Used Tesa 200-225Mm for sale (16,296)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Iedoykub Aepfx Aaxotk Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Itodpfjzvf Dqox Aaxsk Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately. Isdszu R S Djpfx Aaxjtk

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Itjdpeudvt Rofx Aaxsk Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: new, Nieużywany pionowy zbiornik mieszający produkcji Langields o pojemności 7766 l. Wykonanie zbiornika ze stopu Nikiel 200 (BS3072N11). Wymiary zbiornika: średnica 1950 mm x długość prostej linii ściany 1950 mm. Dennice górna i dolna - elipsoidalne, spawane. Zbiornik jest przeznaczony do pracy na ciśnieniu do 18,35 bar i temperaturze do 200 C. Zbiornik jest wyposażony w montowane od góry mieszadło łopatowe, dwupoziomowe, z przykręcanymi łopatami. Napęd przez przekładnię z regulacją obrotów silnikiem el 3 kW. Mieszadło posiada dwa uszczelnienia mechaniczne wału i czujniki temperatury. Zbiornik jest zamontowany na czterech nogach ze stali węglowej. Itedpszbt U Nefx Aaxek

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Particularly noteworthy is the extensive range of accessories and the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC / peripherals Measuring functions: Height measurement Internal and external measurement Diameter measurement Distance measurement 2D/3D point measurement Geometry and position calculations Itodpfoy Tkg Uex Aaxsk Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders and fixtures Accessory case / wooden box The measuring device has already been disassembled and packed.

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Ijdsy Uvhyspfx Aaxjtk Width:800mm Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Iedpezu Ngajfx Aaxjtk

Condition: used, Year of construction: 2007, Attachment: Chamber filter press, used Type: Passavant Year of manufacture: 2007 Application: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Isdpjzk E H Ijfx Aaxetk Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are pressure filters that operate in a batch process for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our facility.

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min Iodpfxjiz Tzxs Aaxotk counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: as good as new (ex-display), Year of construction: 2019, Deighton econofry 200 wide belt 3m long fryer. never installed. can be supplied with a Deighton 200m battering and breading line Ijdpfxjxbudqe Aaxotk

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: AE/033731, functionality: fully functional, cutting height (max.): 60 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,650 rpm, overall weight: 3,006 kg, table height: 950 mm, Panel Saw – Technical Specifications Regarding the Casadei Busellato AXO 200 automatic panel saw, its key technical specifications are as follows: Itsdpfx Aajzkbhzsxok Parameter Value Cutting length 3800 Max. blade extension 60 mm Main motor power 9 kW Scoring saw motor power 1.3 kW Number of clamps (standard) 6 Main blade diameter 300 mm Scoring saw diameter 160 mm Main blade rotation speed 4650 rpm Scoring saw rotation speed 5850 rpm Work table height 950 mm Zebra GK4 20T label printer The machine is designed for cutting: MDF, particleboard, plywood, laminates, and other wood-based materials. The structural features include a rigid steel frame, a CNC-controlled automatic pusher, an air cushion table that facilitates the movement of panels, and the possibility of expansion with additional clamps and cut optimization. The saw will be in continuous operation on a part-time basis (1/4 of full-time) until the end of October 2026. Assistance will be provided with loading the saw. Disassembly for transport: 500 Euros. Loading onto a truck: 300 Euros.

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Itedpfozdki Uex Aaxek Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Isdpjyw I Hmsfx Aaxstk Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: used, Year of construction: 2021, functionality: fully functional, Lathe Twister FU-200, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series, and creative workshop projects. Key Technical Data - Machine type: Lathe / Woodturning Lathe - Center height: approx. 200 mm - Swing over bed: approx. 395 mm, with optional external turning device up to approx. 700 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW / 2 hp Itodpfxezuyt Ro Aaxok - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock / spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory note - Rotatable and adjustable spindle stock for flexible machining - Attractive complete package for hobby turners, workshops, schools, and makerspaces No warranty

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale at the highest bid! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Suitable for elastomer compounds for low, medium, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm MACHINE DETAILS Drive power: 72.5 kW Itsdpfx Aozr H Ebeaxjk EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing purposes

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Itjdpfxey St Sde Aaxek Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. Itjdpozu Avbefx Aaxok • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Itedjzux Elopfx Aaxek Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. Iodpfxszvhlkj Aaxjtk · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2020, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal pump in excellent industrial condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Iedjzrm H Espfx Aaxstk Year of manufacture: 2020 Capacity: 280 m³/h Head: 20 m Pump power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete with motor, coupling, and base frame Ready for installation The pump is sold as is, where is, without any warranty. Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Ijdpfx Aszilp Tjaxetk Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 3164, TESA Scan 50 plus – Optical/Tactile Shaft Measuring Machine Year of manufacture: 2005 · Diameter range: 0.5 – 50 mm · Measuring length up to 500 mm · Resolution: 0.1 µm · Complete with Dell PC, monitor, keyboard, and mouse TECHNICAL DATA • Manufacturer: TESA (now part of Hexagon Metrology) • Model: Scan 50 plus Ijdpfey Eqlxjx Aaxjtk • Year: 2005 • Measuring principle: Combined optical + tactile (contactless and tactile measurement) • Diameter measuring range: 0.5 – 50 mm • Length measuring range: 500 mm • Diameter resolution: 0.1 µm • Length resolution: 0.5 µm • Diameter error limit (20 °C ± 1 °C): 1 + D[mm] / 100 µm • Length error limit (20 °C ± 1 °C): 4 + L[mm] / 100 µm • Diameter repeatability: 0.5 µm • Length repeatability: 2 µm • Max. workpiece (D × L × m): 100 mm × 515 mm × 6 kg • Space requirement: approx. 1.3 × 0.8 × 1.2 m • Device weight: approx. 180 kg • Item no.: 3164 SOFTWARE • Pro-Measure (licensed) • Pro-Composer (licensed) SCOPE OF DELIVERY • TESA Scan 50 plus measuring device • Dell control PC • Monitor • Keyboard • Mouse CONDITION & HIGHLIGHTS Pre-owned device, fully functional • Precision measuring device from ongoing production • Software Pro-Measure / Pro-Composer included (licensed) • Ideal for turned parts, shafts, precision journals, and rotationally symmetric test parts • Supplied complete with Dell PC, monitor, and input devices – ready for immediate use MARKET COMPARISON Original purchase price approx. €40,000. ABOUT THE DEVICE The TESA Scan 50 plus is a high-precision optical-tactile shaft measuring machine for measuring rotationally symmetric workpieces such as shafts, turned parts, precision journals, pins, and similar test pieces. The device combines non-contact optical measurement with tactile probes, achieving a resolution of 0.1 µm for diameters and 0.5 µm for lengths. TESA (Switzerland) is now part of the Hexagon Metrology Group – a world-leading supplier of industrial metrology solutions. The Scan 50 plus is typically used in quality control labs, metrology departments in fine and small batch production, as well as in research and development. LOCATION & TRANSPORT Location: Central warehouse at Auktionshaus Köck, 6178 Unterperfuss, Austria. Self-collection or shipping by freight forwarder by arrangement. Transport costs on request. All information is provided without guarantee. Used device – sale is made to the exclusion of any warranty. Errors and misprints excepted.

Condition: used, Year of construction: 2023, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal process pump in excellent condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 05/2023 Capacity: 280 m³/h Head: 20 m Motor power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete plug-in unit with motor, coupling, and base frame Suitable for the food, beverage, dairy, pharmaceutical, and chemical industries The pump is sold as is, where is, without any warranty. Itsdpfxozrm I Ns Aaxjk Delivery: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, From a closed paper manufacturer Type: 007.30055 Serial number: 1C 231 01 Iedpfjyff A Hex Aaxjtk Measuring span: 365 mm Application range: 520 mm LCD screen Resolution 0.001/0.005 mm