Compressed air consumption: 0.4 m³/min - Net weight: approx. 2000 kg - Machine dimensions: 8600 mm (L) x 1340 mm (W) x 1990 mm (H) (excluding dosing units) - Voltage: 380 V ± 20 V (three-phase power supply)

Condition: used, Year of construction: 2008, Trepko 104 KSP – Filling & Closing Machine (Year 2008) Well-maintained Trepko 104 KSP inline filling and closing machine, suitable for butter, margarine, spreads, dairy products, and similar applications. Specifications: - Model: Trepko 104 KSP - Serial No.: 3702 - Year: 2008 Hedpex A Er Iofx Apnefg - Capacity: Up to approx. 200 cups/min (4 lanes, 50 cycles/min) - Filling System: Servo-driven piston filler for high dosing accuracy - Closing System: Foil heat sealing + option for snap-on plastic lids - Construction: Stainless steel, hygienic design Documentation: - EC Declaration of Conformity - Pneumatic schematics - Manuals included Key Features: - Fully automatic inline operation - Quick format and product changeover - Reliable and robust machine design - Suitable for dairy and food production - Machine has been out of operation for the last two years - Good technical condition, available for immediate sale. Location: Denmark Filling volume: 200, 250, 400, & 500 grams.

Condition: good (used), Year of construction: 2002, A-3900-Trepko-DoubleCup-fillingmachine Trepko filling machine for cups type 106 K.S. (P) Year of production: 2002. Capacity 10.000 pieces/hour Cup dimension Ø95 Hfedpsd Iytxefx Apnsg 2 pieces of tools Can work with double tools/cups (see photos) CEE machine, incl. complete electrical documentation and Mechanical documentation. Robot packing machine and other equipment can takes with that. Sale complete line: Spoon applicator. Case erector Norway. Robot for stacking in cartons. Palletizing. Stationed: Denmark Can be take from function Juni 2019.

Condition: used, Trepko filling machine for cups type 106 K.S. (P) Producer: Trepko Denmark Capacity 80 packing/min. 2 lane cup filler Hfjdpfxsfvqm Re Apnsg 2 format tools sets for cups 80 x 95 mm & 80 x 115 mm Can uses for Butter, margarine, yoghurt, soft cheese, etc. Incl. pallet with extra spare parts

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. New nozzle and new print bed just installed, ready for new owner. Hfsdpjvblu Dsfx Apneg

Condition: good (used), Regal Trepko rotary pot filler and sealer. Was previously used in a UK factory packing dairy products like yoghurts, cream, sauces etc. Hfjdpfx Apepgqtzensg

Condition: used, Hydr. scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Hedpfx Apod I Nrponsfg Platform size 1700 x 1100 mm Lift max. 515 mm Lower table height with rail rollers 535 mm Table height without rail rollers 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed rail trolley approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual button for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the undercarriage - Lifting scissors with two lifting cylinders - The table could be moved on rails, 4 rollers on the base frame, Ø 200 mm - Rail rollers driven by SEW geared motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm Own weight approx. 1.3 tons. good condition

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Hjdpfx Apovnr Rrenjfg Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. Hfsdovntb Sepfx Apneg The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is Hfodpfx Aovntmnepnjg attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Steel stairs / Machine steps used Floor height : ca. 515 mm projection : ca. 590 mm total width : ca. 700 mm mesh size : approx. 25 x 25 mm material color : yellow Step dim.: 1x approx. 675 x 250 mm ( upper step ) 1x approx. 475 x 250 mm ( lower steps) Number of steps: 2 pieces / steps inserted step height : approx. 265 mm General information about the article: This item is offered for pickup only. A transport desired beyond that Hodpshhxu Hefx Apnofg or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m. Spare parts for sale. Picture 1. Controller, electronic components, tools, vacuum pump, frame parts, etc. Comes with tools of various sizes. Sold in the condition shown in the photo. Complete forming parts set €4000. See picture 2. Flender motor ZF48-M100LB4, €250, picture 3. Busch vacuum pump Wv1000B-001 KDFC, €1200, picture 4. Automatic double-line label printer and spreader, complete, €1500, picture 5. Rotary cutter for hard foil, €500, picture 6. Outfeed conveyor, €300, picture 8. Selling as a bundle for €2000, as is. Complete die set €2000. HMI and electronic components. Other parts. Hsdpfx Aeu Hz Tdopnsfg

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Working pressure: 3 bar Pump: yes Hfedpfx Ajittfnopnog Flowmeter: yes We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: good (used), Year of construction: 1978, scissors lift table make.TREPEL type:S100/6 year 1978 Load capacity: 10 000Kg. Working pressure : 220 Bar Panel size : LXB 2500mmX1250mm Height min: 670mm Max height : 1230mm Hjdpofluupofx Apnefg Operation via foot pedal .

Condition: new, CAR SPARE PARTS STOCK LOT. We have various stock lots consisting solely of new car spare parts from 2000 to today. New and original spare parts from the most important European brands. Mechanical, electrical and electronic parts – from suspension components to engine spares. Hfodoyziidepfx Apnsg

Condition: used, Segment length: 3000 mm Web width: 760 mm frame width: 810 mm Hfedpfx Apsglam Soneg Roll diameter: 80 mm roller pitch: 100 mm

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm Hfodpfxefzlvmo Apnjg -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 30 mm -Price: complete Hfsdpfjv Rmmyex Apnog -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total width: 1,340 mm, total length: 8,600 mm, total height: 1,990 mm, overall weight: 2,000 kg, Equipment: documentation/manual, Horizontal forming and liquid filling packaging machine for Doy-pack pouches with handle and welded plastic spout, intended for liquids. Complete with buffer tank and liquid pump, plastic cap feeder, and cap conveyor. Operating manual and control panel available in Polish and English. Specification: Doypack packaging parameters: - Maximum pouch dimensions: 240 mm (width) x 310 mm (height) x 45 mm (depth) - Minimum pouch dimensions: 120 mm (width) x 140 mm (height) x 20 mm (depth) - Maximum filling volume: 1000 ml - Packaging speed: 50 pouches/min - Maximum diameter of film reel: 400 mm - Film reel core diameter (internal): 70–80 mm - Power consumption: 7–9 kW - Compressed air consumption: 0.4 m³/min Hjdpfx Aoyq Rrdepnofg - Net weight: approx. 2000 kg - Machine dimensions: 8600 mm (L) x 1340 mm (W) x 1990 mm (H) (excluding dosing units) - Voltage: 380 V ± 20 V (three-phase power supply)