Used Weingarten Crank Press for sale (12,737)

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate Nlodpfjzxcldex Abush CE marking

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz Nljdpfxou Rwa Ij Abush - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m Nlsdpe Ad Sh Njfx Abuoh flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, TECHNICAL DETAILS General Information Machine Type: Single-column eccentric press Machine Weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke Rate: 120 strokes/min Stroke and Operating Data Overhang: 250 mm Stroke: 8–100 mm Installation Height: 330 mm Ram Adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping Plate: 700 × 480 mm Die Opening in Table: 240 mm Die Opening in Clamping Plate: 110 mm Ram Clamping Surface: 450 × 280 mm Tilting Design Tilting Stages: 4 Die Opening to the Rear: 325 × 500 mm Die Opening Downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space Requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Nlsdps Achxbofx Abuoh Piece counter Various accessories

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Warehouse number cod.323 Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Nedpfxevm Eifj Abujlh Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent Nljdpfx Abjtx E Rqsujh - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Njdpfeqrqz Asx Abujlh Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Safety distance: 128 mm

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Nlodpjk S Htxofx Abuoh Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! Nledpfx Aboz Tf Eneuoh The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: good (used), Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press Nljdpfx Aod Nzg Rjbujh -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Condition: used, Year of construction: 2008, 2008 Axe & Status Durma E40300 CNC Hydraulic Press Brake With Durma DU6000 Control & Assorted Press Brake Tooling Capacity 4,050 Width x 300 Tonne Bending Force. Stroke 245mm. Distance Between Columns 3,550mm. Maximum Top Tool Weight 75kg. Maximum Bottom Tool Weight 87kg. S/No. 7553083315 (2008). With Tooling Rack With Contents Of Press Brake Tooling, Trolley With Press Brake Tooling, Sick Safety Light Guards, Foot Switch & 2 Front Arm Supports. Overall Dimensions L5,600 x W2,500 x H3,100mm. Weight 17,500kg. Nsdpfoz Rw Rwjx Abuslh

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: Nsdpjzy U Uyjfx Abuslh 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm Nodpfx Abszrpp Nsujlh ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. Nsdpsxuhw Djfx Abuolh ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Nledpfot Hwz Nsx Abueh Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Njdpezb Il Nofx Abuslh Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm Nodozrpqgjpfx Abuelh table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity Nodpjx Npiysfx Abuolh UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Nledpfx Abszrpt Ueueh dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Nsdjzb Aivjpfx Abujlh Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- Nlodpfxsyutvyo Abush binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec Nodpfx Asyuttrobuolh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m Njdszrpqmepfx Abuolh with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min Nodpfx Absy Nd Svsuslh shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Nsdpfx Abez Irbqjuelh Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.