Used Wood Processing Line With Frame Saws for sale (39,130)

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Nodpfxow Ahg Ro Ahzewg Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. Njdpfx Asx Ruudehzowg 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. Nwodpfx Aex Rut Tjhzog 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Nodpfx Ahjv U Ea Hjzowg VACAM CNC Control. Short piece removal.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity. Nedpfexmvnujx Ahzjwg

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg Nodjvpafyspfx Ahzswg

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Nwodsx N Iclopfx Ahzsg Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. Nwjdpfx Aheig T Amjzsg 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2008, Voortman V613 / VB750 CNC Drilling / Sawing Line – Year 2008 Njdpfx Aov U Ebwehzewg Rotating Spindle. 19 metres In-Feed. 12.5 metres Out-Feed. Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 Nodsl Si Uuepfx Ahzewg max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Condition: new, Year of construction: 2026, Description of the machine: Efficient and fast cutting of large diameter wood Stable and durable construction resistant to overloading Safe operation thanks to pivoting system Easy to use and maintain Carbide circular saw included Njdpfx Ahswtp Rljzowg Technical data Maximum diameter of blade/hole [mm] 700x30 Maximum height of wood [mm] 280 Maximum width of wood [mm] 290 Disc speed [rpm] 1400 Motor power 5 kW Power supply 400V Weight 92, 5 kg Dimensions [mm] 1170x770x1070 Declaration CE yes

Condition: ready for operation (used), Year of construction: 2020, total height: 1,700 mm, overall weight: 1,950 kg, product length (max.): 1,700 mm, General Data Machine weight 1950 kg Measurements height 1700 mm Dimensions Machine Length 1700 mm Nwsdpfx Asx D Iprehzeg This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine. Application Types Sawing (Wood)

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Nwjdpfxex D Rh Re Ahzjg Application Types Complete Production

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Nodpfoxw Ubnox Ahzowg

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Nsdpoxw Uf Tsfx Ahzowg

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Fully hydraulic. With hydraulic saw tensioner. Ideal as a replacement sash gang or swing replacement. Njdpfxjuql Ilo Ahzjwg

Condition: good (used), functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained high-performance full frame saw Njdpfxoy D Hitj Ahzswg Frame clearance: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and blade suspension Drive motor and gear unit Electrical control cabinet with control system Splitter wedge type AVER, hydraulically driven In very good condition (optionally COMPLETELY REFURBISHED!) Top condition with remote-controlled tensioning carriage

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Nwjdpfx Aohx R Etehzeg Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – after technical inspection, ready for operation Specification: • Technical condition: used, after comprehensive maintenance • Manufacturer: OMGA • Model: TR2A • Main motors: 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Max. cutting length: 312 cm • Min. cutting length: 10 cm • Max. cross-section at 90°: 80x145 mm Nsdpfxjy Rh Dre Ahzewg • Max. blade diameter: 300 mm • Mitre cutting range: -45° to +45° (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports: 80 mm diameter • Weight: approx. 500 kg • Overall dimensions: 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos provided show the actual condition of the item for sale • Inspection and functional testing possible on-site • The listed price excludes VAT and transport costs Financing and transport: • Transport can be arranged via our own MDD fleet, couriers, or external carriers • Financing support available in the form of leasing or lease loans

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Nodpfx Asw Ag T Ashzewg Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw Nedpfx Ahegwt S Ejzswg • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm Nsdpfsyak Anjx Ahzjwg - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: used, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm -Saw band: length 5330 mm -Work table: pivoting Nwsdpskia T Uofx Ahzjg -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg Nwsdeh N Thwjpfx Ahzsg

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit Nodpou Rv Ttofx Ahzswg -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg