Used Stamp Holder for sale (7,407)

Condition: good (used), Internal item no.: 26039 160x SK40 (DIN 69871) tool holders Including collet chucks, drill chucks, Weldon holders, face mill holders, SK40-MK Dimensions (LxWxH): 80 x 65 x 200 cm Weight: approx. 500 kg The tool holders are in well-maintained condition and can be inspected by arrangement on over 500 m² of heated storage space. Dcodpfx Asy Hpqfsl Njh

Condition: good (used), Internal item no.: 25089 Tool holder Thread whirling holder Index / Traub No.: W7045012B Very well maintained condition! The holder was used on a Traub TNL18. Dcodpfexu Uu Ajx Al Njh

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz Dcsdpfx Alji Db Ibe Neh - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. EROWA ER-070649 UPC chuck with ITS Chuck 100P. The chuck was mounted on a measuring machine and thus was not subject to load or contamination. The clamping plate is in very good condition and fully functional. Inspection possible by appointment. Dsdpfxjy Rzx Nj Al Noch Shipping and inspection available!

Condition: good (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016093. Clamping force: 32,000 N. UPC dimensions: 320 x 300 x 64.5 mm. The UPC chuck is in good condition and fully functional. Inspection by appointment is possible. Shipping and inspection available! Dedpfx Alsy Rzttj Njch

Condition: good (used), Tool holders for milling chucks, spindle head holders, modular tool pockets, tool holder sets, assembly trolleys, CNC transport trolleys -Assembly trolley: for 64 pieces of SK50 tool holder -Transport trolley: heavy-duty design -Number: 2 trolleys available, 1 with 2 swivel casters / 1 with 4 swivel casters -Price: per trolley Dcsdpon D Urajfx Al Njh -Dimensions: 1140/500/H930 mm -Weight: 60 kg / 63 kg

Condition: good (used), functionality: fully functional, tool type: SK 40, SK40 Cutting Wheel Holder Lorenz 4 pcs tool holders / cutting wheel holders / slotting wheel holders for cutting wheels / slotting wheels / slotting cutters in size SK 40 for Lorenz gear shaping machine. Matching tool change device / tool holding device included. In good used condition. 1 x Ø 31.75 x 120 for disc-type cutting wheel 1 x Ø 44.45 x 84.5 for disc-type or bell-type cutting wheel Dcodpsikvwqofx Al Njh 1 x Ø 44.45 x 84.5 for disc-type or bell-type cutting wheel, special holder with central mounting bore Ø9.9 for auxiliary tool 1 x MK2 for shank-type cutting wheel. Price / details on request. All technical data subject to errors/typing mistakes. We sell exclusively to countries within the European Community.

Condition: excellent (used), Tool holders SK 50 DIN 280 Stock number (28638) 20 units as a package: 220 euros Transport and storage trolley: 150 euros Transport trolley dimensions: Width 800 mm Dcjdpey Invvofx Al Njh Depth 600 mm Height 840 mm

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Djdpfx Ajy S E U Rol Nsch Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Dedpjy Ra Dqjfx Al Nech Total weight: 10.5 kg Very good condition

Condition: good (used), Tool holder for SK 40 chucks Dedpjdm Supjfx Al Nsch -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price: complete

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN Dsdpfsr D N Eqox Al Njch 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih Dedpfx Ajvh Ndpol Njch no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: like new (used), Clamping device for spacer frames Weight: 1338 g Condition: Like new Dcjdpoy Rzlpsfx Al Noh

Condition: used, Selling several used powered tool holders / live tooling holders for CNC lathes, likely compatible with Mazak machines. 12 pieces VDI50 The following information can be identified on several of the holders: Manufacturer: Mimatic Number: 06.03117350.64 Ratio: 1:1 Dodpoy T Sd Uefx Al Njch Marking: 0707/09 and 0708/09 Mazak number on one holder: 5382801200 These are various designs / models of powered tool holders. The holders come from machine accessories and are sold together. Condition: Used, with visible signs of wear, paint chips, dirt, and storage marks. Functionality has not been individually tested by me. Therefore, the sale is explicitly as used and untested. Scope of delivery: All tool holders / chucks shown in the pictures. Important note: Please check the compatibility with your own machine using the pictures, numbers, and dimensions. I cannot provide a definitive statement about which Mazak model the holders are exactly compatible with. Asking price: Location: 64850 Schaafheim / Rodgau area Shipping or pickup: possible by arrangement. Sale: Used item, without guarantee, without warranty, and without return.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Dodpfjux Sfzjx Al Nsch Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Dedpfxjtx E Rqo Al Njch Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Dedjy Shyiopfx Al Nsch

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. Dcjdpfx Ajy Ulitjl Nsh There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email.

Condition: used, 50 pieces Dcjdpfx Aoy Ulx Usl Njh used SK 40 holders

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert Dcodpfxjxizb Ee Al Noh • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), For sale: professional SK40 tool holders with clamping according to DIN 69871-1 AD/B standard, suitable for CNC machining centres and milling machines. All units come from the dismantling of an industrial facility, are fully functional, precisely balanced, and ready for operation. - Type: SK40 × Ø6 × 80 mm - Standard: DIN 69871-1 AD/B - Max RPM: up to 25,000 rpm (G2.5) - Manufacturer: WNT - Condition: used, very good, ready for immediate use Dedoxgu Tijpfx Al Nech - Some holders are equipped with drills – ideal for immediate deployment Ideal for use in milling centres, CNC machines, tool shops, and manufacturing plants. Excellent build quality ensures high precision and repeatability of machining.

Condition: excellent (used), For sale: a complete set of SK40 tool holders in Ø10 size, brands HOLEX and Orion. Manufactured according to DIN 69871 AD/B, suitable for professional CNC machining centers. Technical data: • Taper: SK40 • Clamping: Ø10 mm • Standard: DIN 69871 AD/B • Manufacturers: HOLEX, Orion • Condition: used, fully functional, in good technical condition (visible signs of use). Applications: • End mills Ø10 • Drills Ø10 • Counterbores Ø10 Dcsdpfx Aexcy S Ajl Njh

Condition: excellent (used), For sale: Professional SK40 tool holder from the renowned manufacturer FAT (Fabryka Automatów Tokarskich). Model: 40.300.10 – Ø10×50. The holder is in very good technical condition and ready for use. The set includes a mounted tool (drill or milling cutter – see photos). Clamping type: SK40. Collet: Ø10 mm. Clamping length: 50 mm. Manufacturer: FAT / FATool. Condition: used, fully operational, ready for work. Please note, several units are available, all in the same Ø10×50 size. Djdjxcg Hyopfx Al Nsch

Condition: excellent (used), For sale: Single TC40xER16x100-AD tool holder (SK40 standard) from the renowned brand ZÜRN – Germany. Each tool holder is complete, equipped with an ER16 collet and a mounted tool (drill or milling cutter – see photo). Tool holder type: TC40xER16x100-AD (SK40). Collet: ER16 – ZÜRN Germany. Working length: 100 mm. Manufacturer: Made in Germany. Tool included – ready for use. Very good condition, original, tested. Applications: CNC machining centers, milling machines, tool workshops. Djdpfx Alsxcb Dao Noch