Used Albert Frey Crater for sale (161)

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. Codpfxjb Nzyco Ab Djhb - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Condition: good (used), Year of construction: 1977, machine/vehicle number: 6297, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 380 V, cutting height (max.): 100 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Industrial table saw with 3000mm table. The blade cannot be tilted. It has been in everyday use, being sold becuse of machine change. It needs a little fine adjustments, but it works well. Pre-cutting motor was added to the machine. Chsdezi Emrspfx Ab Djb

Condition: used, Year of construction: 1991, functionality: limited functionality, For sale: Miyano BND34s lathe incl. LNS bar feeder & accessories A CNC lathe from the manufacturer Miyano is being offered for sale. The BND34s model is ideal for series production and is being sold as a package with various accessories. The unit is in ready-to-use condition and was in operation in our production until recently. Model: Miyano BND34s Cjdpjxvz A Aofx Ab Dshb Bar feeder: LNS Hydrobar

Condition: used, Edwards Maglev turbomolecular pump STP XA4503C (moz8950) + SCU1500 Controller. Fully tested. Cedpfsztbhtjx Ab Dohb

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26023, Year of construction: 2019, operating hours: 19,378 h, load capacity: 4,000 kg, lifting height: 5,365 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,650 mm, motor manufacturer: VW, gearing type: hydrostat, fork length: 2,300 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 6,265 kg, Equipment: UVV, cabin, lighting, sideshift, Equipment: Triplex mast with full free lift, overall height: 2650 mm, lifting height: 5365 mm, fork positioner with side shifter, fork length: 2300 mm, LED work lights front and rear, fully enclosed cabin with heating, 6-cylinder VW gas engine, foot-operated dual-pedal control, 4x SE tires, operating manual included. Technical condition at the time of sale: Forklift is technically refurbished! Major maintenance newly performed! UVV inspection passed without any deficiencies! Delivery: In perfect condition! 20 years of professional experience! Cedpozhn Icjfx Ab Dshb INSPECTION AND TEST DRIVE: Available at any time during opening hours after prior appointment: Monday to Friday. From 8:00 AM to 6:00 PM. Saturday from 8:00 AM to 1:00 PM. TRANSPORT: Low-bed or covered truck available at a reasonable price.

Condition: used, Year of construction: 1980, functionality: fully functional, runs perfectly Chjdpfx Asy D Rngeb Deb

Condition: used, mileage: 139,435 km, power: 100 kW (135.96 HP), first registration: 03/1997, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 3, Equipment: crane, * Roofing crane, Albert Böcker, type AK 32/1200 Chedpswnk Emsfx Ab Djb * 32-meter lifting height * 1200 kg load capacity * Remote control * Work platform * Tile clamp

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor Cjdozf Ihqopfx Ab Dshb • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Rated power: 5.5 kW Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: ready for operation (used), Lift for one floor. Chsdpfx Absy U Na Ne Djb

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: AB/118718, functionality: fully functional, SMC SCIE spindle shaper SI12TW Chodpfx Aezc Dxzjb Dsb Table length: 1,500 mm Spindle adjustment: up/down Blade adjustment: up/down Blade angle adjustment: up to 45° Cutting width on the right side: 1,450 mm Maximum blade diameter: 300 mm Milling spindle diameter: 35 mm Spindle speed: 3,000/4,500/6,000/8,000/10,000 rpm Saw speed: 4,000 rpm Motor power: 4 kW Available in the Ardennes region.

Condition: ready for operation (used), Year of construction: 2005, Specifications • Year: 2005 • Dimensions: 1400X600X590mm • CNC Type: HEIDENHAIN TNC 310 • Table length: 2000X470mm • Maximum load capacity: 1.2 tonnes • Spindle speed: 3000 rpm • Manual universal head • Spindle nose: BT 40 • Power: 9 kW • 2 speed ranges • Rapid traverse rate axes X, Y, Z: 8 m/min • Footprint: 3960x2450x2600mm • Coolant system Chjdpozlg Rwsfx Ab Deb • Hydraulic tool clamping • Spindle cooling system • Transformer • Weight (kg): 5500 kg Available for inspection in the ARDENNES region.

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: DC, cutting height (max.): 285 mm, actuation type: manual, overall weight: 440 kg, saw band length: 2,950 mm, saw band width: 27 mm, Equipment: documentation/manual, For sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Cedpfx Ajy Uwuuob Dehb MEP manual bandsaw machine TYPE: SHARK 282 CCS Motor power 1.5/1.8 kW Table opening 285 mm Band dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min Cutting capacity at 0° 250 / 220x220 / 280x220 Cutting capacity at 45° right 230 / 200x200 / 220x200 Cutting capacity at 45° left 200 / 170x170 / 200x140 Cutting capacity at 60° right 120 / 80x80 / 140x80 Cutting capacity at 60° left Accessories: - MD 12 micro-dosing device MINI-GF - EL-1/2-2L - Conveyor roller table, type K 110

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Chsdpfx Aeytvyfeb Dsb

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 13,501 h, load capacity: 1,600 kg, lifting height: 4,625 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, Equipment: UVV, lighting, sideshift, Triplex mast with full free lift, overall height: 2150 mm, lift height: 4625 mm, integrated side shifter, fork length: 1200 mm, LED work lights front and rear, blue warning light, manual single-pedal transmission, 48V/625Ah battery from 2018, SE tires, operating manual included. Technical condition at the time of sale: Forklift has been technically overhauled! Major service newly performed! (Timing belt and water pump also replaced) UVV inspection passed without any defects! Forklift newly painted! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Chodpfx Abetvw Rhj Dob By appointment at any time during opening hours: Monday to Friday. From 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Low-loader or covered truck available at a reasonable price.

Condition: used, Year of construction: 2008, functionality: fully functional, FEZER Vacuum Lifter with Wall-Mounted Jib Crane for sale! Manufacturer: FEZER (Albert Fezer Maschinenfabrik GmbH), Germany Type: Vacuum lifting system Chedpfszu Avhjx Ab Dsb Operating principle: Vacuum gripping and lifting using a vacuum generator and vacuum lift hose Material: Ergonomic handling of wood panels, MDF, particle board, plywood, plastic sheets, metal sheets and similar flat materials. Technical Features Carrying capacity: 60 kg Boom length (reach): approx. 5.10 m Vacuum generator Vacuum lift hose Ergonomic one-hand control unit Interchangeable suction feet Wall-mounted jib crane Manual crane travel Smooth and precise handling of flat workpieces CE compliant

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Csdpjx Ehlcofx Ab Djhb

Condition: used, mileage: 347,649 km, power: 368 kW (500.34 HP), first registration: 01/2022, fuel type: diesel, color: white, gearing type: automatic, Equipment: had accident, LOCATION: Ales Kresnik Transporte Albert-Tillmanns-Weg 12 D – 42899 Remscheid Tel: !!!ENGINE DAMAGE!!! General condition: EURO VI, E, M, in relation to age and usage, the vehicle/object is in a condition typical for its age and use, apart from the described damages/defects. Number of seats: 2 Detail info on COLOR -1-: White, solid paint Detail info on COLOR -2-: LOGO Drive type: Diesel Number of axles: 2 Number of driven axles: 1 Overall length: 5911 mm Csdoyra N Ispfx Ab Dohb Overall width: 2540 mm Overall height: 3925 mm Axle 1: Tyres: Left 315/60 R 22.5, W/O, . , 6 mm Axle 1: Tyres: Right 315/60 R 22.5, W/O, . , 6 mm Axle 2: Twin tyres: Left inner 295/60 R 22.5, W/O, . , 10 mm Axle 2: Twin tyres: Left outer 295/60 R 22.5, W/O, . , 10 mm Axle 2: Twin tyres: Right inner 295/60 R 22.5, W/O, . , 10 mm Axle 2: Twin tyres: Right outer 295/60 R 22.5, W/O, . , 10 mm

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data - Capacity: up to 20,000 bph - Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles Chodpfxoyb R Uas Ab Dsb - Condition: Line in good condition - Availability: Immediate - Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer

Condition: used, Year of construction: 1980, functionality: fully functional, functions perfectly Chjdpfx Absx Eigze Djb The machine weighs approximately 4 tons.

Condition: used, mileage: 1,001 km, first registration: 07/1964, empty load weight: 1,100 kg, tire size: 10.5-20 10PR, color: red, driver cabin: other, gearing type: other, total length: 4,000 mm, total width: 1,970 mm, total height: 2,440 mm, Vehicle location: Bovenden, 1 axle, doors Superstructure: TSA-8, portable pump trailer Chassis: Industriewerke Karlsruhe (IWK) First registration: 07/01/1964 Manufacturer: Albert Ziegler - Fire Extinguishing Equipment Factory (Giengen a.d. Brenz) Type: TSA - 8 Chjdslrvq Ejpfx Ab Dsb Height-adjustable drawbar, doors at the front and rear, roof rack Suitable vehicle: KLOECKNER-H-DEUTZ Jupiter 178 D 15 A, 6x6 -902599- ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used Chjdpfxey D An Ss Ab Dob - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: used, Veeco Dektak 8 Cjdpjwr A Smofx Ab Dshb Working condition and calibrated

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26010, Year of construction: 2012, operating hours: 9,000 h, load capacity: 2,500 kg, lifting height: 4,750 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, motor manufacturer: VW, gearing type: hydrostat, fork length: 1,200 mm, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), total height: 2,150 mm, Equipment: UVV, lighting, sideshift, Triplex mast with full free lift, closed height: 2150 mm, lift height: 4750 mm, fork positioner with side shifter, fork length: 1200 mm, half cabin, LED work lights front and rear, VW LPG engine, double pedal foot control, 4x non-marking SE tires, operator’s manual included. Technical condition at time of sale: Cjdpfsypugcex Ab Djhb Forklift has been technically overhauled! Major maintenance newly carried out! UVV safety inspection newly passed without defect! Delivery: In perfect condition! 20 years of professional experience! VIEWING AND TEST DRIVE: By appointment during business hours: Monday to Friday from 8:00 am - 6:00 pm. Saturday from 8:00 am - 1:00 pm. TRANSPORT: Low-loader or covered truck available at a reasonable price.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,118 h, laser power: 6,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details. • Gesamtantriebsleistung: ca. 11,5 kW (nur Maschine ohne Zusatzausstattung) • Elektrische Ausführung: nach VDE-Richtlinien, Spannung 400 V ± 10 %, 50 Hz mit Nullleiter • Connected load: 400 V / 50 Hz / 12 kVA Codeyrfbcjpfx Ab Dehb • Main fuse: 3x160 A • Fehlerstromschutzschalter in der Netzeinspeisung nur als allstromsensitive Ausführung mit 300 mA zulässig • Steuer- und Ventilspannung 24 V-DC • Multitasking Prozesssteuerung mit großem Bedienterminal und übersichtlicher Menüführung • Schaltschrank und Bedienpult frei aufgestellt • Lackierung Grundmaschine: lichtgrau - RAL 7035 • Lackierung Abdeckungen: rotviolett - RAL 4002 • Minimale Abschnittlänge: im automatischen Betrieb ab 10 mm • Mindest-Reststücklängen: ca. 180 mm • Verfahrweg des Nachschubgreifers: 3.000 mm • Gewicht des Schneidgutes: bis max. 4.000 kg • Länge der Maschine: 5.600 mm • Breite der Maschine: 4.300 mm • Höhe der Maschine: 2.550 mm (2.150 mm für Transport), Anlage zum Transport geteilt • Gewicht: ca. 3.100 kg • Materialauflagehöhe: 800 mm • Sägebandspannung: hydraulisch, elektrisch überwacht • Kühlmittelbehälter Fassungsvermögen: ca. 60 l • Kühlmittelpumpe Fördermenge: 40 l/min bei 2,5 m Förderhöhe, Leistung: 115 W • 3RD CNC 6006, Motor 13,1 kW, Spindeldrehzahl 50-5000 U/Min. • Tisch 6100x580 mm, ausgeführt mit Späneförderer • Verfahrwege X/Y/Z 6100x600x450 mm • Pendelbetrieb (Be- und Entladen während Maschine produziert) • Standardausführung inklusive: 15,4” Touchscreen PC und Pentium 5 PC, 8GB RAM, 120GB Festplatte • Grafische Programmierung • Automatische Werkzeuglängenvermessung • Bedienpult extern auf Linearführung • Verkleidung um Maschinenkopf • Laser-Gebietssensor (Pendelbetrieb) • Kühlanlage mit Emulsion • Ethernet-Anschluss für Teleservice • Gemäß Angebot vom 26. Januar 2022 • Inklusive: Tisch 70 mm abgesenkt und Säule 100 mm verlängert, Abstand Spindel-Tisch 295-745 mm • 16-fach Werkzeugwechsler • Elektronisches Handrad für manuelles Verfahren der Achsen • Kühlung durch die Spindel, Arbeitsdruck 4 Bar, ausgeführt mit Drehzufuhrventil geeignet für Kühlung mit nur Luft • Automatisches Tastsystem für die Höhe des Werkstücks (Z-Reader) • Komplette DrillCam CAD/CAM Software zum Konvertieren von 2D DXF, DWG, DSTV, NC, NC1 oder 3D STEP Dateien zu Maschinenprogrammen, auf der Steuerung der Maschine installiert • Safety: Light barrier system • Laser hours: 20,118 h • Condition/Service: Completely freshly serviced • Enclosed machine frame with integrated laser unit • Gantry drive combined with linear drives • Automatic pallet changer • Longitudinal conveyor belt • Cross conveyor (waste conveyor) • Work area lighting • PCS (Process Control System) • Positioning laser diode • Oil spray system • HI-LAS • HI-LAS PLUS • PMS (Plasma Monitoring System) • Trumpf Laser: CO2 laser TFL 6000 • Cooling unit • High-frequency excitation • Laser power control • Programmable cutting gas pressure setting • DIAS III • AutoLas Plus • Oil spray system for safe thick sheet metal processing • Automatic shut-off • Programmable power cycles • Laser logbook function

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. Taiwanese machinein new condition. IT has been a demonstration machine, has run a few hours. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Auto crossing stroke adjustment Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Wheel flange (extra) Back water splash shield Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Chedpfem Tv U Tjx Ab Dob Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines