Used Convotherm Combi Steamers for sale (1,236)

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Dedew S Tyajpfx Apbocn

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m Djdoz Ipqpepfx Apbecn All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), overall weight: 4,800 kg, Used for steaming pasta and other food products. Excellent condition, available for immediate loading. Dcsdpjxxd Imsfx Apbsn

Condition: used, continuous grilling line all stainless steel bottom contact grilling + top hot air suitable for steam injection useful width conveyor 900 mm belt width 1.000 mm net length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C Dcsdpsz Ixw Eefx Apbjn belt washing system/hot water ± 60°C (operational supply) adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm new Teflon belt

Condition: good (used), Year of construction: 2015, Metos Viking Combi 300EM Mixing Kettle Dodeyzingepfx Apbocn 2015, Stainless, 300L cooking kettle, electrically heated, 41.5Kw, variable speed and temperature controls, guarded lid, tilt to discharge, 3Ph

Condition: good (used), Houno Combi oven Stainless oven, touch screen controls, programmable recipes with timer and temperature controls, seven tray, tray dims 530mm x 320mm, with Brita purity steam unit, mounted on stainless rack, 3Ph Dodjx Ebh Dopfx Apbecn

Condition: used, mileage: 677,247 km, power: 110 kW (149.56 HP), first registration: 01/2019, fuel type: diesel, next inspection (TÜV): 10/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, * 6,900 € NET * Skoda Superb 2.0 TDI SCR DSG Active Combi, Panoramic Sunroof, Leather, Navigation, PDC, Euro 6 * Seats: 5 (2+3) * DSG Automatic Transmission * Radio CD * Light Sensor * Lane Keeping Assist * Lumbar Support * High Beam Assist * Leather Steering Wheel * Electric Seat Adjustment * Seat Adjustment with Memory Function * Panoramic Sunroof * Driver Fatigue Warning * Navigation System * Touchscreen * Traction Control * Automatically Dimming Interior Mirror * Speed Limiter * Front, Side, and Additional Airbags * Cruise Control * Ski Bag * Distance Warning Dcedpfez I Ibgox Apbsn * Heated Seats * Automatic Climate Control * Hands-Free System * Multifunction Steering Wheel * Shift Paddles * On-Board Computer * Hill Start Assist * Bluetooth * Rain Sensor * Speed Limiter * Tire Pressure Monitoring * USB * Emergency Call System * Emergency Braking Assist * Electric Windows * Electric Mirrors * Electric Tailgate * Central Locking * Tire Pressure Monitoring * Traction Control * Touchscreen * Isofix * ABS * ESP * Traffic Sign Recognition * Start/Stop System * Roof Rails * Alloy Wheels * Fog Lights * LED Daytime Running Lights * LED Headlights * Parking Assist Front + Rear (PDC) * Full Leather * Wheelbase 284 cm * Unladen Weight 1482 kg * Payload 699 kg * Weight 2181 kg * Passenger Car Registration * Vehicle No. 18 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT DETAILS Telephone: WhatsApp E-mail: Transfer and customs license plates (export number) available from us. Errors, typos, and prior sale are reserved. Technical specifications and equipment features must be checked separately. The condition according to the contract is only that which is inspected on site and confirmed in writing upon conclusion of the purchase. We kindly request you to arrange an appointment.

Condition: excellent (used), 889 USED Combi steamer oven Merrichef. TECHNICAL DATA: Dcodpfx Aotxbdmspbsn - max power: 5.3 kW EXTERNAL DIMENSIONS (in cm): - width 56 - length 57 - height 53 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Type Combi 12110 TF continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1.100 mm net length 11.000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : ± 13.500 x 1.700 x 2.400 mm independent platen – air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (± 600 kW) with belt wash system Dcsdpez Hkhyofx Apbon

Condition: like new (used), Miwe Combi Backofen with stonefloor and convection oven and steam function in very good working condition if you have further questions please sent an request! Dcsdpfx Apsumm N Nsbon

Condition: used, Year of construction: 1996, functionality: fully functional, conveyor belt length: 10,800 mm, conveyor belt width: 600 mm, conveyor belt speed: 750 mm/s, total length: 10,800 mm, total width: 850 mm, total height: 370 mm, overall weight: 350 kg, power: 0.75 kW (1.02 HP), input frequency: 50 Hz, motor manufacturer: LENZE, Manufacturer: Combi-Staufner-Technik Year of manufacture: 1996 Overall dimensions (L x W x H) in mm: 10,800 x 850 x 370 Width including side rail in mm: 720 Width including drive in mm: 850 Side rail height in mm: 140 Conveyor length in mm: 10,800 Conveyor width in mm: 600 Belt type: PVC, textured Belt width in mm: 600 Support structure: None (available as an option) Running surface: Steel Drive: Head drive Motor type: Geared motor Motor specifications: LENZE, 0.75 kW, 50/60 Hz Motor position: Right side in the direction of conveyance Conveyor speed in m/s: 0.75 Net weight in kg: 350 Special features: Condition: used / fully functional Dodpfszunuiex Apbocn Functional test: OK

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm Dcsdpfez Eimfjx Apben • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: used, Year of construction: 1996, functionality: fully functional, conveyor belt length: 10,370 mm, conveyor belt width: 650 mm, conveyor belt speed: 600 mm/s, total length: 10,400 mm, total width: 820 mm, total height: 300 mm, overall weight: 200 kg, power: 0.75 kW (1.02 HP), input voltage: 220 V, input frequency: 50 Hz, input current: 2 A, motor manufacturer: LENZE, Manufacturer: Combi-Staufner-Technik-GmbH Year of manufacture: 1996 Overall dimensions (L x W x H) in mm: 10,400 x 820 x 300 Width including sidewall in mm: 720 Width including drive in mm: 820 Side rail height in mm: 105 Conveyor length in mm: 10,370 Conveyor width in mm: 650 Belt type: PVC, smooth Belt width in mm: 650 Dedpjzun Ddjfx Apbocn Running surface: Sheet metal Drive: Head drive Motor type: Geared motor Motor manufacturer: Lenze Motor specifications: 0.75 kW, 50 Hz, 2–3.5 A, 220–480 V Motor position (in conveying direction): left Conveying speed in m/s: 0.6 Net weight in kg: 200 Condition: used / fully functional Functional test: OK

Year of construction: 2013, condition: good (used), Steam convection oven, Rationa SCC WE 202 convection oven The unit is in like-new condition. * For 40 GN trays * 65.5 kW Djdpfx Aoz E Dfvjpbecn * Steam cooking mode from 30°C to 130°C * Regeneration function * Convection / dry heat: temperature range between 30°C and 300°C, 0–100% maximum humidity. * Probe * Automatic cleaning with tablets

Year of construction: 2015, condition: excellent (used), Hobart high speed steamer Dcodpofv Spcsfx Apbsn Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

Condition: used, functionality: fully functional, conveyor belt length: 3,870 mm, conveyor belt width: 650 mm, conveyor belt speed: 75 mm/s, total length: 3,870 mm, total width: 840 mm, total height: 300 mm, overall weight: 200 kg, power: 0.75 kW (1.02 HP), Equipment: type plate available, Manufacturer: COMBI-STAUFNER-TECHNIK Year of manufacture: 1998 Overall dimensions (L x W x H) in mm: 3,870 x 840 x 300 Width including side frame in mm: 720 Width including drive unit in mm: 840 Side wall height in mm: 100 Conveyor length in mm: 3,860 Conveyor width in mm: 650 Belt type: PVC, smooth Belt width in mm: 650 Support structure: none (available as an option) Running surface: Steel Drive: Head drive Motor type: Geared motor Motor specifications: Lenze, 0.75 kW, 50/60 Hz Dodpfx Apezipqusbjcn Motor position: On the left in the direction of conveyance Conveying speed in m/s: 0.75 Net weight in kg: 200 Condition: second-hand / fully functional Functional test: OK

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Dsdpfx Aoz Exv Njpbocn Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Dcodpfx Apez Az Iasbsn Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: good (used), Year of construction: 1982, functionality: fully functional, year of last overhaul: 2002, type of input current: three-phase, For high-temperature dyeing of fabrics (e.g. polyester, mixed fiber materials) Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Max. temperature: 140–144 °C Pressure: approx. 3 bar (3 kg/cm²) Heating: steam heated Bath volume: 9170 liters Material capacity: approx. 300 kg (typical) Dodpjfqmx Tofx Apbscn Useful working width: 2000 mm Fabric roll diameter: 1100 mm Cylinder diameter: 324 mm 2 main driven cylinders (reciprocating) Dosing system (for chemicals) Additive tank Automatic program control Temperature and pH control

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine Dsdpfxjzvm Hae Apbjcn including stops READY FOR USE

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Wiesheu EBO 60x80 Combi Oven Year 2017 Dodpfx Ajp Sr N Rjpbscn - Euromat 64 L 2600-A-FBBBCBAA - Ebo 68 M X1625-A-BBADA

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production System consists of Dcsdpfx Apozhk Avobon 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories

Condition: used, functionality: fully functional, Used Seewer Rondo Kombi rolling machine. Dcsdezyngispfx Apbjn

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 8 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.17 to 1.43 m³/min at 6 bar (g): 0.17 to 1.35 m³/min at 7 bar (g) : 0.17 to 1.25 m³/min at 8 bar (g) : 0.17 to 1.16 m³/min at 9 bar (g) : 0.17 to 1.07 m³/min at 10 bar (g) : 0.17 to 0.98 m³/min at 11 bar (g) : 0.17 to 0.89 m³/min at 12 bar (g) : 0.16 to 0.83 m³/min at 13 bar (g) : 0.16 to 0.75 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/42-230 V / Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 350 kg Dodpfx Aexqn Afjpbecn Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2017, condition: good (used), Lillnord Combi Room refrigerated chamber - used - year of manufacture 2017 - freezer room for 18 pallets, 60 x 80 (minus 18 degrees Celsius) - refrigerated room for 4-5 pallets, 60 x 80 (plus 6-8 degrees Celsius) - disassembled and stored in a warehouse - good technical condition - external cladding made of stainless steel Dcedpfx Apjzn Iylsbon - internal cladding painted - collection from the warehouse - price on request