Used Bearing Disc for sale (9,560)

Condition: refurbished (used), Year of construction: 2011, operating hours: 818 h, Hako Scrubmaster B45 TB 430 with On-Board Chemical Dosing. Lasdpfx Aeu Stndsnxeg Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6 months warranty and new DGUV V3 electrical safety inspection with test report. Working width without squeegee: 43 cm Working width with squeegee: 76 cm Maximum area coverage: 1,700 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Traction drive: Yes Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / Performed repairs: - New suction motor 24V 400W - 2 x 12V 85Ah GEL batteries (new) - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses replaced (new) - New disc brushes - New ACLA rubber wheels - New squeegee blades - New fresh water filter In addition, we offer: Service, repairs, and sales for all common Hako models.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: Laodpfxew E H E Rs Anxjg - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing Lasdsw U Eh Ispfx Anxeg * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Lajdpfx Anet Dx U Sjxjg Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Lajdpfxezcfhdo Anxog

Condition: excellent (used), Year of construction: 2020, Ref:11144. 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Laedpoz Aklasfx Anxsg Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2026, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, Year of construction: 2026, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-660 Registered for 3 months, returned from rental. Used PAVIC HTA 20 66Z short log trailer with ALCOA DURA BRIGHT. IMMEDIATELY AVAILABLE! 2-axle skeletal trailer 4x OPTIPA SL skeletal couplings 8x OPTIPA AL10 loading beams 2x buffer beams (steel) Chassis length approx. 6600 mm Front overhang approx. 710 mm (turntable) Screwable hooks on the loading beams for load securing Payload 14,750 kg Technically possible total weight 22,000 kg EBS / ABS Air suspension with safety cables, leaf spring suspension available upon request 2 x 10t SAF off-road axles Steering turntable with double ball bearing row, permissible axle load max. 20 tons Lifting cable at the front Smartboard Wabco Highly visible signal lamp system at the front as an indication of the maximum air spring pressure LED lighting LED work lights High-quality KTL coating - including baking process Twin tires: 275/70 R 22.5 with branded tires Aluminum wheel rims, manufacturer ALCOA Dura-Bright Financing available through our financing partners. Our sales team is available to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle Configuration Tire Size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front Axle: Aluminum rims; Steered Rear Axle: Aluminum rims Ledszikhhspfx Anxeag Functional Trailer Body Brand: PAVIC short log skeletal trailer OPTIPA SL Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical Condition: very good Optical Condition: very good Damage: none

Condition: used, mileage: 612,000 km, power: 375 kW (509.86 HP), first registration: 05/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), MERCEDES-BENZ ANTOS 2651 6X2 CHASSIS, ALCOA RIMS? STEERING/LIFT AXLE? RETARDER? LEATHER? FROM FIRST OWNER? ----VEHICLE HISTORY ? GERMAN VEHICLE ? FROM FIRST OWNER ? VIDEO AVAILABLE UPON REQUEST ? 612,000 KM ? IMMEDIATELY READY FOR OPERATION VEHICLE EQUIPMENT Lodpfx Anoy Tgaqsxoag ? CHASSIS ? 6X2 DRIVE ? STEERING AXLE ? LIFT AXLE ? MERCEDES POWERSHIFT AUTOMATIC TRANSMISSION ? CRUISE CONTROL ? AIR CONDITIONING ? ACTIVE BRAKE SYSTEM ? LANE KEEPING ASSISTANT ? DIFFERENTIAL LOCK ? COMFORT SUSPENSION SEAT ? LEATHER SEAT, DRIVER'S SIDE ? SEAT HEATING ? REFRIGERATOR ? ALUMINUM RIMS ? FULL AIR SUSPENSION ? M CAB ? ELECTRIC WINDOWS ? BLUETOOTH RADIO ? HANDS-FREE SYSTEM ? CONSTRUCTION SITE FILTER ? TOOL BOX ? CB RADIO PREPARATION ? TRAILER COUPLING ? RINGFEDER TRAILER COUPLING ? 15-PIN TRAILER SOCKET ? ABS / ASR ? DISC BRAKES ? TELLIGENT BRAKING SYSTEM ? REAR UNDERRUN PROTECTION ? 1 X STEEL TANK, 300 L ? ADBLUE TANK, 35 L AXLES / SUSPENSION ? FRONT AXLE, 7.5 T ? REAR AXLE, 13 T ? FRONT AXLE, LEAF SPRING SUSPENSION ? REAR AXLE, AIR SUSPENSION ? STEERING LS 6 / LS 8 FURTHER INFORMATION ? PERMISSIBLE TOTAL WEIGHT: 26,000 KG ? WHEELBASE: 4.60 M ? TIRE SIZE, FRONT: 385/65 R22.5 ? TIRE SIZE, REAR: 315/80 R22.5 ? TIRES IN GOOD CONDITION ? VEHICLE IMMEDIATELY AVAILABLE ? VEHICLE IMMEDIATELY READY FOR OPERATION SPECIAL AGREEMENT ? WHEEL BEARING, 3RD AXLE, FIXED ? UNLADEN WEIGHT: 15,010 KG ? PAYLOAD: 8,990 KG ----EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. CHANGES, ERRORS AND PRIOR SALE EXCLUDED. LEGAL INFORMATION THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY AS THE BASIS FOR CONTRACTUAL NEGOTIATIONS. ALL INFORMATION IS PROVIDED WITHOUT WARRANTY. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Lodpfx Ajvvkipenxeag

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 265/70-19,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-375 Available immediately !!! SPECIAL PRICE !!! GREATER LOAD VOLUME PAVIC HTA 20 66 ZNL (Twin tires, Low, Light) Short log trailer for wood transport, very low construction, from the ground to the top edge of the platform only 1,250 mm! * 2-axle platform trailer * 4x OPTIPA SL platforms * 8x OPTIPA AL10 aluminum side posts * Loading area length 6,600 mm * Screwable hooks on the loading platforms for securing the load * Permissible total weight 18,000 kg, technically possible 20,000 kg * Payload 14,800 kg, technically possible 16,800 kg * EBS / ABS * Wabco SmartBoard with weighing system * Signal light system for detecting the max. air spring pressure * Air suspension * Safety cables for air suspension * 2 x 10 t SAF OFF ROAD axles * Disc brakes (on request, drum brakes can be supplied upon order) * Air tanks 2x 60 l made of aluminum * Y-drawbar with 40 mm drawbar eye * Steering ring with double ball bearing, permissible axial load max. 20t * Lifting cables at the front and rear * High-quality LED tail lights and position lights * LED work lights Laedpfx Ajzqakhenxeg * High-quality powder coating - coating including baking process * Twin tires: 265/70 R 19.5 with branded tires Financing possible through our financing partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle configuration Tire size: 265/70-19.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,100 kg Payload: 18,000 kg GVW: 20,000 kg Functional Brand of the body: PAVIC short log platform OPTIPA SL Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: used, mileage: 163,990 km, power: 235 kW (319.51 HP), first registration: 09/2014, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal reference: 1141 * Vehicle from first municipal ownership * MAN TGS 28.320 * 3-seater * Automatic * EURO 6 * Tyre condition: 7/7, 9/9/9/9, 7/7 * Maintenance performed at 144,375 km; now, as of Dec 2025 – 153,081 km – renewal: diesel filter, air filter, air dryer cartridge, front axle wheel bearings replaced, front axle brake pads and discs replaced, transmission actuator (3,516 EUR/net), ABS sensor, etc. Invoice available for EUR 7,786.85 incl. VAT. * Chassis equipment: VOK-09 dropped frame, parabolic spring 8.0 t (2-leaf), electronic stability program (ESP), rear axle differential lock, liftable trailing axle, M-FHS (F99L/R17), dashboard center section with one drawer, FHS rear wall with 2 tinted windows, heated/electrically adjustable rear and wide-angle mirrors, heated driver comfort seat, radio with navigation system, passenger comfort seat, external sun visor, heated/electrically adjustable kerb mirror on the right, EU front mirror, toll recording OBU DIN slot, roof antenna GPS/phone, digital tachograph, daytime running lights, combined main beam/fog lights with cornering light, side marker lights, 315/80 R22.5, underrun protection/entrance step front, raised exhaust pipe on right, 3-piece rear mudguards, chassis with FHS, MAN TipMatic, ZF Intarder, rotating beacons, work lights. Laodpern Nf Sofx Anxeg * Central lubrication system for the body * Body manufacturer: FAUN UMWELTTECHNIK * Model/Designation: ROTOPRESS 519L * Serial No. 11519-14-523025, Year of manufacture: 11.09.2014 * Lifter manufacturer: ZOELLER KIRCHHOFF GROUP * Model/Designation: LIFTER 02301 DELTA * Serial No. 1406365-002, Year of manufacture: 01.07.2014 * ... * All details without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° Ljdpfx Anetv Riaoxoag - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: used, Debarking plant with drum debarker and disc chipper. Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Lsdpfxow N Rxbj Anxjag Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, total length: 5,200 mm, total width: 2,550 mm, tire size: 285/70 R19,5", color: grey, 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! Lodpfx Aszm Trqsnxsag Conversion to CLG dolly in progress – some units already completed. Please note: The photos shown are archive images and may differ from the actual vehicle. # Chassis Heavy-duty fine-grain steel welded construction Fifth wheel coupling (manufacturer of our choice) for 2" kingpin with ball-bearing turntable, steering angle max. 20° Telescopic landing leg 2 wheel chocks with holders Steel rear underrun protection Half-shell mudguards CLG drawbar with certified 50 mm towing eyes for connection to both the dolly and the towing truck. # Axles + Suspension BPW disc brake axles Air suspension with raise/lower valve # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at the front with connecting lines to the towing vehicle 2 non-interchangeable air couplings for the semi-trailer Electronic Braking System (EBS) with front EBS connector and connecting cable EBS connection cable for the semi-trailer Axle load detection for the truck via EBS Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white LED front position lights 2 white/red LED rear outline marker lights 1 × 15-pin connector with cable to the towing vehicle 1 × 15-pin connector with cable to the semi-trailer # Registration Prepared for registration in Germany DEKRA approval included Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Dimensions Fifth wheel height: approx. 1,150 mm Drawbar coupling height: approx. 380 mm Archive photos – actual vehicle may vary.

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Lajdpfjzpbazox Anxjg Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Lajdpfx Aozy Ndcenxog Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Laodpfx Aez Aquzsnxsg

Condition: new, maximum load weight: 29,880 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,765 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,230 mm, Year of construction: 2026, Equipment: ABS, Wielton Strong Master Hardox steel tipper with a 30 m³ payload volume HP tipper Immediately available Lajdpfjzzhaxjx Anxeg Overlapping swing gate with grain discharge chute New vehicle, immediately available! Unladen weight approx. 6,120 kg Equipment: - SAF disc axles - Axle lift with control line - Automatic tilting lowering - SAF geared landing gear, full load capacity - KNORR braking system - Semi-circular Hardox tipper body - Floor 4 mm / side wall 3 mm - Overlapping swing gate with lateral tension lock - Grain discharge chute in the center + additional swivel locks - Double swing bearing and replaceable rubber seal - Roll cover with quick-release fastener - Operating platform on the frame - Hydraulic cylinder Hyva 250 bar - Tires 385/65 R22.5 Hankook TH31 - Steel rims - Rear lights, full LED Aspöck - 2x LED reversing lights - Tool box - Water tank Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or the purchase contract are binding. You will receive detailed information on the exact scope of equipment and prices from our sales team. Please contact us.

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-304 PAVIC HTA 20 66Z short log trailer with ALCOA DURA BRIGHT, in a well-proven design, always in stock at PAVIC! IMMEDIATELY AVAILABLE! You can choose the color of the spar stripes from red, green, blue, neon red, neon yellow, or black! - 2-axle skeletal trailer - 4x OPTIPA SL skeletal bolsters - 8x OPTIPA AL10 load securing bars - Chassis length approx. 6600 mm - Front overhang approx. 710 mm (turntable) - Screwable hooks on the loading bolsters for securing the load - Payload 14,750 kg - Technically possible total weight 22,000 kg - EBS / ABS - Air suspension with safety cables, leaf spring suspension available upon request - 2 x 10t SAF off-road axles - Steering ring with double ball bearing row, permissible axial load max. 20 tons - Lifting cable at the front - Smartboard Wabco - Signal lamp system at the front, clearly visible as an indicator of the maximum air spring pressure - LED lighting - LED work lights - High-quality KTL coating - coating including burn-in process - Twin tires: 275/70 R 22.5 with branded tires - Aluminum wheel manufacturer ALCOA Dura-Bright Financing available through our financing partners. Our sales team is available to answer any further questions. Laodoylvcwjpfx Anxsg This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle configuration Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Aluminum rims; Steered Rear axle: Aluminum rims Weights Unladen weight: 7,250 kg Payload: 14,750 kg GVWR: 22,000 kg Functional Brand of superstructure: PAVIC short log skeletal OPTIPA SL Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Lodpfjvz S Siox Anxeag Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-149 !!! WORLD EXCLUSIVE !!! PAVIC HTA 20 66Z Shortwood Trailer with OPTIPA SW bolsters. SW = Quick-change. With this, you can remove the OPTIPA AL10 telescopic stakes in just a few minutes and have complete flexibility! Ideal for roundwood and sawn timber! The side bolster storage is included! You have the greatest possible flexibility that the market offers! !!! IMMEDIATELY AVAILABLE !!! You can choose the color of the stake strips from red, green, blue, neon red, neon yellow, or black! 2-axle bolster trailer 4x OPTIPA SW bolster body (quick-change system using a patented wedge system) 8x OPTIPA AL10 telescopic stakes Special wrench for stake assembly and telescoping Side aluminum box for storing the stakes (for 4 pieces) Optionally, a second, larger aluminum box for all 8 stakes could also be realized for an additional cost Chassis length approx. 6600 mm Overhang at the front approx. 710 mm (turntable bolster) Bolt-on hooks on the loading bolsters for load securing Payload 14750 kg Total weight technically possible 22,000 kg EBS / ABS Air suspension with safety cables, leaf spring suspension available upon request 2 x 10t SAF off-road axles Ledpfx Ajylvhmsnxsag Steering ring with double row of ball bearings, permissible axial load max. 20 tons Lifting cable at the front Smartboard Wabco Signal light system at the front, clearly visible as an indicator of the maximum air spring pressure LED lighting LED work lights High-quality powder coating - coating including the baking process Twin tires: 275/70 R 22.5 with branded tires on steel rims Optional: ALU wheels, brand ALCOA Dura-Bright, available at an extra cost Financing, leasing or hire purchase are possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered GVWR: 22,000 kg Brand of superstructure: PAVIC shortwood bolster OPTIPA SW (quick-change) General condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2026, Screening drum with star discs, separation distance 15mm Medium screening - grain size 0 - 20/25mm Adapter system Lehnhoff MS03 - not included in the price - available upon request Excavators from 4 tons / wheel loaders from 3.5 tons Cutting width 800 mm / 3 drums Capacity 0.30 m³ Throughput / hour 10.5 - 15 m³/hour Working pressure 200 - 250 bar Ljdpezvfrnsfx Anxoag Oil requirement 50 - 60 l/min - Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil, for example for topsoil in landscaping. - The simultaneous mixing of compost, sand, substrate, etc. with the screening process is easily possible. - Screening of coarse stones from excavation soil - Screening of stones from mixed soil after demolition. - Feeding clumped soil onto a screening system reduces waste and increases throughput. TSE.083 - the bearings are maintenance-free; the chains should be sprayed with chain spray every 20 operating hours via the maintenance flaps. Dimensions and weight without adapter.

Condition: reconditioned (used), functionality: fully functional, BULA MP133 - Rotary table polishing machine make Bula, model MP 133 for sale Continuously revolving machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 8 workpiece holders mounted in a pitch circle of 600 mm. 3 processing stations, drive power per station from 4 KW, with Bula Quick Lock system of the polishing discs. Ledpfx Ajwvq Ahonxjag Polishing shaft diameter 30 mm für BULA QuickLock Max. disc width 150 mm Max. disc diameter: 350 mm Base area approx. 1900 mm wide, approx. 2400 mm deep, 1700 mm high The machine is completely reconditioned, cleaned, sandblasted, primed and repainted. The BULA MP136 was equipped with new engines, a new gearbox and a new control cabinet. All drives are infinitely variable via frequency converters. Furthermore, the following has been renewed: bearings, belts, screws, hoods, etc. The machine is available immediately. Further technical details and price on request. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 3 high-pressure dosing pistols WIDOBERG HDP-2, brackets, timer, etc. and pressure tank). Picture is just an example !

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension Ljdpezfp S Dsfx Anxeag *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Lodpfxozd Eyns Anxeag Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.