Used Rutil 120/20Mp1 for sale (8,891)

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale Fpedpfstzbvyox Abmeg year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 Fjdevzrxcjpfx Abmepg CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Compressor 1pc - Hermetic SCROLL type SZ125S4CC refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit - Connect the Touch microprocessor-controlled electronic control

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers Fpsdpfxed Aqqze Abmog If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 669604, overall weight: 1,192 kg, load capacity: 120 kg, arm reach: 3,500 mm, controller manufacturer: kuka, controller model: fives Cinetic 15A81-02, teach pendant manufacturer: kuka, teach pendant model: 00-168-334, control cabinet width: 1,100 mm, control cabinet height: 1,910 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, repeat accuracy: 0.06 mm, warranty duration: 6 months, The KUKA robot has been meticulously serviced by KUKA and was last operated in 2024. Its full machine operation was successfully tested prior to removal from a automotive site in 2026. Complete with all relevant cables, pendant, accessories and end of arm tooling. Versatile, streamlined, powerful and robust – those are the typical characteristics of the KR QUANTEC series, the best-selling robot series from KUKA. Fodpfx Ajy R Aicobmopg We have 2 available.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Fpodjygkuwepfx Abmjg Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Fedswvhrtjpfx Abmspg Year: 2011

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Fedpfxexzf Dzo Abmopg Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Fpjdjxyw Sbspfx Abmeg Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: good (used), Year of construction: 2011, Manufacturer: RÖSLER Type: MINI 120 Year of manufacture: 2011 Bowl volume 120 liter Out side diameter 910 mm Width processing channel 210 mm Overal channel length 1950 mm Power 0.75 kW Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) Fsdpfxjvt Tl Uo Abmopg There are no dimensions (yet) for this machine. Please note: The information on this page has been obtained to the best of our knowledge and belief from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2006, pipe diameter (max.): 120 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 6 mm, bending radius (max.): 200 mm, bending radius (min.): 10 mm, overall weight: 12,500 kg, total length: 5,000 mm, total width: 2,200 mm, power: 12 kW (16.32 HP), Tube bending machine MEWAG - RB 120 A-Digi Fjdpfsy E Hu Ejx Abmjpg MACH-ID 9605 Make: MEWAG Type: RB 120 A-Digi Year: 2006 Max.Tube Ø: 120mm Min. Tube Ø: 10mm Max. Wall thickness:6mm Max. Bending radius:200mm Min. Bending radius:10mm Max. bending length:3000mm 3e dimsion bending:yesmm/min. Power: 12kW Number of tools: 8 Length: 5000mm Width: 2200mm Height: 1mm Weight: 12500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Faro Focus 3D 120 Laser Scanner, In Flight Case with 3 x Batteries and Charger, SD Card and USB Stick, Safety Glasses, Power Leads, 2 x Flight Cases with 10 Reference, Spheres and 8 Mounted Base Plates, Quick Start Guide Manual. S/No. LLS061101008 Fjdpfx Absy Idlgsmspg Please Note: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical Fodpfx Aboy Iw Etsmepg - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler Fpodpfx Ajyfg Htsbmeg

Condition: good (used), mileage: 135,075 km, power: 88 kW (119.65 HP), first registration: 03/2022, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,400 mm, total width: 1,960 mm, total height: 2,150 mm, loading space length: 2,510 mm, loading space width: 1,660 mm, loading space height: 1,390 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Halogen lamp - Incl. ladder roller and steps - Manual - Radio/cassette - Fabric upholstery - Partition wall = Notes = Configuration: 4x2, Unladen weight: 1859 kg, Gross vehicle weight: 3050 kg, Cab type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: none, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: white, Lighting type: halogen lamp, Bluetooth, Engine power: 88 kW (118 HP), Fuel: diesel, Euro standard: 6, Drive system: timing chain, Transmission: manual, Gears: 6, Power steering, ABS, ASR (traction control), Starter battery, Body type: raised, additionally extended, side walls lined, Roof rack: incl. ladder roller and steps, Side doors: 1, Rear access: double doors, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat cover: fabric, Seat adjustment: manual, long wheelbase, air conditioning, roof rack, steps, Spare wheel, Tire type: summer tires = Further information = General information Number of doors: 1 Fodpey Iwawefx Abmepg Registration number: KLEYN1 Axle configuration Tire size: 205/65R16 Brakes: disc brakes Suspension: coil spring Axle 1: Tread depth left: 7 mm; Tread depth right: 7 mm Axle 2: Tread depth left: 7 mm; Tread depth right: 5 mm Weights Curb weight: 1,859 kg Payload: 1,191 kg Gross vehicle weight: 3,050 kg Functional Loading platform height: 55 cm Maintenance APK (general inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial information Lease price: €260 per month (commercial van, 72 months); Please ask for further information and terms

