Used Boge S20 - 2 for sale (79,062)

Year of construction: 1999, condition: used, Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg Cedjpm Thzjpfx Ab Dorg

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Cedpfx Ajzrd U Hjb Dsrg

Year of construction: 2003, condition: good (used), Capacity: 350 m³/h Crodpfx Abjfl Ig Re Dog

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Crjdpfozl A Rasx Ab Djg Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Cedpfxezfp H Io Ab Djrg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Very well-maintained plate shear from Arboga. Type: MSS 2000-30S Credpfx Absza U Ine Djg Capacity: 2025 x 3 mm Adjustable back gauge Return to sender Rear safety guard

Condition: used, Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm Crsdpeppdh Dsfx Ab Dog -Weight: 25kg

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Crsdpfxox Ih D Hj Ab Dsg

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0381, Offer 25147 Technical Data: - Portable design suitable for CrNi steels - Air flow rate approx. 200 m³/h - Max. negative pressure 19,000 Pa - Filter surface area approx. 0.8 m² - Filter separation efficiency 99.9 % - Extraction connection 60 mm - Extraction hose 5 m Crsdpjxtatzsfx Ab Dsg - Water-cooled torch package with extraction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan: 230 V / 1.1 kW - Required space approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0371, Offer 25146 Crodsxtapiopfx Ab Djg Technical Data: - Portable design suitable for CrNi steels - Air flow rate: approx. 200 m³/h - Max. negative pressure: 19,000 Pa - Filter surface area: approx. 0.8 m² - Filter separation efficiency: 99.9% - Extraction connection: 60 mm - Extraction hose: 6 m - EWM torch package, water-cooled with extraction function: 4 m - Automatic start-stop - Dust drawer - Drive – fan: 230 V / 1.1 kW - Space requirement: approx. W 650 x H 600 x D 250 mm - Weight: approx. 25 kg

Condition: excellent (used), Year of construction: 2012, volume flow: 2.25 m³/h, operating pressure: 10 bar, Boge C 20 F screw compressor Variable speed (inverter) 15 KW engine Codpjukvxujfx Ab Djrg Capacity 2.25 m3/min Pressure 10 bar Year of production 2012 COMPRESSOR FULLY FUNCTIONAL. Compressor in excellent condition.

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW Credpozrh Ecefx Ab Dsg weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Cjdpfx Aonr Nl Seb Djrg Fixed steady Coolant, swarf tray and chuck guard

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Cedpfx Asw T Sc Njb Dorg Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: refurbished (used), Risco 200 litres mixer Product capacity 100 / 150 litres Twin paddle mix arms End door discharge Forward and reverse mix arms Crjdpfx Aszmaahsb Dsg Refurbished condition

Condition: used, Full container of used electric screw compressors for export. Container loading included in the price. Crsdpfx Absw Imvye Deg

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Cjdpfx Ajy Tx Rbjb Dsrg

Condition: good (used), Year of construction: 1993, with oil filtration unit Crsdpfx Ajzvfdksb Djg Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R 2 units available Container for skip loader trucks 20 cubic meter usable volume Technically refurbished Repainted in desired RAL color Side hook connection Discharge door hinged at the top Crsdpfx Abjzt Nirs Deg

Condition: excellent (used), Hoegger FS201A potato masher. approx. 1m x 1.4 m x 1.75 m with tool trolley and all parts. Trolley size 800 mm wide x 650 mm x 1.4 m high. Crsdjxphvpopfx Ab Deg

Condition: good (used), Year of construction: 1990, machine/vehicle number: X0006, Offer 25364 Technical Data: - Punching force: 200 kN - Max. sheet thickness: 6 mm Crjdpfxsx I Nc Ro Ab Dsg - Max. punching diameter: 90 mm - Stroke: 42 mm - Throat depth: 400 mm - Maximum strokes per minute: 200 spm - Installation height: mm - Drive: 400 V / 3 kW - Required space approx.: W 1000 x H 1650 x D 1200 mm - Weight approx.: 1400 kg - Including: positioning table, quick-change punch device, foot switch, emergency stop switch, various punches and dies The machine can be inspected by appointment at the 63322 Rödermark site. Company Erich Mieth: Tel. 06074-90877 Monday - Friday: 9:00 am - 12:00 pm and 2:00 pm - 5:00 pm The price includes 19% VAT. You will receive an invoice with VAT shown separately. Sale to commercial customers only. Payment by bank transfer before collection of the machine.

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm Credpju Nguxefx Ab Dsg revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Year of construction: 1995, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Codpfozvd Tkex Ab Dorg Max. push length: 3000 mm Pneumatic parking brake

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm Csdpfx Ajn Srvysb Dorg -Weight: 170kg

Condition: used, Year of construction: 2003, Swiveling, but not tilting. Saw blade diameter: 550 mm. Bore diameter: 50 mm. Speed: 2800 rpm. Motor with brake: 3.0 kW. Cutting width at 90°: 420 mm. Cutting width at 45° (swiveled): 295 mm. Cutting height at 90°: 200 mm. Weight: approximately 330 kg. Storage location: Nattheim. Csdpfxozd Tiks Ab Dorg