Used Spea Board Tester for sale (3,535)

Year of construction: 2014, condition: not inspected (used), Distribuition Board CTP_PWR2_400 Magnus Interlook Board Drum Driver Module Ncjdpfx Aohcz Hxodter Output Rollers

Condition: new, power: 189 kW (256.97 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 2,480 mm, loading space width: 2,480 mm, loading space height: 2,050 mm, Year of construction: 2026, Equipment: ABS, navigation system, parking heater, soot filter, Equipment: * Mechanically reinforced cab suspension * Extended Day Cab * Central locking system * Exterior sun visor, green, translucent * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Electrically adjustable mirrors * Mirror brackets, 2.50 - 2.60 m body width * Headlight beam for right-hand traffic * Rear-view camera * Headlight surrounds and bumper in cab colour * Cab steps and wheel arches in cab colour * Chassis colour: anthracite grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver’s seat: air-sprung luxury seat * Auxiliary heater Air Top 2000 * Driver’s seat armrest * ECAS remote control * Converter 24V to 12V, 15A, 180W * Passenger seat: fixed, velour * Engine tunnel storage compartment * Air conditioning * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * FMS interface, prepared * Adaptive cruise control with FCW and AEBS-3 * Preparation for toll system * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FM/DAB/DAB+ radio with loudspeaker incl. phone connection * Driver Performance Assistant * Manual master switch * Lane change warning system * Electronic Stability Control (VSC) * Reverse warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Speed limit recognition * DAF Drowsiness and Distraction Detection * Rear: 8.50t, air suspension, SR8.14 * Front: 4.50t, parabolic, 45N * Front axle 1: 4,480 kg, load index 136 * Rear axle 1: 8,480 kg, load index 134 * Silver-grey wheel trims * Goodyear * Tire pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * Steel disc wheels, silver-grey * F1,245/70R17.5GO * R1,245/70R17.5GO * Rear axle ratio 3.73 * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive gearbox, 4.89–0.64 * Engine PX-7, 189 kW/257 hp. Cab emblem: 260 * Emission standard Euro 6 * Traction control (ASR) * Standard transport, full version * Idle shutdown automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase 4.65 m / rear overhang 2.75 m * Plastic fuel tank, 155 l Ncsdpfoyy Evwjx Adtor * Front underrun protection * Splash guards * AdBlue® tank 30 l, right-chassis side * Fuel tank left * AdBlue® filler without lock * Rear lights with bulbs * EAS unit right, exhaust outlet rear facing * For use with drawbar, type plate, up to max. gross vehicle weight * Pneumatic trailer connection, turntable coupling * Crossbar D85-Dc70-V25, coupling D85 A, fitted * Trailer electrical + EBS connection, 24V/2x7-pin * Body mounting BAM 1, loose brackets * ECAS control * Body functions * Body connector on chassis * Side marker lights * Tail lift application * Fixed steering right, no 1st right * Alternator 100A, batteries 2 x 175Ah * Permissible chassis weight max. 11,990 kg * Air intake above, behind cab * Heated water separator * Plus Driveline Guarantee – 3 years – 200,000 km * Standard fuel quantity Body: * ZIKUN Swing-Board I body * Technical data: Clear loading length: 6,150 mm * Loading length: 6,300 mm * Clear loading width * Rear portal: 2,480 mm * Internal loading width: 2,480 mm * External width: 2,550 mm * Clear loading height: 2,050 mm * Load-in height approx.: 1,022 mm * Total height approx.: 3,222 mm * Body weight approx.: 2,600 kg

Year of construction: 2025, condition: new, functionality: fully functional, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 3kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 3kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: Ncedpfx Asd H S Hisdtor • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: pressure platens Screw and wedge grips bending grips Special designs according to customer specifications • extensometer • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • putting into operation and training

Year of construction: 2025, condition: new, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 5kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 5kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: compression platens Screw and wedge grip Ncedpfod H S Rrex Adtor bending fixtures Special designs according to customer specifications • extensometer / strain gauge: • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • Commissioning into operation and training

Year of construction: 2025, condition: new, Economical two-column microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 10kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 10kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: copression platens Screw and wedge grip bending fixtures Special designs according to customer specifications • extensometer / strain gauge: Long-distance strain gauge • Temperature and climatic chamber • W-Software PM-Soft-Smart for universal use, freely programmable Ncjdod H S R Uopfx Adtsr • Commissioning and training

Condition: good (used), Year of construction: 2010, functionality: fully functional, Light fastness tester with water-cooled xenon arc lamp + 600 h of operating time left on the installed xenon arc lamp Nodpfey Dht Hex Adtjcr + 1 new xenon arc lamp included (value: €2,500)

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * Emissions Standard Euro 6 * Automated Transmission, TraXon, 12 gears * Standard Component Arrangement * Fuel Tank on Left * DAF Connect * Warranty Plus Driveline - 3 years - 300,000 km Options * Exterior Sun Visor * LED Headlights, Cornering and Fog Lamps * Central Locking, 3 Keys, 2 Remote Controls * Lower Step Cabin in Crystal White * Steering Wheel with Silver Accents * Door Trim: Loose Weave Fabric * Driver's Seat: Luxury Air * Armrests on Both Sides of the Driver's Seat * Passenger Seat: Cinema & Table, Fabric Cover Njdetv T Avspfx Adtocr * Dashboard Table * Cool Box or Refrigerator * Automatic Climate Control for Cabin * Parking Heater with Waste Heat Pump and Timer * Roof Hatch with Electric Operation * Accessory Power Supply: Standard + 2x 40 A * ECAS Remote with Extended Functions * Toll Preparation * Digital Tachograph, VDO 1C, Version G2V2 * Speed Limiter Setting: 90 km/h * DAF Infotainment Luxury Plus, Luxury Speakers * Antennas: DAB-Prep. Radio, 2x Mobile, GNSS Extra: CB * Wireless Charger * Reversing Warning System * Front: 8.00 t, Air Suspension, 161 N * Front Air Suspension: Medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 Engine, 330 kW/449 HP, Cab Emblem: 450 * 12-Speed TraXon Transmission 12TX2210 DD, 16.69-1.00 * Rear Axle Ratio 2.47 * Mechanical Differential Lock * MX Engine Brake * Parking Brake Assistant * Wheelbase 4.60 m / Rear Overhang 2.55 m * Longitudinal Members 260/7.0 mm, Continuous Inner Reinforcement * 545-l Aluminum Fuel Tank Left, Height 620 mm * Use with Drawbar, Type Plate, up to Max Gross Vehicle Weight * Crossmember D137 + Rockinger Coupling D130 * Pneumatic Coupling for Trailer, Swivel Coupling * Electrical Connection for Trailer, 24 V/15-pin * Hard-wired Body Signals and Warnings * Side Marker Lights * Body Mounting Method BAM 1, Console Type B * Tail Lift Application * Hard-wired Steering Right, No First Right * Alternator 130 A, Batteries 2 x 210 Ah AGM * Battery Energy Monitoring Day Registration 03.12.2025 Payload: 14,390 kg Body: ZIKUN Swing-Board I Body Technical Data: Through-loading length: 7,250 mm Loading length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Entry height: approx. 1,199 mm Overall height: approx. 3,549 mm Underframe: Stable lightweight construction ZIKUN Flap Swivel Mechanism Fixed Roof Powder-coated in RAL 9010 Pure White Collision protection: Welded steel buffer strips on both sides for impact protection. -- PVC mudguards on rear axle -- Holder for wheel chock + 2 chocks -- Red position lights above tail lift -- Side contour markings in white, rear in red The entire body is sandblasted, primed, and painted or powder coated in one color. Underframe and Superstructure: DAF E1980 WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic rods (CRS System Ancra-Jungfalk, Dekra certified to VDI 2700 Code XL). Sliding access step Pallet protection edge left and right. Interior lighting as LED spotlights mounted at the top rear, connected to cab switch. Additional interior lighting as LED spotlights mounted at the rear. Front wall/bumper plate made of aluminum-

Condition: excellent (used), For sale: professional portable surface roughness tester Mitutoyo SJ-210 manufacturer code: 178-560-01D drive: 0.75 mN Made in Japan Device for precise measurement of surface roughness according to ISO 1997. Condition: Used, in very good technical and visual condition. Nsdpfoyc Rwdjx Adtecr Fully functional. Display without any damage. Complete set as shown in the photos. Included: – SJ-210 measurement unit – standard drive attachment – Mitutoyo 178-601 reference specimen – power supply – cables – original carrying case – original packaging The device measures, among others: Ra Rz parameters compliant with ISO standards Ideal for: – quality control – CNC companies – tool shops – technical departments – measurement laboratories Industrial-grade equipment – this is not a budget laboratory version.

Condition: used, functionality: fully functional, overall weight: 50 kg, Offered is a mechanical Rockwell hardness tester for HRC measurements. The device comes from our quality assurance inventory and has been regularly maintained. The last documented calibration was performed by a specialist company in May 2020. Since then, the device has not been in productive use. This tester is ideally suited for workshops, toolmaking, or maintenance departments looking for a robust and reliable hardness testing solution. Technical Specifications: - Test method: Rockwell (HRC) - Mechanical force application - Selectable test force levels (see nameplate) - Heavy-duty construction - Stable test table with fine-thread spindle - Analog display Condition: - Used - Good visual condition Njdpfx Adjyw Hziotocr - Complete - Last calibration: 05/2020 - Currently without valid calibration certificate Business Note: Mechanical Rockwell testers of this design are extremely durable and require minimal maintenance. The price offered enables an economical entry into hardness testing – significantly below the cost of modern new equipment. Location: Eisenach Collection preferred (high weight), loading by arrangement possible. Sale is made excluding any warranty or liability for material defects. The device is sold as seen.

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Test height: 260 mm Throat depth: 200 mm Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. Njdjyybt Eopfx Adtocr We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. Ncodpfovvpb Rsx Adter 10 hp engine.

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Ncodpfxjf Axn Aj Adter Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Ncedpfx Adjd Dc Unotjr Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: used, This listing is for The Palltronic Flowstar XC Nodpfx Adjydqf Dstscr The unit is in full working condition and is ready for immediate use The Palltronic Flowstar XC is a filter integrity testing instrument used mainly in biopharmaceutical, lab, and industrial filtration environments. It’s part of the Flowstar family of integrity testers designed to assess the performance and integrity of filters by directly measuring flow, which helps ensure that filtration systems are operating correctly and safely

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-preserved HIT curve conveyor / board or model separation, robust design, conveying height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with 6x2 slat carriers. Integrated flush roller track. Transfer cross conveyor, height-adjustable. Slab discharge flap. Driven by SEW gear motor with brake. Conveyor is split and bolted for transport. Disassembled and loaded free onto truck. Ideal for use upstream of a double edger or stacking system. Njdpfxjxl Edie Adtscr

Year of construction: 2002, condition: ready for operation (used), Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible. Ncsdsytgn Hepfx Adtsr

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester Nedpoycczuofx Adtecr -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester Ncsdpfx Aeyccvfsdtsr -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Ncodpfx Asyapwkodtor If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: Nodoyankiepfx Adtjcr For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: used, Multiplex boards used length 1680 mm width 1250 mm board thickness 45 mm weight 68,5 kg Ncjdpfx Ael Uvxnjdtor in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: used, This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester. The unit is in full working condition and is ready for immediate release. The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications: Key Features: Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card. Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges. Comprehensive Testing Protocols: Includes a variety of tests such as: - Diffusion Test - Bubble Point Test - Combined Diffusion and Bubble Point Test - Water Intrusion Test - Water Flow Test - Pressure Drop Test - Multipoint Diffusion Test - Data Reporting: Generates complete paper reports to meet cGMP requirements, detailing: - Test parameters (pressure, time) - Results (net volume, pressure drop, evaluations) - Filter cartridges used and products tested - User-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction. Manufacturer Specifications: Power Requirements:Operating Voltage: 100-240 V ±10% Phases: 1 Ph/N Grounding Conductor: Separate SL (yellow-green) Frequency: 47-63 Hz Protection Rating: IP 44, indicating resistance to dust and splashing water. Ncsdoxxyarspfx Adtor Pressure Specifications: Maximum Operating Pressure: 10 bar g Operating Pressure: Minimum 4 bar g Internal Limit Pressure: 10 bar g Maximum Power Input: 74 Watts Installation: Must adhere to VDE regulations.

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used Ncsdpfx Aeifpg Ajdtjr For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Ncodjxqxt Ijpfx Adtjr Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. Nedpfjxqxw Tex Adtecr The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2