Used Caterpillar 352 Mit Ce Und Epa for sale (22,264)

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2026, Equipment: ABS, 3-axle timber transport semi-trailer * 8x OptiPa bolster beams * 16x OptiPa aluminum side posts, one-piece * Sturdy aluminum front bulkhead, approx. 2500 mm high * Maximum saddle load approx. 12,000 kg * Front overhang (kingpin to front edge of the kingpin plate) 1550 mm * Air suspension with 3x 9-ton axles from SAF * Axle reinforcement for off-road use * Axle lift for the first axle, automatic function, with start-up assistance * Weighbridge * Technically possible total weight 39,000 kg * WABCO Smart-Board * EBS braking system * All lines are protected and routed inside the longitudinal beams * Smooth sheet metal covering 3 mm, welded between the longitudinal beams * Tires: 6x brand-name tires, size 385/65 R 22.5 Guedpsi Rtgqefx Al Asd * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Underrun protection made of round tubes, mounted as high as permissible * Shunting coupling at the rear * Ten welded ring elements for lashing, per side * 2x toolboxes approx. 600x400x400, plastic * Side impact protection, aluminum, anodized * KTL coating with zinc phosphating, highest level of corrosion protection Also available for short-term rental. Further information upon request.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Gujdpox A Nntefx Al Ajd Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: used, maximum load weight: 29,900 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 04/2009, loading space volume: 45 m³, Year of construction: 2009, Equipment: ABS, * Feldbinder 3-axle tipping silo with compressor and tipping hydraulic system * Volume 45m³ * Air suspended Guedpfjwqmddsx Al Ajd * Lifting axle * SAF axles * Alloy wheels * EBS * ABS

Condition: used, power: 14 kW (19.03 HP), Year of construction: 2004, operating hours: 1,000 h, Equipment: all wheel drive, * Municipal vehicle * Creep gear * Differential lock on rear axle * Front axle can be switched on * 6-speed ----Construction: 3 cylinder diesel engine, 855 cc/14 KW, 6 forward/2 reverse gears, max. 14 km/h. Rear power lift, rear PTO, PTO speed 540/840/1000 rpm. Accessories: HW 160 Z hay tedder, year of manufacture 2016, weight 95 kg Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice). Gsdpfx Ajtkb I Uel Ajud

Condition: used, mileage: 1,001 km, power: 9 kW (12.24 HP), gearing type: mechanical, fuel type: gasoline, color: red, number of seats: 1, first registration: 01/1981, Year of construction: 1981, driver cabin: other, Equipment: hydraulics, Vehicle location: Bovenden, Superstructure: with snow blade and chains, rear hydraulics, PTO engine Intermotor license Lombardini, speed levels 3, approx. 331 operating hours, Including sweeping brush and salt spreader! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Gsdpfjvhhmcjx Al Ajud

Condition: used, mileage: 282,000 km, power: 110 kW (149.56 HP), first registration: 07/2021, fuel type: diesel, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Viewing by appointment by telephone. Gsdoziwc Sjpfx Al Ajud

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. Guodei Ri Hropfx Al Asd 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: used, mileage: 590,000 km, power: 265 kW (360.30 HP), first registration: 08/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, MAN TGS 26.360 | Tanker Truck | 3 Compartments – Top and Bottom Loading | Steering & Lift Axle VEHICLE HISTORY - German vehicle - Single owner - Video available upon request VEHICLE EQUIPMENT MAN TGS 26.360 Automatic transmission Year of manufacture: 2009 ENGINE / DRIVE TRAIN - Engine power: 360 HP Gujdpfx Aleylflzs Aod - Engine brake - Cruise control - Hill start assist AXLES / SUSPENSION - Lift axle - Steering axle - Front axle: leaf suspension - Rear axle: air suspension TYRES - Tyre size: 315/80 R22.5 - 1st axle: 315/80 R22.5 - 2nd axle: 315/80 R22.5 - 3rd axle: 315/80 R22.5 SAFETY / ASSISTANCE - Reversing camera BODY - Speyer tank body - 3 compartments - Bottom loading - Top and bottom loading TANK CAPACITY / VOLUME (3 compartments) - Compartment 1: 7,260 litres - Compartment 2: 4,010 litres - Compartment 3: 7,320 litres TECHNICAL EQUIPMENT - PTO (power take-off) - Printer for tanker truck - Trailer hitch COMFORT - Air conditioning EXPORT SALE ONLY WITH DEPOSIT (MIN. €500 – €2,000) EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 EXPORT DECLARATION / CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER), 5-DAY, 30-DAY PLATES, AND 17-21 DAY AUSTRIA PLATES EURO 1 VEHICLE RESERVATIONS ONLY THROUGH EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. For sales to EU & third countries, a deposit/guarantee of at least €500.00 / €1,000.00 is required. Subject to changes, errors, and prior sale! More vehicles can be found on our homepage. Sale exclusively according to our Terms & Conditions – see our homepage. Important information: Despite careful checks of all details in our offer, errors may occur. Some may result from data transmission errors on various platform providers. Thus, all details are provided without guarantee and do not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. It is information for the initiation of a contract. All information here is provided without guarantee and does not represent warranted characteristics.

Condition: used, maximum load weight: 7,618 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 11/2020, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 250 mm, total width: 2,550 mm, total height: 3,020 mm, Humbauer tandem axle trailer with 2 axles and ramps Gedpfx Aloy Unvce Ajud Type: HS 105020 BS Payload: 7618 kg Material: Aluminum Brakes: Drum brakes Axle: SMB 3x support points 2x ramps (length: 2.30 m and width: 0.45 m) Length: 5.00 m Width: 2.00 m Height: 0.25 m We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: used, maximum load weight: 22,350 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 08/2002, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Schwarzmüller Jumbo Gooseneck Trailer (Chassis No. 201) Registration Date: 08/01/2002 Type: SPA-2/ZJ 29,000 kg Unladen weight: 6,650 kg Payload: 22,350 kg Overall length: 13,850 mm Overall width: 2,480 mm Overall height: 4,000 mm TÜV (technical inspection): 11/2026 Fixed front wall Curtains on both sides Edscha Gujdpfxszbpdae Al Aod Joloda flooring with locking clamps across the width Tie-down points in the floor, on the sides and at the rear Folding side panels Air suspension with lifting and lowering function Aluminum bulkhead Gooseneck approximately 4,000 mm long and internal height approximately 2,670 mm Low-bed approximately 3,000 mm high and 9,700 mm long internally Portal doors, 1/2 and 1/2, at the rear Forklift tine holders Air suspension 1st axle: Lift axle SAF axles Tires: 235/75R17.5, approximately 50/50% tread remaining, twin tires 2 x wheel chocks 2 x 12-ton, 2-speed geared winch Price: €8,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total width: 4,500 mm, total length: 4,500 mm, input voltage: 400 V, working width: 2,000 mm, cutting width (max.): 2,000 mm, We offer a camera-assisted CNC cutter for single-layer cutting of textiles and leather. With the integrated image processing system, shapes and designs can optionally be recognized and cut with precision. The machine has low operating hours and is in perfect working condition! Godpeyx I Dusfx Al Ajud

Condition: used, mileage: 1,200 km, power: 18 kW (24.47 HP), first registration: 01/2018, fuel type: diesel, overall weight: 2,000 kg, color: orange, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 1,200 h, Equipment: air conditioning, cabin, , diesel First registration 02.01.2018 18 kW cubic capacity 1,261 cm³ 1,200 operating hours Front loader Front hydraulics Front PTO Hydrostat Cab air conditioning 1 seat Rear PTO Shovel Front loader permissible total weight 2,000 kg The vehicle had a special purpose registration on 23.11.2017. FOR US THE CONDITION AND THE FEEL OF THE VEHICLE ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Godpfx Aovicvhel Asud

