Used Theimer Belichter / Exposer for sale (47)

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Cgedpfxoygxi Ne Ahvew Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Codpfx Aexhduxohvsgw Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: good (used), Year of construction: 1995, FINIX 500 is a finishing system flexo photopolymer plates up to 500 x 800 mm (about 19 "x 31"). This finishing unit has the exposure section with ultraviolet lamps and sliding tray is entirely made of stainless steel, which is produced after posteksponirovanie normal processing, including preliminary exposure, exposure, washing and drying, are usually performed FLEXO apparatus 3 or 5. When the normal process is completed, fleksoplastina usually dry to the touch, but sticky and you must give it rigidity posteksponirovaniem. FINIX 500 eliminates the tackiness while giving the plate rigidity and making it durable and resistant to abrasion and mechanical stress by exposing respective light sources. Exposure is carried out two types of lamps emitting ultraviolet radiation with different spectrum, each of which produces a certain effect on the wafer. Special germicidal lamps eliminate tackiness, and UV lamps complete posteksponirovanie plate, making it harder. The exposure time for each type of lamp can be set independently of each other, enabling the simultaneous or separate exhibition with different duration. Each type of light is controlled by its own control panel with digital display. FINIX also presented a model 120 plates measuring 35 "x 47" (900 x 1200 mm). UV lamps bactericidal lamps FX 14x30 w 2x20 lamp cooling system posteksponirovaniya timer digitale Timer finisher digitale exhaust system Power 380V, 3 phase, 50 Hz Cgodpfx Aecwi Tfjhvow dimensions 108 x 92 x 42 (H) cm net weight 130kg

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 17 h, ✅ New & in stock ✅ Carbide teeth ✅ 420 cc ✅ 230 mm ✅ Shipping available Powerful shredder in top condition for sale! The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 SCHORR TREE STUMP GRINDER RR150BSF Clear your garden of annoying tree stumps – quickly, efficiently, and effortlessly with our powerful tree stump grinder. The simple and clean solution for a well-maintained and beautiful property! -- 420cc gasoline engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- Highly user-friendly -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF tree stump grinder features 8 carbide milling teeth, which are ideal for particularly demanding tasks. The grinder enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our grinder eliminates the need for laborious rework. This saves both time and money on projects large and small. Cgjdpfswh Rnnox Ahvew POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine produces 12.4 hp and delivers sufficient power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers consistent power delivery. EASY TO USE With ergonomically designed controls and intuitive operation, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the grinder can be easily transported to its destination. The parking brake also makes it easier to operate the grinder during work. HUGE TIME SAVINGS By using the grinder, you save a significant amount of time and effort compared to conventional removal methods (exposing the root, cutting through the root, loosening the stump, and removing the stump) – all with just a spade. For a tree stump with a diameter of 30 cm, someone with the appropriate experience and physical strength might need 4 to 8 hours; with the grinder, the job can be completed effortlessly in 30 to 180 minutes. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. cutting depth / cutting height: -2300 mm / +2540 mm Max. rotation speed: 2500 rpm Weight: 113 kg Basic Dimensions Overall Length: 1710 mm Overall Width: 750 mm Overall Height: 1160 mm Cutting Tooth Dimensions L x W x H: 108 mm x 71 mm x 38 mm Engine Displacement: 420 cc Maximum Power: 9.1 kW / 12.4 hp Starter: Recoil Our competent team is happy to answer any questions you may have about the SCHORR RR150BSF Tree Stump Grinder. We look forward to hearing from you and providing advice. Do you find the purchase price of a tree stump grinder too high? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, please contact us:

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Carbide teeth ✅ 420 ccm ✅ 230mm ✅ Shipping possible SCHORR STUMP GRINDER RR150BSF Clear your garden of unwanted tree stumps - quickly, efficiently and effortlessly with our powerful stump grinder. The simple and clean solution for a well-kept and beautiful property! -- 420cc petrol engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- High user-friendliness -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD Cjdst Ivnwepfx Ahvogw The RR150BSF stump grinder has 8 carbide cutting teeth, which are ideally suited for particularly demanding tasks. The cutter enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our cutter means no more tedious reworking. This saves both time and money on large and small projects. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine delivers 12.4 hp and provides enough power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers constant power output. SIMPLE OPERATION With ergonomically designed controls and intuitive controls, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the stump grinder can be easily transported to its destination. The parking brake also makes it easier to operate the tiller during work. ENORMOUS TIME SAVING Compared to conventional removal methods (exposing the root, cutting the root, loosening the stump, removing the stump), using the cutter - and all with just a spade - saves you an enormous amount of time and energy. For a tree stump with a diameter of 30 cm, people with the appropriate experience and physical strength may need 4 to 8 hours; with the cutter, the work is easily done in 30 to 180 minutes. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. Milling depth / milling height: -2300mm / +2540mm Max. Max. rotation speed: 2500 rpm Own weight: 113kg Basic dimensions Overall length: 1710mm Overall width: 750mm Total height: 1160mm Cutting tooth dimensions L x W x H: 108mm x 71mm x 38mm motor Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR BAUMSTUMPFFRÄSE RR150BSF. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a stump grinder too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us:

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidelberg Suprasetter A74/52 Automatic plate loader (100 plates) Year of manufacture: 2007 Cedpfx Ahex Upc Rsvogw Laser hours: 3,587 Exposed plates: 79,573 Max plate size: 676 x 760 mm Bacher punching system Excellent condition Stacker advand 26

Year of construction: 2010, condition: like new (used), Heidelberg Suprasetter 52A -Year of manufacture: 2010 -Laser head: GEN III -Bacher punching system -10,300 exposed plates -Prinect RIP software installed on PC -Developing unit -Stacker advand 28 Codpfx Aeirmmdshvogw

Condition: like new (used), functionality: fully functional, first registration: 10/2024, fuel type: diesel, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, airbag, central locking, onboard computer, traction control, PEUGEOT BOXER 33 2.2 BLUEHDI 140 HP L2 H2 - PM TM - PANEL VAN EURO 6E PAYLOAD: 1,200 KG AIR CONDITIONING BLUETOOTH RADIO MULTIFUNCTION STEERING WHEEL REVERSE CAMERA MANUFACTURER’S WARRANTY UNTIL 10.2026 + 2 YEARS WARRANTY EXTENSION VAT EXPOSED: €20,450.00 + 22% VAT = €24,950.00 VAT INCLUDED Cgedpfsy It Epox Ahvow LEASING AND TAILORED FINANCING OPTIONS AVAILABLE ALSO WITHOUT DOWN PAYMENT, WITH FLEXIBLE INSTALLMENTS AND FINAL LUMP SUM PAYMENT UP TO 96 MONTHS TRADE-INS AND VEHICLE SCRAPPAGE ACCEPTED Mileage CERTIFIED both on the contract and the invoice. Despite our best efforts to accurately list all vehicle features, there may be some discrepancies between the specified accessories and/or the photos. We therefore invite you to verify the details with one of our consultants, who will be available for any additional information.

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Codpjdad Adofx Ahvogw Only shipping is possible Delivery every week Price excl. shipping We provide invoices with 0% of tax.

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFCE358305679711, mileage: 200 km, first registration: 01/2025, fuel type: diesel, tire condition: 100 %, next inspection (TÜV): 01/2029, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, airbag, IVECO DAILY 35C12 V 4100 H3 Quad-Tor RG - EURO 6E National vehicle – VAT exposed Vehicle length: 7.283 m Payload: 877 kg Leasing and tailor-made financing available Possible also with zero down payment, with small monthly installments and a large final balloon payment Trade-in and scrappage options available Price: €29,500.00 + VAT 22% = €35,990.00 VAT Included Mileage CERTIFIED both on the contract and on the invoice. Despite our efforts to list all characteristics of the offered vehicle, some discrepancies in accessories and/or photos may occur. We invite you to verify the details with one of our consultants, who will be at your disposal for any additional information. JollyAuto - Multibrand dealership since 1984 - Passenger cars and commercial vehicles of all brands Cgsdpjyctnljfx Ahvsw - Authorised DFSK – EMC – FOTON dealer - New, nearly new, company fleet, guaranteed used vehicles - APPRAISAL and TRADE-IN of your used vehicle

