Used Tsugami Hs207-5Ax for sale (112)

Condition: good (used), Year of construction: 2003, Tsguami BS18DE(S)-III CNC automatic lathe Good condition Incoterms EXW CH-4528 Zuchwil Fpsdpfxoq E Ra Ss Aaysl The complete photo gallery and the technical data can be found in the attached catalog. No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2001, Tsugami BS12-III CNC sliding headstock automatic lathe TECHNICAL DATA turning diameter: 3-12 mm Turning length: 170 mm Fodpjq H Ea Uefx Aayjpl Max. Bore diameter: 7 mm Max. Internal thread diameter: M6 Speed: 12`000 rpm Speed, counter spindle: 6`000 rpm Number of axes: 6 Dimensions: approx. 190 x 130 x 220 mm Weight: 2200 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h Fpedpfx Aajzfiipeyjl EQUIPMENT Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) Fpjdsidqvcjpfx Aayel X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC PRECISION AUTOMATIC LATHE • 32mm capacity chucker convertible Swissturn • 3-path control with pinch turning and milling capability • Main side gang with 7 turning tools, 7 driven tools (3 modular), and 5 ID tool positions • Sub side Y-axis with driven tool positions (4 standard), up to 34 total tools available • Oscillation cutting capability • Direct drive guide bushing tsugamiamerica.com • FANUC 31i-B CNC control Fpjdpey Aygcefx Aayol

Condition: excellent (used), Year of construction: 2022, Maximum machining capacity: 20 mm (Swiss-type / sliding headstock) 8 backworking live tools (4 standard) Direct drive rotary guide bushing Fedpfxoy A Epie Aayopl High-rigidity machine bed for improved stability and accuracy Oscillation cutting capability Advanced direct drive guide bushing system CNC control system: FANUC 32i-B