Condition: new, Year of construction: 2021, operating hours: 240 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.550 kg Mast: articulated arm Lifting capacity: 200 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Fpjdpoxhbrzefx Abmsg

Condition: excellent (used), C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm Fjdpfjr R Abhsx Abmspg -Number: 2x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Condition: used, mileage: 517 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,450 mm, first registration: 01/2023, fuel tank capacity: 90 l, CO₂ emissions: 235 g/km, emission class: euro6, color: white, number of seats: 6, number of previous owners: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, traction control, trailer coupling, = Additional Options and Equipment = - Android Auto - Apple CarPlay - Heated exterior mirrors - Bluetooth Fodpfx Asvpfuaebmopg - Front electric windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Hill-hold control - Wooden loading bed - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Multifunction steering wheel - Emergency brake assist - Radio with DAB - Reversing camera - Sidebars - Start/stop system - Engine immobilizer - Blind spot monitoring - Partition wall = Additional Information = General Information Number of doors: 5 Model range: Aug. 2022 - Feb. 2024 Cab type: Double Technical Information Torque: 310 Nm Number of cylinders: 4 Engine displacement: 2,179 cc Transmission: 6-speed manual Top speed: 155 km/h Dimensions Length/Height: L2H2 Dimensions (L x W x H): 554 x 205 x 252 cm Weights Unladen weight: 1,915 kg Payload: 1,085 kg Gross vehicle weight: 3,000 kg Interior Interior: Black Consumption Average fuel consumption: 8.9 l/100km Maintenance, History, and Condition APK (Dutch MOT): valid until 11.2026 Number of keys: 2 (1 remote) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: good (used), mileage: 73,414 km, power: 154 kW (209.38 HP), first registration: 02/2023, tire size: 265/70R17.5, axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 4,600 kg, permissible axle load (axle 2): 8,500 kg, Year of construction: 2023, Equipment: central locking, electric window regulation, onboard computer, tail-lift, = Additional options and accessories = - Aluminum fuel tank - Leaf suspension - Enclosed cab - Cab - Air suspension = Notes = Iveco Eurocargo CNG Fpodsy Rxt Dopfx Abmsg 120-210 2/2023 63,000 km Steel/air Iso box 540x248x205 Zepro lift 2000 kg, remote control = Further information = Fuel type: Natural gas Tire size: 265/70R17.5 Front axle: Max. axle load: 4,600 kg; Steered; Tread left: 50%; Tread right: 50%; Suspension: Leaf springs Rear axle: Dual tires; Max. axle load: 8,500 kg; Tread left inside: 50%; Tread left outside: 50%; Tread right inside: 50%; Tread right outside: 50%; Suspension: Air suspension Gross vehicle weight: 11,990 kg Tail lift: Zepro, rear, 2,000 kg Technical condition: good Visual condition: good

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers Fpedpswvqzqofx Abmog -Machine transport roller: 2 tank rollers -Load capacity: 5 tons/piece -Submission/Price: complete -Dimensions: 220/120/H75 mm -Weight: 7.7 kg/pc.

Condition: used, mileage: 180,000 km, power: 154 kW (209.38 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,460 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,320 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, Year of manufacture: 2019 Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Suspension: air suspension Empty weight: 7.201 kg Carrying capacity: 4.789 kg GVW: 11.990 kg Tail lift: Dhollandia, tail lift, 750 kg Cool unit make: Carrier = Additional options and accessories = - Camera system Fsdpjy Rryqsfx Abmspg - Outside temperature display - Radio/CD player - Reversing camera - Visor = Remarks = Cool unit brand: Carrier

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Fpodpfx Aoy Nrynobmeg

Condition: ready for operation (used), Heidenhain UV 120 ID 344504-01 Fpsdpsy Nrl Defx Abmsg The costs include only the repair analysis of your component, which you can send to us. After the evaluation of your component, you will receive a cost estimate with the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and covered by a 3-month warranty from us.

Condition: ready for operation (used), Heidenhain UV 120 ID 344504-02 The costs cover only the repair analysis of your component, which you can send to us. After the inspection of your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the costs for the analysis will be waived. During the repair process, your component will be fully overhauled and will receive a 3-month warranty from us. Fpodpfx Ajy Nrl Rsbmog

Condition: ready for operation (used), AMK DH13-120-4-I0F main spindle motor SN: C707AD, professionally fully overhauled and tested, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and shipping! Fodpey Nn Hqefx Abmepg

Condition: new, GMN HV-X 120-45000 / 18 high frequency spindle, serial number as per photo, unused, 100% functional, scope of delivery as per photos Fpodpei D U T Iefx Abmsg