Used Walter 2018 Walter Helitronic Micro for sale (3,052)

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Dsdpfswini Esx Al Seku Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm Dkedpfx Alomv Elpj Sju spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, type of input current: three-phase, year of last overhaul: 2018, input frequency: 50 Hz, grinding spindle motor power: 1,100 W, input voltage: 400 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. - The internal lighting system was modified to highlight all sharp details. - LCD monitors were replaced. Dksdpfxozxup Uj Al Ssu - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software.

Condition: new, Year of construction: 2023, type of input current: three-phase, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Dodpfx Aloy Sw T Se Seku

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm Djdpfex Dkyyjx Al Seku - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: repair required (used), functionality: not functional, Walter HMC 500 WWM 5-axis tool grinding machine, damaged. A-axis: 750mm Dkedpfx Asz E Rcbjl Sju X-axis: 290mm Y-axis: 320mm Z-axis: 660mm Tool diameter: 200mm Error code shown in the picture.

Condition: excellent (used), functionality: fully functional, mileage: 622,000 km, power: 308.91 kW (420.00 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 73,000 mm, Year of construction: 2018, Euro 6 compliant Valid TÜV (technical inspection) until 09/2026 Thermo-King T-1000R Dedpfx Asy Urcyjl Soku Tandem trailer with a maximum permissible weight of 18 tons available at an extra cost Trailer: €7,900 net Technically sound and ready for operation.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder Dsdpfx Ajh R Tvtel Sjku double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle Dsdpfx Aljz Hmxns Sjku - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm Djdpezta U Sofx Al Sjku -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Dkjdpfx Ajzmt U Eol Seu

Condition: used, functionality: fully functional, Walter HMC 500 WWM 5-axis tool grinding machine A-axis: 750 mm Dkodpfx Alez E N Upe Sju X-axis: 290 mm Y-axis: 320 mm Z-axis: 660 mm Tool diameter: 200 mm The machine is equipped with linear scales on 3 axes.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Dsdpfsyllx Ijx Al Sjku Year of manufacture: 2014 Faceplate diameter: 500 mm

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Dodpfx Aley Ipbme Sjku Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: excellent (used), Year of construction: 2017, Stephan micro cut model MCH20FS with a ceia metal detector Dkedpfx Ajufylajl Ssu

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, throat depth: 455 mm, total width: 860 mm, total length: 2,000 mm, total height: 2,050 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 2,000 kg, sheet thickness steel (max.): 4 mm, Number of strokes 150 / 300 / 600 Min. Maximum sheet thickness 6 mm Horizontal troath 675 mm Vertical troath 455 mm Max. thickness Stainles 4 mm Max. thickness Aluminium 8 mm Motorised ram adjustment 0 - 80 Power 4.5 kW Dimensions (Estimate) Length 2000 mm Dsdpfozxf Eysx Al Ssku Width 860 mm Height 2050 mm Weight 2000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) Dsdpfx Aoz Atv Iol Seku • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: used, functionality: fully functional, Year of construction: 2018, control type: manual, Equipment: documentation/manual, emergency stop, I have an Abus slewing crane for sale. The crane was in working order until it was disassembled. The reach from the pivot axis is 4135 mm, and the height to the hook is 3446 mm. It is sold without warranty or guarantee. Djdpfx Asz Ix Hael Sjku

Year of construction: 1996, condition: ready for operation (used), Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible. Dkjdpfx Ajzpa Scol Seu

Condition: used, This listing is for a Analox GM8 Micro-Stat. The unit is in full working condition and is ready for immediate release. Unlock precision in your analytical processes with the Analox GM8 Micro Stat! This versatile instrument is designed for fast and accurate measurements, catering to a variety of applications. Applications: Dodpfxjxxza Te Al Ssku Methanol Measurement: Ideal for monitoring methanol levels in Pichia pastoris expression systems and ensuring beverage quality control when dosing with Dimethyl dicarbonate (DMDC). Lactate Analysis: Efficiently analyzes blood lactate levels, providing reliable results that compare favorably to traditional laboratory methods across various conditions. Key Features: Rapid and Accurate: Delivers swift measurements of both methanol and lactate, enhancing productivity in your testing processes. User-Friendly Design: Perfect for field or lab use, this device simplifies blood lactate measurement without compromising accuracy. Versatile Conditions: Operates effectively in diverse environments, including hot and humid settings, ensuring reliable performance wherever you are. Elevate your analytical capabilities with the Analox GM8 Micro Stat—the trusted choice for precise measurements in various critical applications!

Year of construction: 2018, condition: used, 2018 Kronen KUJ cube, strip and slice cutting machine – used Dkodpfxjz H Ax Ds Al Sou Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing. This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full specifications: / Machine type: Cube, strip and slice cutting machine Condition: Used Cutting types: Cubes, strips and slices Infeed: Inclined cleated conveyor with wide loading hopper Mobility: Cutting unit on swivel castors; conveyor on adjustable feet Safety: Emergency stop on the conveyor Construction: Stainless steel Origin: Kronen, Kehl (Germany)

Condition: used, Year of construction: 2018, 2018 Italian Pack inline traysealer – pre-owned Compact inline traysealer for fresh products. This 2018 Italian Pack traysealer seals trays with top film and is built as an inline machine with infeed and outfeed conveyor. It comes complete with a vacuum pump and several tool sets, and is suitable for MAP packaging depending on the configuration. Key features - Inline version: infeed and outfeed conveyor with guards, ready to run in a packaging line - Stainless steel construction: suited to hygienic food production environments - PLC control with touchscreen: simple operation and programmable settings - Automatic film feed: reel holder for top film above the sealing unit - Vacuum pump fitted: suitable for MAP packaging, depending on the configuration - Compact footprint: fits smaller production rooms as well Tooling included Dkodoz Hqzmspfx Al Sju The machine comes with a set of tools for different tray formats, including 2-cavity and 3-cavity versions. Want to know whether your own tray fits? Send us the dimensions and we will check it for you. Applications - Fresh meat, poultry and fish - Ready meals - Vegetables and salads - Cheese and dairy products - MAP packaging for longer shelf life and a clean product presentation Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full specifications: / Condition: Pre-owned Configuration: Inline traysealer with infeed and outfeed conveyor Frame: Stainless steel construction Controls: PLC with touchscreen controls Film feed: Reel holder for top film above the sealing unit Vacuum pump: Fitted; suitable for MAP, depending on the configuration Tooling: Several tool sets included, including 2-cavity and 3-cavity

Condition: used, This listing is for the MSE MSB010 Micro Centaur Plus Centrifuge The unit is in full working condition and is ready for immediate use Overview & Applications Designed for in vitro diagnostic (IVD) use and routine medical analysis, supporting separations of mixtures, suspensions, and bodily fluids. Lightweight (≈ 5 kg) and small in footprint (≈ 220 × 270 × 180 mm), making it ideal for benchtops, cold rooms, and transport between labs. MedWrench Rotors & Accessories Compatible with a wide range of rotors, including: 24‑place 2 ml rotor Dedpfjxhfy Ajx Al Ssku 18 × 0.5 ml 12 × 2 ml PCR strip rotors Haematocrit capillaries (24 × 50 mm) MedWrench Summary The MSE Micro Centaur Plus (MSB010) combines high speed, compact design, programmable flexibility, and strong safety measures. It's a reliable, maintenance-light option with long-term part availability, making it a solid addition to lab environment

Condition: excellent (used), Year of construction: 1988, total width: 810 mm, total length: 1,700 mm, total height: 1,700 mm, overall weight: 1,250 kg, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Dkedpfezzmtksx Al Sou Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:5.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 19/018, Dosing and bagging scale for solids and powders: Dosing machine for solid and powdered products (from 5 to 1,000 grams of coffee). The product, stored in the buffer hopper, is automatically dosed by a two-speed vibrating channel into a weighing basket. The operator can control the dispensing of the dosed product into the container to be filled. It is possible to prioritize either dosing speed or weighing accuracy. The machine is supplied with various funnels of different diameters for powders or solids. Dsdpfxoz Ehm Rj Al Seku