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640.-0.8 is a sensational machine for precision bending of all types of metal sheets (steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. Cgjdpjc Nwd Asfx Ahvow

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Cgodpsxa Hzxjfx Ahvow Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher Csdpfx Ahezha Hqjvogw • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, color: other, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance Cgedpfx Ahezhaxmevjw -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. Cedpfxeg A Rhkj Ahvsgw • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Cgodpfxexxh Tao Ahvew Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. Codpfxoxnlwzo Ahvegw IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: like new (used), functionality: fully functional, mileage: 108,000 km, first registration: 03/2022, maximum load weight: 962 kg, next inspection (TÜV): 03/2026, fuel: diesel, color: white, number of seats: 3, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, fog lights, onboard computer, rear view camera, start-stop system, traction control, FIAT DUCATO VAN 30 CH1 - 2.2 MJET3 120 HP - EURO 6D COMPANY VEHICLE – ONE OWNER – FULL SERVICE HISTORY PAYLOAD: 962 KG AIR CONDITIONING TOUCH SCREEN RADIO BLUETOOTH REAR VIEW CAMERA MULTIFUNCTION STEERING WHEEL VAT EXPOSED €14,900.00 + 22% VAT = €18,178.00 VAT INCLUDED 24-MONTH WARRANTY TAILORED FINANCING AVAILABLE ALSO WITHOUT DOWN PAYMENT, WITH FLEXIBLE INSTALLMENTS AND FINAL BALLOON PAYMENT TRADE-INS AND VEHICLE SCRAPPAGE POSSIBLE MILEAGE CERTIFIED ON BOTH CONTRACT AND INVOICE. Although we strive to accurately describe all vehicle features, discrepancies in listed equipment and/or photos may occur. We invite you to verify all details with one of our consultants, who are at your disposal for any additional information. Csdpfx Ajykk D Tshvjgw

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Machine set includes: • Imager (Exposing unit) • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cgodsyrr I Aopfx Ahvew Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: Csdjwhu Hhspfx Ahvjgw working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. Codpfjvkf Agox Ahvjgw The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, paper width (min.): 508 mm, paper width (max.): 1,270 mm, Polielettronica LaserLab 127cm 50" Digital Lab Photography The word compromise does not exist at Polielettronica, the maximum in terms of quality and productivity are the only possible targets. Just for this the LaserLab is equipped with a solid state RGB laser unit, it is the only exposure system which allows the maximum in term of colour depth, colour separation, tone continuity and maximum details in the Highlights and Shadows. The Polielettronica 16bit/colour graphic processor guarantees the complete transfer of information from image to paper. The Laser alignment system and the optical transfer, through a single fiber optic developed at Polielettronica, guarantees the maximum quality of each of the 1,393,545,600 pixels (1,3GB) needed to expose a 127x254cm. All this in 60 seconds! The paper is cut and positioned into the drum. The exposure unit starts to move on the air cushion and the mirror rotates to reflect every point on the paper. The laser unit converts the image data coming from the computer into a laser beam, then transfers it to the drum via fiber optic. The exposed paper is delivered to the paper processor, at the same time a new exposure begins from point 1. Resolution: 305/254dpi Exposes at maximum size in 60 seconds! Specifications: Cgedpfx Aoyn Rf Sehvow Exposure Section Laser: R - G - B Solid State Definition: 305/254dpi Calibration and Exposure Data Processing: 16 bit/colour Optional: up to 1016dpi Drum Exposure System: guarantees maximum quality for each pixel (focus - overlapping - shape) on all exposed surface. Pure Black & White Kit: On request. Print size: From 508x508mm to 1270x2540mm, From 20x20" to 50x100" Paper Widths:Any from 508mm (20") to 1270mm (50") Productivity: Size: 127x250cm (50x100") Width: 1270mm (30") prints/hour: 18 Large Size, Great Handling: The paper box remains at ground level and is easy to load; if it`s necessary to work on medium format, both the 50 and 76cm boxes can be used (available as optionals). They are the same boxes used on the LaserLab 50 and 76, light and easy to handle. Machine used, but well maintenance over the time so it is precise. All the transportation's cost and customs will be managed by the buyer