Used Thermacut Ex Trafire 30H for sale (6,227)

Condition: used, Used Eiger model 5L SSE EXD stainless steel bead mill. Stainless steel chamber measures approximately 360mm x 200mm diameter. Unit is driven by 10hp, 420volt, 3/50 electric motor. Includes local controls. Credjz Ah Skspfx Apboh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Credpfx Ajyvfhdepbjh Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: excellent (used), functionality: fully functional, total length: 150 mm, total width: 110 mm, total height: 120 mm, overall weight: 1,200 kg, input voltage: 400 V, input current: 39 A, Kilia 65 L cutter with outfeed arm in very good condition, with 2-speed bowl and knife axle. The machine is also equipped with reverse for mixing products. Cedpfx Apjz I Db Nsbjrh

Condition: good (used), functionality: fully functional, For Sale: Takisawa EX-110 CNC Lathe + LNS Bar Feeder, Year 2004 A Japanese-made Takisawa EX-110 CNC lathe in good condition, equipped with an LNS bar feeder. Specifications: - Control: Fanuc 21i-TB - Max turning diameter: 400 mm - Max swing over bed: 495 mm - Max turning length: 710 mm - Bar capacity: 75 mm - Spindle speed: 30–3,500 rpm - Spindle power: 18.5 kW - Turret positions: 12 - Chuck size: 250 mm (A2-8") Crodpfxoyrgggs Apboh - Rapid traverse X/Z: 16/20 m/min - Weight: approx. 5,000 kg Included equipment: LNS bar feeder, tailstock, chip conveyor, tool setter, coolant system. Further information and pricing upon request. 📞

Condition: used, Automatic filling line for EX-type products, i.e., products filled in a potentially explosive hazard zone 2. These devices are used for products of the following types: - detergents, - cleaning agents, - solvents, - windshield washer fluids, - various types of liquid chemical raw materials, - plasticizers and other process liquids, - fuels and oils, - other liquid petrochemical products – provided that the materials are compatible and the EX design is appropriate. The filling system consists of several components: - ROBAK volumetric filler, type: ANO-750, with Endress+Hauser DOSIMASS flowmeter fillers, EEx standard – this is a Coriolis flowmeter that can directly measure mass flow, as well as density and temperature, and based on this, volumetric flow. - ROBAK single-head capping machine, type: ZR-02, EX standard, currently in a format for 1 L bottles with a safety cap for hazardous products. - ROBAK cap feeder, type: MPZ-03 Crsdjzu Rqtepfx Apbeh - Control cabinet Option for filling bottles or canisters. System capacity: 500 - 2,000 bottles per hour. Complete documentation for the machines. Option to order conveyor belts in EX standard. Used machines, regularly serviced.

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Crjdsz Ek S Aspfx Apbeh Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Year of construction: 2021, Pladdet PRG1-70-EX Sorting Grab | Quick-Coupler Mount | 70 Liters | 2021 | As New For sale is a hydraulic Pladdet sorting grab, model PRG1-70-EX. Equipped with a quick-coupler mount for attachment to an excavator. The grab is in as-new condition. Technical data: Manufacturer: Pladdet. Model: PRG1-70-EX. Year of manufacture: 2021. Serial number: PSG0100338. Capacity: 70 liters. Weight: 167 kg. Condition: as new. Hydraulic opening and closing. No rotation function. Quick-coupler mount. Hydraulic hoses and couplings included. CE marking. Inspection valid until 2027. Quick-coupler mount. Cjdpfx Apoz E Nkwebsrh Manufacturer: LSB Stahlbau Oschersleben. Suitable for: Terex TC48. Year of manufacture: 07-2026. Manufacturer number: 260621. = Further information = Year of manufacture: 2021 Suitable for: Construction machinery Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Codezf Hn Ajpfx Apborh Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set Credpfey Rnbdsx Apbsh 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 13764x, Equipment: documentation/manual, CNC lathe in very good condition, available for demonstration in production, complete with extensive accessories. Last inspection: 2026 Crjdpfxjzx Aqgo Apbsh Release date: available on short notice.

Year of construction: 2008, condition: used, X-axis: 330mm, Z-axis: 1650mm, max. swing over bed: 910mm, swing over cross slide: 560mm, distance between centers: 1820mm, standard turning diameter: 450mm, max. turning diameter: 610mm, max. turning length: 1650mm, bar capacity: 184mm, spindle speed: 12-1200rpm, spindle nose: A2-15, spindle bore: 200mm, spindle bearing diameter: 266mm, turret type: T10, square tool height: 32mm, boring bar holder diameter: 65mm, tailstock travel: 1400mm, quill stroke: 200mm, tailstock taper: MT5, tailstock quill diameter: 160mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, jog feed X-axis: 0-1260mm/min, jog feed Z-axis: 0-1260mm/min, spindle motor power: 30/37kW, X-axis servo motor: 4kW, Z-axis servo motor: 7kW, hydraulic pump: 2.2kW, lubrication pump: 0.004kW, coolant pump: 1.1kW, connected load: 52kW, coolant tank capacity: 300l, hydraulic tank capacity: 83l, lubricating oil tank capacity: 4l, length: 4740mm, width: 2130mm, height: 2090mm, weight: 11t, with documentation. The machine was commissioned in 2008 and operated in single-shift production only, it is currently no longer in operation and has been idle for approx. 2-3 years. An on-site inspection is possible. Csdpfszz Iruox Apberh

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Crjdpfx Apez H A Nijbeh Nut- und Perforationsmaschine / Creasing and Perforation machine Foellmer EX Serial-No. 156 Arbeitsbreite / Working width max. 450mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Cjdpfx Apoq A I Aajbjrh Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable Crodjyrd U Uepfx Apbjh - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Cjdpfxeyk Tbhj Apberh Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Codpfx Apexrnr Nsborh Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Cedpfxsylhmus Apborh Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Codpfx Apoyk Uimjborh Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPT96916, mileage: 769 km, power: 367.75 kW (500.00 HP), first registration: 12/2024, fuel type: diesel, empty load weight: 8,732 kg, maximum load weight: 10,268 kg, overall weight: 19,000 kg, tire size: 385/65 R22.5 Vooraan - 315/80 R 22.5 Achteraan, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, CO₂ emissions: 53 g/km, fuel tank capacity: 1,050 l, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,915 mm, total width: 2,540 mm, total height: 3,925 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,600 kg, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, trailer coupling, We offer a rental plan with a minimum term of 36 months, ensuring long-term stability and continuity. The monthly rental price is €2,000, excluding VAT, providing a transparent and clear cost structure. - An initial deposit of €10,000 is required. This provides both parties with the necessary security and forms a solid basis for a smooth collaboration. - Codpfxjyayngs Apborh In addition, a maintenance contract is included, so you don't have to worry about service or additional costs. You will benefit from a hassle-free and professional solution, where quality and reliability are paramount. - Hydraulic walking floor installation with swivel arm - Rema connector - Light bar - Spotlights - Work lights - Chassis cover - Rotating beacons - Air horns - Storage box - Rubber floor mats

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT Csdeyluviopfx Apberh 2 pcs. tool turrets A turret: 12 tool positions (all driven) B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2005, total length: 9,060 mm, total width: 2,520 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Attractive 2005 Van Hool 20FT tipping chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axles, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,200 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tires (L: 8/8/7 mm; R: 8/7/6 mm), Dutch registration. = Further information = Axle configuration Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 45% Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9,000 kg; Tire tread left: 45%; Tire tread right: 40% Weights Unladen weight: 5,200 kg Payload: 33,800 kg Gross vehicle weight: 39,000 kg Cedpsy H Hd Ajfx Apberh Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-68-VY Further information Please contact Arne Honingh for more information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2000, loading space width: 40 mm, total length: 9,400 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2000, Equipment: ABS, = Additional options and equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Drum brakes = Notes = 2000 Van Hool 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT), ABS/EBS, SAF axles with drum brakes, 1st axle is a lift axle, 385/65-R22.5 tires (L: 4/13/8mm; R: 6/14/7mm), unladen weight 3,950 kg, max. gross weight: 39,000 kg, Dutch registration. = Further information = General Information Mileage: 228,518 km Registration number: OG-37-KJ Axle configuration Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 25%; Tyre tread right: 40% Rear axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 90% Rear axle 3: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Weights Unladen weight: 3,950 kg Payload: 35,050 kg Gross weight: 39,000 kg Functionality Body brand: Van Hool 3B2015 Condition General condition: average Technical condition: average Visual appearance: average Further information Please contact Arne Honingh for more information. Crjdpfx Aez Dbg Ujpbeh

Condition: used, maximum load weight: 29,352 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 102 m³, Equipment: ABS, VEHICLE NUMBER: 2814 EXTERIOR EQUIPMENT: * Galvanized frame * Sliding tarpaulin, neutral, without lettering/stickers * Additional tarpaulin tensioner at the front * Steel corner supports at the front and rear * Sliding roof Schmitz Safety Roof (Edscha) * Lifting roof with stanchion lifter * Body with adjustable height at the front: 7 x 50mm / at the rear: 4 x 50mm * Ferry equipment for solo/unaccompanied transport * Reinforced HD frame at the front * Underrun protection, bolted, FERRY type with sliding skid * Trailer information system Smart-Board with axle load display * Tarpaulin rope * Steel rear impact guard * Document box TECHNICAL FEATURES: * Rotos axles with disc brakes * Air suspension with anti-roll bar on the first axle * Tires 435/50 19.5 * Tread depth in mm: 1st axle: 11/11, 2nd axle: 8/8, 3rd axle: 7/7 * Lashing points in the outer frame * Lashing eyes: 7 pairs of 2 tons and 11 pairs of 5 tons * Pallet stop on both sides Credpfx Apewibi Ssbjh * Certificate for load securing EN 12642 Code XL, Daimler 9.5, beverages * Reinforced cargo floor * EX/II approval * Unladen weight 6,648 kg * Fifth wheel height 925mm * TÜV/MOT: 12/25, Next inspection: * Example lease-purchase: €279 per month, term 36 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location possible. Trade-in/Leasing/Financing. We can make it happen!

Condition: used, mileage: 407,186 km, first registration: 11/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 7,900 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 6,050 mm, loading space width: 2,390 mm, loading space height: 2,350 mm, Equipment: ABS, tail-lift, ????? Fixed price ???? M.A.N 7.150 BL box van with tail lift for self-renovation into a motorhome First registration: November 24, 2011 407,186 kilometers (last oil change at 393,642 kilometers) Euro 5 ABS Radio CD 6-speed manual transmission Cruise control Rearview camera 2 seats (3 registered) Roof hatch Sun visor Electric windows Electrically heated exterior mirrors Air-suspended rear axle with lift and lower function Tires 225 / 75 R 17.5 M&S Box van by Junge, approx. 6050 x 2390 x 2350 mm Partially insulated Tail lift MBB / Palfinger Load capacity 1000 kg Platform length approx. 1800 mm Valid TÜV inspection until 02/2027 The vehicle was used as a motorhome, but is still registered as a truck (can be changed without much effort) Most of the equipment has been installed in another vehicle (see pictures). There are sliding rails in the rear, so the interior can be moved forward, creating space at the rear to transport 2 motorcycles or similar. Credpfx Apozb T H Ssbeh Solar panels were installed on the roof of the box van. New intercooler, steering gear, front brakes with discs installed at 377,809 kilometers. VAT is calculated according to § 25a.

Condition: used, Year of construction: 2019, connected load frequency / V weight / kg range L-W-H / mm Condition: As good as new Type: Drum turner SV-Ex Credeypwd Dopfx Apbeh Item no.: 147724 Year of construction: 2019 Load capacity: 300kg