Used Automatic Punching Press Four Columns for sale (37,829)

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m Bedpocxxycefx Ab Djll with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder Bledpfx Abjcxxrde Del

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min Bjdpfjcxxxmox Ab Dell stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Bledpohlnzkjfx Ab Dol Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Bsdpfozuzxhex Ab Doll Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. A video demonstrating the machine's operation can be sent upon request.

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm Bledpfxeu Nfmao Ab Del table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: new, Year of construction: 2018, machine/vehicle number: DF0116 - Rev.00, pressing force: 110 t, pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Blsdpodxvflsfx Ab Djl Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min Bledpevu E Iqefx Ab Dol total power requirement 20 kW

Year of construction: 1991, condition: used, pressure 100 t Blsdpfx Ajlp U D Nsb Dsl passage width 810 mm stroke 400 mm table surface area 1140x740 mm ram surface 1140x740 mm dayligth 670 mm weight of the machine ca. 8 t dimensions of the machine ca. 1800x1800x3000 mm

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm Bledjin Et Nspfx Ab Dol stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: used, Year of construction: 1992, pressure 300 t Bledpfxovn U Srs Ab Dsl passage width 1350 mm stroke 500 mm column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm total power requirement 45 kW weight of the machine ca. 20 t dimensions of the machine ca. BxTxH 2500x2000x3950 mm

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Bsdpfxovu E Iwe Ab Djll total power requirement 5,5 kW

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Bjdpewzzzfefx Ab Dell Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Stroke adjustment: 97–400 mm Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Bledpfx Aozlpm Iob Dsl Including transfer and coil line.

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Bljdpfx Abjyylqbj Dsl LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: used, Year of construction: 1994, punching pressure:20 t total power requirement:4 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m punch diameter:max. 105 mm sheet thickness - max.:6 mm stroke length max.:25 mm voltage:380 V Bsdpfx Abjh Ra Rno Dsll frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm input unit:0,01 mm

Year of construction: 1991, condition: used, pressure 150 t passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm ram surface 1100x1070 mm Bjdpjlp U R Djfx Ab Dell hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation Bsdpfx Abog Iihwe Dsll at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m Bjdpfx Aoh Ra N Reb Doll

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Bjdpfx Ajdzqddeb Djll Weight: approx. 10 tons Good condition (very little use)

Condition: new, Year of construction: 2026, pressing force: 100 t, Durendus DCD-100 – Hydraulic Deep-Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a hydraulic C-frame deep-drawing press (single-column press) from Durendus with an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep-drawing, and assembly tasks. It is equipped with an integrated deep-drawing cushion and a state-of-the-art Siemens control system. Featuring high travel speeds and precise control, it is ideal for both series production and flexible single-part applications. ===== Technical Data & Information: Hydraulic C-Frame Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / single-column press - Pressing force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm Bljdpfxoyw I T He Ab Dsl ==== Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler ==== Additional Functions - Deep-drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance available ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operation statuses via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep-drawing, forming, assembly operations, punching processes, series production, toolmaking Single-column press, C-frame press, deep-drawing press, hydraulic press, industrial press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety guideline NR 12, which is based on these requirements. Our core strengths are special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, Year of construction: 2026, Experience Palletisers & Toppy's fully automatic pallet changer systems, tailored to seamlessly integrate into your production lines, high-bay warehouses, and specific applications. Palletiser & Toppy work closely with system integrators to create customized pallet changer solutions that address your company’s unique requirements. Toppy "Four Press" is one of the safest solutions in our range. It is specially designed for fragile and unstable loads and features four walls (two front and two side) along with optional 'special mats' to secure products during pallet exchange and eliminate any risk of falling. The entire pallet change process is fully automated, ensuring efficiency and safety in your operations. Bledpfx Aexd Eyhjb Djl Our in-house R&D team specializes in designing and adapting fully automatic pallet changer systems that fit your workflow, range of products, and specific needs. Whether you operate in logistics, manufacturing, or another industry, Toppy’s solutions provide the ultimate in safety, efficiency, and system integration. A fast and simple method to switch between wooden and plastic pallets, or vice versa.

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Blsdpfem Nntyex Ab Dol Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links Bjdpfx Aocxxu Njb Doll stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Bedpfxezrwzaj Ab Doll Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.