Used Valve Base for sale (13,284)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top Dksdpfsx D Rlpsx Aggot • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button Dkedpoyzr Nmsfx Aggot • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Dkodpfxex Uy Rls Agget Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Year of construction: 2025, operating hours: 2,000 h, condition: like new (used), Complete, as-new Subitec LS180 photobioreactor lab system, built and commissioned in 2025 (07/2025), used only in a controlled laboratory environment. A ready-to-run, turn-key platform for microalgae cultivation and process development — not a bare reactor frame, but a full working package: reactor, high-power lighting, gas management, cooling and a modern B&R automation system with touchscreen and secure remote access, all in one compact unit. At its core is a 180 L Flat-Panel Airlift (FPA) reactor in transparent PVC. Internal static mixers and downcomer geometry create gentle, continuous circulation between lit and shaded zones for optimal growth — without any mechanical stirring. Highlights: Superior, proven performance: in-house cultivation has reached growth rates above 5 g/L/day and densities up to 14 g/L with Chlorella vulgaris. Powerful lighting, high-efficiency light path: double-sided dimmable LED (~4,080 W, full 400-780 nm spectrum), ideal for high-density cultivation and for studying versatile light regimes. Easy to run and keep clean: low-shear airlift circulation, transparent panel with no gradual film build-up, intuitive touchscreen operation. Compact footprint vs. bulky tubular systems (approx. 2.6 x 0.8 x 3.2 m). Tailor-made beyond the standard Subitec design: automatic CO2 dosing via a Bürkert control valve and real-time concentration measurement of the outgoing (off-gas) CO2 for carbon-uptake monitoring. Data-ready automation: all key process variables (pH, temperature, CO2 dosing and off-gas uptake) continuously logged on an open B&R platform. Technical data: Reactor: Flat-Panel Airlift (FPA), 180 L, transparent PVC; aluminium frame Dimensions (L x W x H): approx. 2.6 x 0.8 x 3.2 m Year built / commissioned: 2025 / 07/2025 — as-new Temperature range: 5-30 °C; noise < 70 dB(A) Lighting: LED, double-sided, ~4,080 W, 400-780 nm, max. 500 µmol/m²/s per panel, dimmable Automation: B&R X20 PLC (X20CP1685 / X20EM1612), 4 GB eMMC, Profinet, full I/O set HMI: B&R Power Panel T80 12.1" touchscreen Remote access: Tosibox Lock 670 secure router Dkjdpjzluymefx Aggjt CO2 dosing: Bürkert 8741 mass flow controller (0-10 Nl/min, Modbus TCP), pH-based PID control CO2 off-gas: Norsk Analyse GD10P NDIR analyser (0-100 vol-%, CH4-immune) Cooling: two reactor-integrated heat exchangers + dedicated chiller Control cabinet: Rittal (800 x 1200 x 300 mm); Hager main switch, 3-phase RCD & breakers Supply: 3 x 230 VAC / N / PE, 16 A; 24 VDC control Scope of delivery (single working package): 180 L FPA reactor in aluminium frame; double-sided dimmable LED lighting; gas-mixing unit and filtered (0.2 µm) gas supply; Bürkert CO2 mass flow controller; Norsk Analyse off-gas analyser; chiller and integrated cooling; periphery (media/harvest lines, filters, sampling unit); exhaust unit (foam trap + air lock); Rittal cabinet with B&R automation and 12" touchscreen; Tosibox remote access; temperature and pH sensors. Support: operator training included (remote, or on-site by agreement). We can also advise on the best use of Chlorella strains, recommend species that perform well in this reactor, and share relevant cultivation data. Location: Lahti, Finland — viewing by appointment. Price and delivery terms by agreement.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 Dkjdpozvz Tbjfx Aggjt - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. This item can be crated and shipped internationally. Please contact us for a quotation ----- Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. Dsdpfx Asxqq Dxjggokt - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality).

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Dkedpfjzf Hn Aox Aggst Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: used, This listing is for the This listing is for the Epindorf New Brunswick I/O Module The unit is in full working condition and is ready for immediate release The Eppendorf New Brunswick I/O Module is an analog input/output interface module designed to work with Eppendorf’s New Brunswick and bioprocess control systems. It provides a way to connect external sensors, actuators, and control devices to your laboratory process equipment to acquire analog signals and control external hardware. Dkodexwc Hlspfx Aggjt Analog Inputs & Outputs: The module accepts analog signals from external devices (such as sensors measuring temperature, flow, pH, etc.) and can output analog control signals to external actuators (like pumps or valves). Typical signal formats it supports include 0–5 V and 4–20 mA ranges, which are industry standards for process instrumentation OPC Server Interface: It can interface with OPC-compatible software such as Eppendorf’s BioCommand® SCADA for real-time monitoring and advanced control. OPC (OLE for Process Control) is a standard communication protocol that lets control software talk to instrumentation hardware. Process Integration: By connecting to process control systems, it helps in monitoring and controlling bioprocess parameters during fermentation, cell culture, or other controlled experiments How It’s Used Laboratory and bioprocess engineers use this module to: Integrate external sensors and actuators with New Brunswick or BioFlo systems. Capture analog data (such as voltage or current tied to physical parameters). Provide control signals to devices like external pumps or valves based on process logic. Link equipment to process automation software for data logging or control strategies. Eppendorf Typical Features Although detailed manufacturer technical specs are limited in published catalogs, typical features include: Configurable input/output ranges (e.g., 0–5 V and 4–20 mA). Eppendorf Compatibility with OPC communication standards for integration with software like BioCommand. Eppendorf Robust lab design to handle use in controlled environments. QuestPair

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines Dodpfx Aeznkz Ssggokt in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. Dkjdpfx Ajy Exqloggst This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain Dkodpfx Agszxnu Djget

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Dedpfxezb I Spe Aggskt Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21/A186898, power: 141.7 kW (192.66 HP), overall weight: 628 kg, total width: 1,020 mm, total height: 2,385 mm, type of input current: AC, input voltage: 230 V, nominal heat output: 141.7 kW (192.66 HP), temperature: 90 °C, fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, Equipment: documentation/manual, hot water, type plate available, Professional ACV HeatMaster 200 N Boiler – 141.7 kW – Year 2021 For sale: used ACV HeatMaster 200 N boiler, manufactured in 2021. High-capacity boiler with integrated domestic hot water production, suitable for commercial buildings, public institutions, hotels, farms, workshops, and installations requiring significant heating and hot water needs. Key features: Brand: ACV Model: HeatMaster 200 N Year: 2021 Maximum useful power: 141.7 kW Maximum input power: 154 kW Fuel used: propane (LPG) Domestic hot water tank: 400 liters Dedpfxoztz H As Aggjkt Primary circuit capacity: 241 liters Maximum temperature: 90 °C Maximum heating pressure: 3 bar Maximum domestic hot water pressure: 8.6 bar Electrical supply: 230 V / 50 Hz Dry weight: approximately 628 kg Boiler currently disassembled. It was in operation before disassembly. Propane burner included. Some or all of the peripheral equipment from the previous installation may also be available: tank(s), circulators, valves, and piping components. To be discussed with the buyer based on their needs. Nameplate available. Additional photos available upon request. Heavy equipment: transportation is the responsibility of the buyer. Possibility to discuss loading arrangements. Price: €7,500 excluding VAT, negotiable.

Year of construction: 2014, condition: used, The burner was in operation in a steam boiler from 2014 to 2023. In 2023, the burner was replaced with a dual-fuel burner. The unit was operated under load five days a week, and at base load on Saturdays and Sundays. Since its removal, it has been stored in its packaging in a dry, temperature-controlled hall. Manufacturer / Type: Garioni Naval NG 2000 Boiler medium: Steam Dodozwfyhjpfx Aggekt Boiler output: 736.0 kW Burner output: 800.0 kW Firebox resistance (mbar): 8.0 mbar Firebox diameter (mm): 734 mm Firebox length (mm): 3,400 mm Type of gas: Natural gas N Heating value Hi: 10.35 kWh/m3 Relative density d (air = 1): 0.600 Gas flow rate: 77.3 m3/h Flow pressure at shut-off valve (mbar): 40 mbar Installation height above sea level (m): max. 450 m

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Djdpfx Aezvdftjggokt

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F Dsdpfezlbqrjx Aggskt - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the Dkedpfx Agjydh Agjgst jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Dkodpfx Aeztq Hxsggjt Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Year of construction: 2018, condition: excellent (used), Julabo Model: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent Condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a high-performance industrial cooling unit suitable for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are operational, and the display and controls work flawlessly. Typical applications: - Machine and process cooling - Laboratory and testing technology - Cooling of plastics, lasers, or systems Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connection - Casters for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Charge: 1,625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): - Approx. 1.3 kW at –20 °C - Approx. 5.5 kW at 0 °C - Approx. 7.4 kW at +20 °C Connections & features: - Supply and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface Dksdpfszix D Dex Aggot - Alarm contact (max. 30 V / 1 A) - Mobile base with casters Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Connection cable Shipping: Freight shipping on a pallet (by arrangement, shipping costs depend on destination) Collection: possible by prior appointment. (Technical data may be subject to change or errors. Details without obligation!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning Djdszwhdiopfx Aggskt - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 540-02 painting robot, serial number IRB0540-02-0087 The ABB Robotics IRB 540-02 (serial number IRB0540-02-0087) is a specialized 6-axis painting robot designed for precision applications such as coating plastic parts, electronic components, and furniture. It is known for its excellent surface quality and high process repeatability. Technical specifications: • Payload: 5 kg handling capacity • Number of axes: 6 • Robot weight: Approx. 240 kg • Mounting options: Floor or overhead mounting • System integration: Uses the S4P robot controller as standard and can be equipped with precision paint dispensing systems. Key advantages of the series: • High finish quality: Specifically calibrated for water-based, solvent-based, and powder coating processes. Dodozm Hmbepfx Aggjkt • Low material consumption: By integrating paint regulators and color change valves, overspray and paint waste can be drastically reduced. • Flexibility: Offers a large working area and a compact design, making it possible to coat even complex 3D geometries evenly. Used item – normal signs of wear. "Sample photo. The actual product may vary." Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Dksdozd Rmgopfx Agget Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Dsdpfxozc Nplo Aggokt DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: used, first registration: 12/2025, 10-Foot Container Sauna Mobile outdoor sauna based on a 10-foot shipping container (external dimensions approx. 3.0 m length × 2.44 m width × 2.59 m height), repurposed into a fully equipped sauna with glass front, multi-level benches, and technical installations. The structure retains the robust steel construction of the container as a weatherproof outer frame, complemented by high-quality wood interiors, insulation, and glass glazing for optimal outdoor use. It is stackable, easily transportable, and designed for installation on level ground without a foundation. Base structure and exterior * Container made from powder-coated steel (anthracite grey) with ISO corner fittings and reinforced profiles for stability and weather resistance. * Fully open longitudinal side with a three-part glass front made of clear safety glass (sliding doors with stainless steel handles and floor seal) for panoramic views and natural light. * External fittings: cold water column with tap and ball valve, optional shower with spray head, ventilation opening with grille at the base of the container. Interior and sauna setup Walls, ceiling, and floor fully clad in thermally treated wood (e.g., spruce or aspen, light natural color) 14-20 mm thick, three-tier seating benches with backrests and footrest. * Bench configuration: lower bench approx. 40 cm high, middle approx. 90 cm, upper approx. 140 cm; ventilated slat construction for airflow and comfort. * Floor equipped with sealed wooden decking and drain, small headrest, and integrated stone unit at the heater. Dkjdpfx Agjx Nb E Tegst Technical features and equipment Electric sauna heater (approx. 6-9 kW) with stone basket (about 20 kg olivine stones), wall-mounted control panel, and automatic overheating protection. * Ventilation: fresh and exhaust air vents with sliders (internal and external), smoke outlet and grill at ceiling/wall, indirect LED lighting behind benches. * Electrical installation: protected wiring with switches for heater and lights, integrated thermometer and hygrometer. Installation and mobility Set up on container feet directly on gravel or concrete, total weight approx. 1,200-1,800 kg, ventilated and drained. * Transport possible via forklift or crane, weather-protected seals on all openings.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Dodpfetqu Diox Aggjkt Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.