Condition: good (used), Approx. 3,000 units, Rotho boxes 40x30x22 cm with lid and 60x40x30 cm without lid - used - : Price for the entire lot ex location: €5,500 (net)! Sale only as a complete lot! Gsdpfxsyr Hm To Al Aoud Small with lid Large without lid Manufacturer Rotho Rotho Year of manufacture - - Type - - Dimensions 40 x 30 x 22 cm 60 x 40 x 30 cm Internal dimensions 36 x 26 x 21 cm 56 x 35.5 x 30 cm Quantity 2,000 pcs 1,000 pcs Quantity per pallet 64 pcs 20-24 pcs Condition The condition of the containers may vary. There may be signs of use, such as worn corners. The interiors are clean, as they come from production. The exterior surfaces may have adhesive residue from labels. Available: immediately Location: 79677 Schönau, Germany • Small containers with lid (dimensions: 40 x 30 x 22 cm); quantity approx. 2,000 pcs.

Condition: used, functionality: fully functional, Year of construction: 2005, color: red, overall weight: 16,000 kg, maximum load weight: 13,000 kg, empty load weight: 3,000 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,460 mm, machine/vehicle number: 04851, BDF Steel Swap Body / Swap Container 7.45 m with Roller Shutter * Swap container / steel box with profiled external walls * Craneable and stackable * Aluminum roller shutter – fully refurbished Gsdpfx Aljwtqt Is Asud * Keyhole rails * Laminated plywood floor, suitable for forklift traffic * Forklift pockets and upper corner fittings * Support legs not height-adjustable * Parking height: 1.32 m * Internal loading height at roller shutter: 2.20 m * Technically in very good condition Rental from just 1 day, long-term rental possible! We always have larger quantities from various manufacturers and in different versions available for sale or rental! Delivery possible throughout Germany!

Condition: used, functionality: fully functional, machine/vehicle number: WMAL260184G134421, mileage: 308,000 km, power: 114 kW (155.00 HP), first registration: 11/1998, fuel type: diesel, tire condition: 90 %, fuel: diesel, color: green, gearing type: mechanical, Year of construction: 1998, Equipment: all wheel drive, crane, truck registration, Well-maintained, dry three-way tipper with crane and remote control, timber grab and clamshell bucket for bulk goods. Like-new tractor tires for off-road use. Gedpszb I Ahefx Al Ajud Subject to prior sale – all information is without guarantee. The accuracy and completeness of the information provided here cannot be guaranteed. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement will be exclusively the motor vehicle in its actual condition.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit Guodpfx Ash Eyd Rel Aod pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² Gedpei Dtb Usfx Al Ajud BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) Gjdped Sg I Isfx Al Aeud OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: used, mileage: 89,000 km, power: 110 kW (149.56 HP), first registration: 06/2022, fuel type: diesel, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Inspection of the temperature-controlled container (for blood transport) is possible by prior telephone appointment. Gujdpfx Aloy Tr Duj Asd

Condition: reconditioned (used), Cutter Grinder Make: harich (Deckel) Gjdpfxsx A U Rgo Al Ajud Model: SSM (S0E) Refurbished with CE certification with warranty Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual incl. new machine electrics according to current safety regulations incl. new circuit diagram incl. CE documentation incl. CE labelling incl. CE Declaration of Conformity

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Godpfxjx A T Evj Al Aeud Geometric inspection with test protocol with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Gujdpovfdatefx Al Aod Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal milling machine Manufacturer: Harich (DECKEL) Model: B (FP 2) Overhauled and CE-certified Geometric inspection with test report Includes warranty Accessories: - 3-axis digital display FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety features: Guedpfxjdvdcze Al Ajd - New machine electrical system with control cabinet - Electronically monitored safety cover on the vertical milling head - Tool holder guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start, and stop buttons - New documentation for the machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal tool and cutter grinding machine Manufacturer: Harich (DECKEL) Model: A (FP 1) Gusdodvdc Iepfx Al Ajd Overhauled and CE certified Geometric inspection with test report Comes with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety features: - New machine electrical system with control cabinet - Electronically monitored safety guard on the vertical milling head - Chuck guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start, and stop buttons - New documentation for the machine and control cabinet - CE declaration of conformity

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Gusdjvictmepfx Al Aod