Used Biesse Lower Edge Rounding Unit for sale (37,356)

Condition: used, Year of construction: 2007, functionality: fully functional, power: 320 kW (435.08 HP), total width: 2,780 mm, total length: 3,340 mm, total height: 2,560 mm, Equipment: documentation/manual, Fröling wood chip and pellet boiler "Turbomat" 320 kW Year of manufacture: 2007 Completely overhauled and newly lined with refractory bricks in 2019 Comes with electrical control panel, with the option for automatic error reporting via app. Dimensions: see images Wood chips, biomass, pellets, heating system, pellet heating, carpentry chips, carpenter, joinery, wood shavings, sawdust. Cleaning springs for the heat exchanger base have been removed but are included as new spare parts. Does not include silo discharge system, but does include drop chute and rotary valve. Chimney with induced draft fans, chimney with 35 cm diameter included. Riser flue not included. Has always been maintained and is in good condition. The system can be transported out of the building at ground level. Rjdexb Erfspfx Al Iet No guarantee or warranty.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 121 kW (164.51 HP), volume flow: 7,350 m³/h, nominal heat output: 110 kW (149.56 HP), tank capacity: 1,000 l, fuel: diesel, 10 units of mobile heaters, as new, unused, in original packaging, year of manufacture 2022. REMKO CLK 120 with oil burner and oil tank. Each includes a moisture-resistant thermostat type RT-5. Air distributor head with 2 outlets of Ø 400mm. Each with 2 x warm air hoses, 7.6 m long, including closure strap, Ø 405mm. Single-line extraction set for 1000-liter oil tank. Including quick couplings and device connection hose. Oil tank, diesel tank, heating oil tank, storage tank. Double-walled PE combination tank VET, capacity 1000 liters. Rjdpfxsxgn Dze Al Iet

Condition: used, Year of construction: 2015, functionality: fully functional, - Year of manufacture: 2015 Rjdpfx Alew H Ryue Iet - Made in Bulgaria - Operating manual and CE certificate available TECHNICAL SPECIFICATIONS: – Workpiece height: 8–45 mm – Minimum workpiece length: 100 mm – Minimum workpiece width: 100 mm – Edge thickness: 0.4–3.0 mm – Feed speed: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum workpiece length: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1 x 1.1, 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge cutting unit: – Glue application unit: – Polishing unit - motor power: 2 x 0.18 kW – Polishing unit: 2,800 rpm – Extendable support with rollers: – Extraction port diameters: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions (L x W x H): 4,130 x 1,220 x 1,470 mm – Weight: 1,180 kg

Condition: excellent (used), Year of construction: 2006, Vitoplex 300 105Kw Year: 2006 Type:TX3 Power: 105Kw With gas or oil burner Viewing by telephone only! Preferential sale to dealers, tradesmen or export. Rjdpfxstu Tv Ae Al Ijt All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: used, Year of construction: 2015, machine/vehicle number: 100007528, functionality: fully functional, power: 13 kW (17.68 HP), type of input current: three-phase, total height: 1,700 mm, total length: 9,000 mm, total width: 3,000 mm, Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot Rodpfxoxmi E He Al Ijt NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Delivery can be arrange in the Republic of Ireland

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Rodpey Ipntefx Al Iet - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2022, Colour: White Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 1000053213 - Main motor power [kW]: 7.5 - Software: QUICK OPTI - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4500 - Max. cutting width [mm]: 4500 - Number of feed clamps [pcs]: 6 - Options: Voorritser, Labelprinter, Optimalisatieprogramma - Feed speed: Automatic - └ Max. feed speed [m/min]: 60 Redpfxey In Acj Al Ijt - Scoring unit: - └ Scorer blade diameter [mm]: 200 - Voltage [V]: 380 - Power [kW]: 11.0 - Installed length [mm]: 7600 - Installed width [mm]: 6800 - Installed height [mm]: 2000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2022, total length: 8,000 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 3.969 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000056636 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 Rsdpfoy E Hdgsx Al Iet - Transport dimensions: 8000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3969kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, functionality: unexamined, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, lightly used Biesse CNC machine, model Skill 300, year of manufacture 2011. Taken as a trade-in from a Dutch customer when purchasing a new machine. 3-axis machining center with 6 support beams, milling motor, drilling unit, etc. Automatic tool changer (ISO30) Automatic lubrication Vacuum pump (Becker) Safety mats Remote control Computer (HP) and mobile console Rodpoy Ihu Eofx Al Iet Relatively compact machine, immediately available in Barneveld for loading.

Condition: good (used), Year of construction: 1997, 3-AXIS MACHINE FOR DRILLING AND MILLING OF CABINET FURNITURE PARTS, WITH AUTOMATIC TOOL CHANGER FOR MILLING TOOLS Working area: 2,893 x 950 mm Maximum workpiece height: 65 mm Number of workpiece supports: 6 Number of vacuum cups per support: 2 1 milling motor, 6.8 kW Clearance height between tool holder surface (motor) and top edge of vacuum cup: approx. 250 mm 2 tool changers: 3-position traveling and 4-position lateral Grooving saw fixed in X axis Number of vertical drilling spindles: 10 Number of horizontal drilling spindles: X 2 + 2, Y 1+1 Vacuum pump 100 cbm/h Controller: NC 410 Safety tread mat in front of the machine Rjdpey Iaihsfx Al Iet

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Machining Center Rover 20 Working area 2,893 x 950 mm, Milling spindle with ISO30 tool holder, 3.6 kW, Drilling unit with 10 vertical and 6 horizontal drills, as well as slot saw, 6-position tool changer, Redpfx Alolc Dwns Iet The NC410 control featured a floppy disk drive and color monitor, along with basic, graphically assisted programming capabilities. Additionally, the Rover 20 already supports pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 Located at site Transport available at extra cost

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Rsdoy Ehrxepfx Al Iot Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Redpfx Alow Tivme Ist Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: DA 1580 A 1680 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Rsdpsy H Dzfsfx Al Iet Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: ready for operation (used), Year of construction: 2002, number of axes: 3, total width: 1,500 mm, overall weight: 710 kg, product length (max.): 3,390 mm, This 3-axis BIESSE Rover 24S was manufactured in 2002. It features a length of 3390 mm and an overall width of 1500 mm, with a conveyor speed ranging from 28 to 140 m/min. The machine has a weight of 710 kg and is equipped with a powerful 1.1 kW motor. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover 24S machine we have for sale. Contact us for further details. • Overall width: 1500 mm • Conveyor height: 890 + 940 mm Rsdpfx Ajy E Nydjl Ijt • Conveyor speed: 28–140 m/min • Conveyor drive motor: 0.75 kW • Exhaust fan duty: 5,500 m³/h • Motor: 1.1 kW • Minimum working length: 700 mm • Compressed air connection: 1/2" • Compressed air consumption: tab. 1 • Electric power supply cable section: 4 x 1.5

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg Price: On request - Details: - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rodjyz Ad Iepfx Al Iet Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO Redpfx Asy Af Husl Ist

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Rsdpfx Asyng Agel Ijt Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Rjdpfx Aljyngy Se Iot Max. panel length: 4500 mm Main saw blade projection: 60 mm No of Grippers: 8

Condition: used, machine/vehicle number: 007354, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 240 mm Rsdpoyg Edasfx Al Iot Max feed speed: 40 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: used, Year of construction: 2014, Empty weight: 4.000 kg Price: On request - Machine available from: 2026-01-26 - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system - Table length [mm]: 3600 - Table width [mm]: 1800 - Working range X [mm]: 3765 Redpexr Evlefx Al Ijt - Working range Y [mm]: 1875 - Z-axis working range [mm]: 324 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Empty weight: 2.500 kg Biesse Rover A1536 G FR Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones Rodjwnip Dspfx Al Ist 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Type milling table: Flat table - Tool clamping system: ISO30 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 7 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: BiesseWorks - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Unloading system, Loading system - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 6,900 mm, total width: 2,800 mm, Empty weight: 6.100 kg - Details: - └ Description: Needs repair to B-axis and leaks to seals - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 10333 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 Rodsyr Rnuepfx Al Ist - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 45 - System/software: BiesseWorks - Safety feature: Safety mat, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 200 - └ Oil free: Yes - Tools included: Yes - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (l x w x h) - Transport weight [kg]: 6100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes - CE certificate present: No Rjdpjwnh Avsfx Al Ijt Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, total height: 2,100 mm, total length: 2,000 mm, total width: 2,500 mm, Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - CE marking present: Yes Redpfex Ad R Nex Al Iet - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 975 - Working range Y [mm]: 1321 - Working range Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Software: Biesse works - Saw unit present: Yes - Safety feature: - Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets