Used Warcom Dinamica 100-30 for sale (42,198)

Condition: used, maximum load weight: 33,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,315 mm, Year of construction: 2025, Equipment: ABS, GRANALU Full-Aluminum 3-Axle Tipper Box, 30 cbm First registration: March 2025 Mileage: only 54,008 km Internal dimensions (L x W x H): 8,000 x 2,340 x 1,600 mm Loading height: only 3,315 mm Gross vehicle weight (technical): 39,000 kg Unladen weight: 5,180 kg JOST axles with large disc brakes, 430 mm 1st axle is a lift axle with off-road starting aid WABCO trailer EBS with RSS stability control WABCO TPMS tire pressure monitoring system Aluminum air tank Lighting: full LED ALU LEG heavy-duty drop-down support legs HYVA tipping cylinder, type Alpha, suitable for high and low pressure Body floor is continuous 8 mm high-wear-resistant HERKAL aluminum Side walls made of 6 mm high-wear-resistant ALU profiles with insulating air chambers, tapering to 3 mm towards the top rail. Additionally, 4 mm tapered wear plates at the rear, approx. 2,000 x 700 mm, also made from HERKAL aluminum Slanted front wall made of 5 mm aluminum Top-hinged, swinging tailgate with double-joint bearings and two tension locks at the bottom, complete with all-round rubber sealing Kedsyzlr Uepfx Am Ejlr Roof roll tarp with central locking RENTING is the new BUYING—immediately available from us as a full-service rental option.

Condition: excellent (used), CATALOG NUMBER 7950 Technical data: - Track width: 300mm - Working shaft width: 290mm - Max. disc diameter: 300mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with extension: 680mm - Table length: 1630mm From above: - 2 rows of fingers/kickback pawls - Metal pressure roller - Shaft with saw blades - 2 smooth metal pressure rollers From below: - Guide bar - Fingers/kickback pawls - Track/chain conveyor - Electric body height adjustment (up/down) - Central chain lubrication - 2 feed speeds + variable speed control - Feed motor: 1.1kW - Main motor: 22kW - Extraction port diameter: 170mm - Overall dimensions (L/W/H): 1900x1320x1650mm - Weight: 1700kg Ksdpfeyx T R Hjx Am Eolr Advantages: – Italian-made – DTR technical documentation – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on a 4.2 EUR rate) (Prices may vary with exchange rate fluctuations)

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container Kodpfxeyuvp Ao Am Ejlr -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible Kjdpfx Amsyuut Hj Eelr -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: new, Year of construction: 2026, power: 10 kW (13.60 HP), pressing force: 100 t, overall weight: 9,000 kg, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs Kljdpfxsd Hn Taj Am Eer same machine available L = 2000 mm und L = 1400 mm

Year of construction: 2025, condition: good (used), functionality: fully functional, Height-adjustable table frame modules for individual use with various panels and superstructures. The upper rails are designed for Demmeler / Siegmund plates with 28 mm holes, sized 3000 x 1500 mm. Electro-hydraulic height adjustment: 650 - 1050 mm. Load capacity: 2,000 kg. Kodpfxoy Axvve Am Eelr

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Kledpfxeynbd Eo Am Ejr Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC Klsdpoxd Tv Defx Am Esr - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg CE mark: yes Serial number: 25050168 Klsdpfxjxdhfgo Am Esr Transport dimensions (LxWxH): 0,54x0,292x0,582 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: used, TYPE: TDM 1.2-100-300-W1 Ksdjyn R Rnjpfx Am Eolr

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Kjdpjyw Sv Ssfx Am Ejlr

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Kjdpfx Ameytzube Eolr Low-bed trailer by STEMA, model SySTEMA ST 27-30-18.2, equipped with tarpaulin and Premium frame, 150 cm (185 cm internal height), gross vehicle weight: 2,700 kg, with overrun brake, 100 km/h Subject to errors and prior sale.

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Kljdpfx Amjyt Iads Esr

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426 P, workpiece weight (max.): 900 kg, rotational speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal travel X: mm 1020 Transversal travel Y: mm 510 Vertical travel Z: mm 500 Rapid traverse X, Y: m/min 40 Rapid traverse Z: m/min 25 SPINDLE: Spindle power: kW 19 Max spindle speed: rpm 10.000 Spindle taper: BT 40 TABLE: Table surface: mm 1150 × 490 T-slots: 5 on 100 mm pitch Maximum table load: kg 900 Kjdpfsyr Sbiox Am Eelr TOOL CHANGER: Tool magazine capacity: 30 positions Tool change time: sec 3.5 Max tool weight: kg 6 Max tool length: mm 250 Max tool diameter: mm 80 Machine equipped with: • Chip conveyor • Instruction manuals and CE Declaration

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 Klsdjfc Hbdopfx Am Eor refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Kjdpst D R R Eofx Am Ejlr Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Kljdpfxot D R R Se Am Eor

Condition: as good as new (ex-display), Year of construction: 2016, Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Ksdpfx Aok Abifsm Ejlr Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Low loader by STEMA, model SySTEMA ST 27-30-18.2, with Premium tarpaulin and frame 150 cm (185 cm interior height), GVWR: 2,700 kg, overrun brake, approved for 100 km/h Klodeyqdqgepfx Am Esr Subject to errors and prior sale.

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Klsdpohxvu Eofx Am Eer Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Klodpfx Amjfx Hyfj Eer Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, stroke length: 320 mm, travel distance X-axis: 800 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19 MX, working width: 3,150 mm, bending force (max.): 100 t, distance between stands: 2,700 mm, control type: CNC control, degree of automation: automatic, number of support arms: 4, actuation type: electric, For sale is a Mecos Synchro 100/3000 press brake with a working length of 3000 mm. The machine has been hydraulically and mechanically inspected and is ready for operation. Kodpfxsyrf Sbj Am Ejlr The machine features axes X1, X2, Y1, Y2, R as well as Z1 and Z2. The entire electrical system has been renewed, including control, servo motors, controllers, and safety PLC. We offer a 1-year warranty on all electrical components. Equipped with a Cybelec control unit supporting both graphical and numerical programming. DXF files can be directly imported into the control system. Inspection possible by appointment.

Condition: good (used), functionality: fully functional, total length: 2,300 mm, total width: 400 mm, Length 230 cm (130/100 cm) Width 40 cm Ksdevzt Iljpfx Am Eolr

Condition: new, Year of construction: 2026, controller manufacturer: CYBELEC CybTouch, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 600 mm, power: 10 kW (13.60 HP), 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm Kledod Huukopfx Am Ejr

Condition: used, maximum load weight: 1,037 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 05/2022, loading space length: 3,070 mm, loading space width: 1,830 mm, loading space height: 600 mm, total width: 1,900 mm, total height: 600 mm, A10 GW26G000366 Klodsym Ifgepfx Am Esr Vehicle transport trailer by STEMA, model Carrier XL 15-30-18.1, Registration no.: L-AH 142, chassis no.: WSEHARF41NG000366, GVW: 1,500 kg, high-loader, with overrun brake, 100 km/h, 2 loading ramps behind the license plate, new tires Errors and prior sale excepted.