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Fedpfxszzax To Aayopl Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz • Rated power: 40,61 kVA • Transformer capacity: 5 kVA • Full-load current: 64,67 A Fodpfx Aaozxy Ivsyjpl • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 650 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 10,500 kg, Equipment: CE marking, documentation/manual, The LAGUN L 5AX 410 5-axis simultaneous machining center with a cross table design stands for the highest precision, robust construction, and economical production. It is ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical equipment: Fodpfohy Artsx Aayjpl Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated belt chip conveyor ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare an individual offer.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, The LAGUN L 5AX 500 5-axis simultaneous machining center, featuring a cross table design, stands for highest precision, robust construction, and economical production. It is ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Fjdefdxhaopfx Aayepl Technical features: Control: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated band chip conveyor ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and create an individual offer.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 450 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 495 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, controller model: TNC 640, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotary table diameter: 320 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L5AX 320 – available for immediate delivery The LAGUN L 5AX 320 5-axis simultaneous machining center with a cross table design stands for the highest precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 640 ✔ HEIDENHAIN TFT screen 15" Fpsdsh Ekqyspfx Aayjl ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated belt chip conveyor ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and create an individual offer.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,330 mm, table load: 400 kg, overall weight: 11,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, tool weight: 6,500 g, number of axes: 5, This 5-axis KOVOSVIT MAS MCV 1000 Speed 5AX was manufactured in 2011. It features a spindle speed range of 20-12,000 rpm and a spindle drive power of 33/45 kW. The machine can handle a maximum tool weight of 6.5 kg and includes a 30-tool magazine. With a table load capacity of 400 kg and dimensions of 5145 x 3665 x 3330mm, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 1000 Speed 5AX machine we have for sale. Contact us for more information. Additional equipment • Including full tooling Machine Benefits Technical Machine Benefits • Feed range (x, y, z): 1 - 15000 mm/min • Table clamping surface: Ø 520 mm • C-axis rotation: 360° • A-axis tilt: ± 110° • Max. Table speed: 20 rpm • Max. Torque (s1/s6): 157/215 nm • Total power input: 55 kva Fpedpfx Aaozvv D Ijyel Extra Information Machine still under powerMachine spindle hours are below 9000h. The machine was used mainly in tool mold making and small-batch custom production. It was continuously maintained and serviced as needed. Dimensions Machine Depth 5145 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,377 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 3,108 mm, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, tool weight: 7,000 g, product length (max.): 4,210 mm, swivel angle B-axis (min.): 110 °, swivel angle B-axis (max.): -49 °, number of axes: 5, This 5-axis KAFO KFO 620 5AX was manufactured in 2019. It features a spindle speed of 12,000 rpm, a tool changer with a capacity of 40 tools, and a spindle taper SK 40. The machine dimensions are 4210x2325x3108 mm, and it weighs 9500 kg. It includes a chip conveyor, spindle oil cooler, and is CE compliant. If you are looking to get high-quality milling capabilities consider the KAFO KFO 620 5AX machine we have for sale. Contact us for more information. Additional equipment • CE compliant • Kinematics HH • Linear scales in X/Y/Z • Blum probe for workpiece measurement Fsdpfozvvmcjx Aayspl • Spindle expansion compensation • Handwheel • Water gun • Working area flushing • Spindle oil cooler • Oil skimmer Machine Benefits Technical Machine Benefits • B-axis: 110 to -50 degrees • C-axis: 0. 001 degrees • Distance from spindle to table: 160-600 mm • Spindle bearing: 70 mm • Tool changer capacity: 40 tools Extra Information Machine still under power Dimensions Machine Depth 4210 mm Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm Fpsdpfx Ajzt Rwqsayel • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: ready for operation (used), Year of construction: 2025, operating hours: 58 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, total height: 2,900 mm, total width: 2,650 mm, table width: 398 mm, table length: 398 mm, table load: 300 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, tool weight: 8,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,900 mm, number of axes: 5, This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 640 HSCI • A-Axis Travel: +105° / -120° • C-Axis Travel: ±360° • Table Diameter: 398 mm • Maximum Spindle Speed: 12000 rpm • Tool Magazine Capacity: 40 tools • Rapid Feed X/Y: 25 m/min • Rapid Feed Z: 20 m/min • A-Axis Max. Speed: 25 rpm • C-Axis Max. Speed: 25 rpm • A-Axis Positioning Accuracy: ±5 arcsec • C-Axis Positioning Accuracy: ±5 arcsec Fpedpfx Aaszphg Isyol • A-Axis Torque: 700 Nm • C-Axis Torque: 450 Nm • Control: HEIDENHAIN Conversational / DIN-ISO Programming • Machine Configuration: CNC Swivel Rotary Table (A/C Axis) • Spindle Cooling: Liquid Cooled Motor Spindle • Operating Hours (Program Run): 58 h Accessories: • 19" Touchscreen • HEIDENHAIN HR 510 FS Electronic Handwheel • Automatic Tool Changer • External Coolant System • Internal Coolant Through Spindle (Optional) • HEIDENHAIN TS460 Probe Preparation • TT460 Tool Measurement Preparation • SE661 Probe Receiver Extra Information • Showroom Machine • 12-Month Warranty • Retrofitting and Commissioning Available on Request (Additional Cost) Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Fpodpfozavyfox Aayel

Condition: ready for operation (used), Year of construction: 2002, operating hours: 400 h, travel distance X-axis: 1,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: 16iMA, total height: 3,950 mm, table load: 1,000 kg, overall weight: 15,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, product length (max.): 9,500 mm, number of axes: 3, This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information. • Condition: Completely overhauled in 2016; excellent technical condition, minimal use since Fpedpfx Aex D D I Djayel • Documentation: Full paper record of all overhaul interventions and replaced parts • Spindle hours: ~400 total (≈200 h test running,

