Used Tire Recycling / Shredding System for sale (40,186)

Condition: not inspected (used), Year of construction: 2005, Scraper conveyor: 5m Width: 0,55 m Height: 0,5m Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Csdsd H Twispfx Ac Nerb Drop height: 2,5m with swivelling slewing ring without engine

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Cedpfoxuqv Nox Ac Njrb Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Csdpfxsxy Rddj Ac Norb Available immediately

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 400 mm, conveyor belt speed: 4,000 mm/s, total width: 1,060 mm, total height: 1,800 mm, overall weight: 350 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 10 A, Equipment: documentation/manual, emergency stop, Inside width: 400 mm Length: 2000 mm Codjxuq Dgepfx Ac Norb Driving power: 3 kW Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Crsdpjxy N Dpjfx Ac Neb

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Crjdpfxexy E H He Ac Njb Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Codpfoxy Idhex Ac Nerb Available immediately

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 900 mm, conveyor belt speed: 4,000 mm/s, total width: 1,560 mm, total height: 2,500 mm, overall weight: 700 kg, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, emergency stop, Inside width: 430 mm Inside depth: 550 mm Length: 7300 mm Driving power: 15 kW Cedpofhxagjfx Ac Nsrb Driving Speed: 38 1/min Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Cjdpfsxy Hbxsx Ac Nerb Machnie weight: 51 to Place: Austria Available immediately

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 RMVI-3030-1-014 RMVI-3030-1-013 Codpfx Acsxy Imie Norb RMVI-3030-1-012 RMVI-3030-1-011 MR-2002-4-27

Condition: repair required (used), Year of construction: 2000, operating hours: 10 h, functionality: not functional, Place: Austria Csdpfexy I I Tex Ac Nsrb Available immediately

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Codpfexy Nkpsx Ac Nerb Available immediately

Condition: refurbished (used), Force pressing cylinder: 2 x 1100 kN Capactiy cars: 30 -40 p/h Bale dimensions: 3,9 x 1,9 x 0,4 m x m Loading height: 1,32 m Cycle time: 60 s Crsdpfx Ashgibhsc Nsb Power: 22 kW Weight: 22 t Dimensions: 7,5 x 2,8 x 3,0 Manual operation Mobile unit

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Cedpfx Aelhqd Rsc Njrb Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Cjdpfx Aoxy E Evoc Njrb Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb Codpfexy E Siox Ac Nsrb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Available immediately Codpfoxy Iikex Ac Norb

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 Crsdpfxoxy I D Uo Ac Nsb etc.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Further options and accessories = - EBS = Remarks = Number of axles: 3, tare weight: 8,070 kg, gross weight: 43,000 kg, chassis type: full chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year: 2021, axle type: SAF, MEGA DOUBLE-DECK // HARDWOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further information = General Information Cab type: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; left tyre tread: 6 mm; right tyre tread: 4 mm Axle 2: left tyre tread: 12 mm; right tyre tread: 11 mm Axle 3: left tyre tread: 4 mm; right tyre tread: 4 mm Weights Unladen weight: 8,070 kg Payload capacity: 34,930 kg Gross vehicle weight: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating stock • Recognizable quality • Competitive pricing • Reliable business practices • Multilingual service • We understand our customers Crjdpfxey Irnvs Ac Nsb • Support with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of 'recognizable quality' • And more ... Please visit our website for special offers and the complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Crsdpsvf E Avjfx Ac Nob Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Crodpfxeviwdme Ac Nsb Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Credpfxsy Ex Uqj Ac Neb Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Crsdpfx Ajy Dtyrjc Nob

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. Csdpfx Aswm Nq Ejc Njrb • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2016, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,540 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,210 mm, color: white, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 8.830 kg Carrying capacity: 33.170 kg GVW: 42.000 kg Functional Make of bodywork: VeDeCar Carrosserie Carrier Vector 1550 Cooling engine: diesel and electric (4432 operating hours diesel; 2039 electric) Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 09/2026 Technical condition: good Visual appearance: good Crodpfxjy It D Se Ac Nsb Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL