Used Depaneling System For Printed Circuit Boards for sale (47,431)

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SYSTEM ATBF170, The burger forming machine (for burger products with a diameter of 38 - 170 mm and a height of 7 - 30 mm) including the UNIVERSAL CONVEYOR BELT UTV-200/1500 was newly purchased in 2021 as a backup for an identical machine already in use. It was only set up and then operated for just one day. Therefore, the machine is practically new and ideally suited for producing patties, oval, round, or square-shaped nuggets. The forming machine is fed by a vacuum filler, which is not included in the price. The machine is currently set to a capacity of 3,000 patties in an 8-hour shift. It can most likely handle even more. - Pneumatic operation - Ejection plate with water spray system - Synchronous control, 24 V connection - Compressed air: 10 m³/h, 6 bar - Portioning output: approx. 100 portions/min. (product-dependent) - Includes 1 base frame - Without forming insert - Without ejector - Ejection: one-way UNIVERSAL CONVEYOR BELT UTV-200/1500: with additional adapter Connection voltage: 1 x 230 V AC Connection power: 0.5 kW Rated connection frequency: 50 Hz Bwedszhnwdopfx Al Aeu Length: 1500 mm Width: 200 mm

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Bodpfxsxcivqe Al Aewu Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: used, Veolia Water System Bjdpez Ic T Refx Al Ajwu

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Bsdpfowufb Aex Al Aewu Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Ready to ship worldwide

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Please contact us to get a hold of this machine for a super discount price! Bwodpfx Ajd Tfiujl Aju

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11105234, TECHNICAL DETAILS Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Maximum reach: approx. 2101 mm Position repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Ambient temperature for storage & transport: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air chiller Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Bodpfxjyvzuhj Al Aswu Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Wrist protection rating: IP65 / IP67 (IEC 60529) Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled state at the previous operator.

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling Bsdpfx Asu Rwauel Ajwu - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 Bjdpfxox Tg Axe Al Aewu 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). Bsdsxuhw Dspfx Al Aewu ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment Bodpjyc H N Nefx Al Aswu • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis. Bwedpfjy I Nugox Al Aeu

Condition: excellent (used), The highly flexible plastic chain conveyor systems with aluminum guide rails enable the horizontal and vertical distribution of products. Quantity: 600 m Bwedpfx Alof D Hfme Aju Available in various sizes. We also manufacture custom lengths!

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. Bwedpfx Aley An I Ie Asu 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 150 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 150 kg Lift (arms): 1,500 mm MACHINE DETAILS Number of magazines: 2 Bodpfxsyfuwgj Al Aswu Capacity per magazine: 12 pallets EQUIPMENT 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZS 260-125 A 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZU 170-60 Zero-point clamping system System 3R GPS 240

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition Bodpfxoq Nf U Es Al Aewu A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 Bedpfx Aljzyu Nqe Ajwu • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps. Bwsdpfxsq T N T Te Al Aeu

Condition: like new (used), Year of construction: 2022, Sunthinks HP Onepass digital printer is highly cost-effective printer specially designed for printing on corrugated cardboard. * Model: Sunthinks SC1290 * Printhead type: HP heads (6 pcs) * Maximum resolution 1200x300DPI; 1200x600DPI; 1200x1200DPI * Printing speed 5/15/30 meters per minute * Print size 1290mm * Sheet size 2500x9999 Bedpfxou T I Npj Al Aswu Printer is almost new. Available immediately directly from owner!

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each) Bwedpfxju Ibhws Al Aou  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: new, Year of construction: 2026, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Bedpsvt Uvzefx Al Aowu Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation Bodoyc H R Tspfx Al Aowu • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04111010, We offer this very good Albo System AB AS1000 pile turner, year of construction 2005. Manufacturer: Albo System AB Model: AS1000 Construction year: 2005 Condition: very good Category ID: 672 Type: Pile turner Bodpjzu R Tnsfx Al Ajwu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, 2020 DMG Mori Robo2Go Robot Automation System Bwodpfxoz Dg R Se Al Aju Working Range Ø25-Ø125mm, Length 50-250mm. With Fanuc Robot M20iA 6 Axes, Payload 20 kg (Standard Base Model; Variants Range From 10-35kg, Reach 1,811mm. Repeatability ±0.08mm. Robot Mass 250kg. S/No. R2G-171201.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Bjdpfjxu Ewzsx Al Aewu Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Bwodpfx Alezkucfo Aou Errors and prior sale excepted.