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Fedoy St Sdspfx Aayjpl Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of axes: 5, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, table length: 500 mm, table width: 500 mm, Equipment: CE marking, LAGUN L 5AX-500 5-axis simultaneous machining center – available immediately The LAGUN L 5AX 500 machining center stands for high precision, robust design, and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: Fpjdpfx Aofdxkhjayjl ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and long-lasting machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 16" TFT screen HEIDENHAIN motors, scales, and electronic handwheel HR 510 Chip disposal: Chip conveyor Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positional accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, controller model: Sinmerik One, workpiece height (max.): 500 mm, workpiece diameter (max.): 675 mm, workpiece weight (max.): 500 kg, total height: 3,610 mm, total length: 3,970 mm, total width: 3,523 mm, table load: 500 kg, rotary table diameter: 600 mm, rotational speed (max.): 14,000 rpm, overall weight: 11,800 kg, spindle speed (max.): 14,000 rpm, coolant supply: 15 bar, distance table to spindle center: 175 mm, distance table center to spindle nose: 400 mm, spindle motor power: 37,000 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, HWACHEON D2-5AX Anniversary Model – The intelligent entry point into 5-axis machining The new HWACHEON D2-5AX was specifically developed to enable companies to make an economical and simultaneously high-performance entry into modern 5-axis machining. As the official anniversary model from HWACHEON, it combines the highest manufacturing quality, modern control technology and maximum flexibility for a wide range of applications. Whether it's single-part production, toolmaking, prototype construction or automated series production – the D2-5AX impresses with its high precision, reliable processes and compact design, while still offering a generous working area. With travel distances of 650 x 500 x 500 mm and a powerful rotary table with a diameter of 600 mm, complex HWACHEON D2-5AX 5-axis machining centers can be accommodated. New machine with state-of-the-art HWACHEON technology The HWACHEON D2-5AX is a compact and powerful 5-axis machining center for modern manufacturing requirements. It is a new machine that impresses with its precision, stability and economy. 5-axis machining allows complex workpieces to be manufactured in a single setup. This reduces setup times, improves accuracy and increases productivity sustainably. The standard equipment includes an automatic BLUM tool measurement ZX Speed and a BLUM workpiece measurement system. This minimizes setup times and ensures a high level of process reliability. Technical highlights • Travel distances X/Y/Z: 650 / 500 / 500 mm • Rotary table Ø 600 mm • Powerful 37 kW main spindle drive • 30-tool magazine • Automatic tool measurement BLUM ZX Speed • Automatic workpiece measurement BLUM • Compact and stable machine construction • High dynamics and precision • Suitable for single parts, small series and series production • Optimized for modern manufacturing requirements Control options The HWACHEON D2-5AX is available with: • Siemens Sinumerik ONE for maximum networking and digitization • Fanuc 31i-B5+ for high reliability and comfortable operation in 5-axis mode • Also available as an economical Fanuc 4+1-axis version as an option Your advantages • New machine with state-of-the-art HWACHEON technology • Economical entry into 5-axis machining • Complete machining of complex workpieces in a single setup • Reduced setup times and increased productivity • High manufacturing quality and process reliability Fsdpfozaql Nsx Aayjpl • Future-proof control technology • Ideal for training centers, toolmaking, contract manufacturers and production companies The HWACHEON D2-5AX offers a strong combination of precision, performance and economy. This makes it the ideal solution for companies that want to make their manufacturing more efficient, more precise and more future-proof. Further information, technical data and individual equipment options are available upon request. Contact: Benjamin Hoffmann ACROLOC Werkzeugmaschinen GmbH

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Fodpfjyma H Nox Aayepl Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Fedpfx Aaeyxn Hvoyjpl

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Fjdpfx Aasx Hqwgjyopl Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW Fedpfx Aaezg Dgxjyepl • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Fanuc 0i-MD, workpiece length (max.): 400 mm, workpiece width (max.): 355 mm, workpiece weight (max.): 250 kg, total height: 3,120 mm, total length: 2,995 mm, total width: 2,975 mm, rotary table diameter: 350 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 270 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​5-axis vertical machining center with FANUC 0i-MD CNC Fpedex N Tm Njpfx Aayel