Used Uzma Plate Shear for sale (13,342)

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Gedpfx Aovkbrqoaysbt Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" Gbedsy Raitepfx Aayjt - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg Gbodpfx Aasxn Rhrsyot

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch Gbedpfey Raimex Aayjt - Operating instructions (PDF)

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Technical data: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm Gjdsrckh Sepfx Aayobt - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge Gbsdpfx Aaozkvx Ujyot * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table Gbjdpezcqy Sjfx Aayet - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Gjdpfszkty Asx Aaysbt Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) Gbsdpfx Aoxab Rujayet - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: used, Year of construction: 2018, sheet width 4050 mm plate thickness 20 mm distance between columns 4100 mm column daylight 4200 mm no. of strokes 10-20 Hub/min working pressure 250 bar total power requirement 85 kW weight of the machine ca. 43,6 t dimensions of the machine ca. 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gbjdpsyqvchsfx Aayjt If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Gedpfx Asxal Uwsayjbt Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment Gbodpfxjznngxj Aayjt * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 1975, sheet thickness (max.): 4 mm, power: 22.06 kW (29.99 HP), cutting length (max.): 2,500 mm, Old but well-maintained machine Gedsr Nvf Ujpfx Aayjbt

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front Gsdpfjycxgmsx Aayebt - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm Gbodpfxozn Ahdj Aayst no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm Gbedpfxszr Rqnj Aayot from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm 8mm distance between columns . mm Gbsdpfxjq Dta Io Aayjt

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment Gbodpoq R T U Dsfx Aayot - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm Gbsdpjt Ucgajfx Aayjt - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Gsdpsuddh Asfx Aaysbt Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment Gjdjx Ni D Rspfx Aayebt * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Gedjxc Nikjpfx Aaysbt

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm Godpfx Asu Upafeayobt - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Gbsdpfx Aocnxc Roayot Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic High-quality steel cutting blades with a hardness of HRC55-60 Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting Gbedpst Tw Uiefx Aayst - Sheet support - Rear guard with protective grille