Used Bokö 2005 Mk5 for sale (1,186)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,340 mm, motor manufacturer: Perkins, fork length: 1,200 mm, tire condition: 60 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25-15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25-15, overall weight: 8,150 kg, total height: 3,340 mm, total length: 4,450 mm, total width: 2,000 mm, fuel: diesel, Equipment: cabin, FANTUZZI SF 50U – Side loader forklift TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 4.000 mm Closed height: 3.340 mm Free lift: 900 mm Mast: Standard (2S400) Fork length: 1.200 mm Fork carriage: FEM 4 Drive: 4-Zyl.-Diesel Engine: Perkins Tyres: Luftbereifung 8.25-15 (60%) / 8.25-15 (60%) Gjdoz Aqltopfx An Isug Service weight: 8.150 kg Length: 4.450 mm Width: 2.000 mm Year of manufacture: 2005 Operating hours: 5.125 h Condition: ready to drive EQUIPMENT Heating, Full cabin Internal no.: 1102793 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 8031-010, overall weight: 1,500 kg, rotor diameter: 250 mm, number of blades: 20, total length: 2,150 mm, total height: 1,315 mm, total width: 1,515 mm, rotor width: 800 mm, power: 11 kW (14.96 HP), type of input current: three-phase, feed length X-axis: 800 mm, warranty duration: 1 months, input voltage: 400 V, This VECOPLAN VAZ 100/80 U was built in 2005 and is in very good technical condition. Currently disconnected but fully functional. Gusdpozzcfcofx An Ieg Plug & Play with a 32-ampere plug. Ideal for shredding wood. Various wear parts are available. Please contact us for more information.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 1,650 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, faceplate diameter: 2,000 mm, SMTCL (Shenyang No.1 Machine Tool Works) CW61200 universal horizontal center lathe, year of construction 2005, made in China. The bed ways are in good condition and the machine is in active production use. Technical data: - Faceplate / chuck diameter: 2,000 mm - Turning diameter over bed: 2,000 mm - Turning diameter over cross slide: 1,650 mm - Turning length / machining capacity: 8,000 mm (8 m) Equipment: - 2 x standard steady rest - 1 x heavy-duty steady rest - Digital readout (DRO), retrofitted by us Gujdpfxez Anxqo An Ieg In good working order and ready for immediate delivery.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The baler has been cleaned, functionally tested, repaired, and equipped with a new control system in accordance with EN16500. All spare parts used are original parts from Strautmann. Gjdpozv Thdsfx An Ijug Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: wire Weight of the baler: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors under a roof Includes starter kit with bale strap, 19mm Serial number: 610.01.569 Year of manufacture: 2005

Condition: used, Year of construction: 2005, Overview  The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope  Gujdpfx Anexb Ai Us Ieg - Depalletizer with lift and discharge at the bottom - With intermedeiate layer remover and magzine - With slide for top layer/cover - Enclosed conveyors can pull off single lane wise for shaped bottles - Incl. protective fences, pallet transport, discharge table

Condition: excellent (used), Year of construction: 2005, Excellent technical condition, recently serviced. Cutting length: 6000 mm Saw blades: 420 mm E550 control system Vertical pneumatic clamping Cutting based on external dimensions, without adjustment Gedpfx Aezr Icnsn Ijug Pneumatic angle adjustment from 45 to 90 degrees Cooling system installed Digital angle indicator Saw blade guards that automatically lower and raise.

Condition: excellent (used), Model MAC 2 British Rema Aerosplit dynamic air classifier for high efficiency separation of soft to medium hard dry powders in the 150 - 10 micron size range. Gsdpfx Aozvgklen Ieug Classifier was manufactured in 2005 but was never installed. Machine No. H61802. Installed Power - 11 kW. Airflow - 6,000 m3/hour MAC 2 is now known as the model 450. Can be operated either in an independent air classification system or in closed circuit with a mill. Classifier offered as machine only but can be supplied with ancillary equipment and controls if required. Machine offered in "as is" condition with no warranty given or implied. Inspection invited at our premises in Uttoxeter, Staffordshire. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience, we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), Year of construction: 2005, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: Gjdew Idvwjpfx An Ijug - Welding - Dispensing - Additive Manufacturing Model: KR16 (KR16-2 Foundry option is also available) Condition: Used & Tested Year: 2005 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Year of manufacture: 2005. Includes documentation. The machine is powered on for inspection. Guedpfx Anozxg Ame Ijg

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Guedpsxyzikofx An Ieg Max. drive power - 5.3 kW Quill diameter 50 mm Inner cone MT3 Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: used, Year of construction: 2005, Technical specifications: - Machining area: 2500x1000 mm - Travel range X-axis: 2980 mm - Travel range Y-axis: 1280 mm - Travel range Z-axis: 200 mm Gsdpfxszuxhto An Ioug - Programmable speed in the X-axis: 25 m/min - Programmable speed in the Y-axis: 30 m/min - Programmable speed in the Z-axis: 22.5 m/min - Vector speed: 40 m/min - 16 spindles, 4000 rpm, 2.2 kW (10 vertical and 6 horizontal) - Electric spindle with 6.6 kW, 12000 - 18000 rpm, HSK-63 - Side tool magazine with 7 positions - Footprint (L x W x H): 6970x3000x2680 mm - Weight approx. 3295 kg

Condition: used, Year of construction: 2005, offer consists of: Gedpfx Ajzwk Svjn Ijug long delivery unit LC-20 - weight: 21kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Technical features in the last photo Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267 Gujdpfx Anjy Ud Sgj Isg

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank Gusdpfxjy Hkkaj An Iog - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 500 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Gsdpfxjyi Emye An Isug Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Year of construction: 2005, condition: used, Year of manufacture: Jun 2005 Guodpfx Aswu E Tron Iog New: No Serial number: BP PH 1 ENGINE IS WORKING BUT ONE FAN IS IS STUCK. AND STOPES THE MACHINE NEED REPAIR.

Condition: used, Year of construction: 2005, Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Optical sheet control: Baumer Optronic - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element Guedpfx Anjyhdd Uj Isg - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Godpfx Answ S I Dgo Ijug Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, Perfect PFG60100AHR surface grinder year of manufacture: 2005 magnetic table: 1000 x 600 mm max. grinding area: 1000 x 600 mm variable magnetic force automatic feed Gjdszbrpfspfx An Ijug coolant/filter tank 5 grinding wheels and various grinding stones documentation machine is powered on for inspection

Condition: used, Year of construction: 2005, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x VAC-60Ha, 2x VAC-60Hm, 1x VAC-60Hc Collators - 1x ST-40 - 1x BC-20 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - 24 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm Guodpfezqr I Ejx An Ijg - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Gujdpfx Anozwbxyj Iog Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Year of construction: 2005, condition: excellent (used), Description New blades and counterblades Gedpfezwwdxex An Ieug with suction HS-40/SL-SP Specifications Manufacturer TRIA Model BM 50-30 Year 2005 Condition Used Stock Number AI2182

Condition: used, Year of construction: 2005, Sewing machine Meccanotecnica Aster 220 SAO Year: 2005 Description: - Colour monitor with touch screen - Pre-loader - Feeder - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Gusdpfx Anjzbbm Te Ieg - Excluding pump Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Folding machine MBO K 800.2/4 SKTL MWK Year: 2005 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder - Excluding pump Folding unit MBO K 800.2/4 SKTL MWK - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Buckle fold underneath first cross fold Guedpetczixofx An Ijg - Second cross fold to the left - Second cross fold to the left and right - Noise hood over the entire folding section - Excluding delivery

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. Gjdpfozwbx Tex An Isug I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.