Used Deratech Ultima Plus 160/4100 for sale (11,373)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION Fgedpfjzzhfujx Aggjg * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: used, Technical details: Total force (nominal): 1000 to Fsdpfxjzx Rmvo Aggjgg Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, 0602700 Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, 0603100 Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-axis robot, manufacturer

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags Fgjdpex N Icxjfx Aggeg • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Fgjdjzyay Ijpfx Aggjg Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine Fodpfxszw T Dne Aggsgg This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) Fgodoyhkquspfx Aggeg - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: good (used), Polar Mohr N 78 Plus Paper Guillotine Machine serviced and ready to work. Like new. Manufactured in 2018. Technical specifications: Cutting width: 780mm Stack height: 120mm Fgsdpfx Agjzw Ty Ajgjg 21.5″ LCD display 400V power supply Weight: 1400kg Enlarged side tables. Chrome table surface Table lighting and optical cutting line Continuously adjustable clamping force Additional rear table guards. Spare knife, cutting sticks, tapping block, and operating tools.

Year of construction: 2022, condition: used, Serial number: 47841 HANDTMANN Filling Machine, * Performance: - Filling capacity: up to 2,000 kg/h - Portioning/tying capacity: up to 400 portions/min - Portioning range: 5 to 200,000 g - Filling pressure: up to 25 or 40 bar Length: ~1,000–1,200 mm Width: ~1,100–1,220 mm Height: ~1,750–2,040 mm Weight: ~475 kg Fedpfx Aezz Iuieggsgg With accessory cart Online auction held following the closure of the Umiami research and development center in Villebon-sur-Yvette (91), which was dedicated to the development of plant-based food products under the "Swap Food" brand. This auction includes over 100 lots, notably featuring state-of-the-art laboratory and process development equipment: “Anton Paar” particle size analyzers and rheometers, a “Stable Micro Systems” texturometer, “Dohmeyer” cryogenic cabinets, “Hounö” and “Unox” ovens, a “Mettler Toledo” metal detector, an “Anritsu” checkweigher, "Sartorius" thermobalances, as well as numerous food preparation appliances, laboratory equipment, stainless steel furniture, shelving, computer equipment, and technical equipment. Auction organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Fgedezw T A Rjpfx Aggjg Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Fedszvyuqopfx Aggegg Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was used during the development of a vertical wind turbine and operated for a few hours before this development phase was discontinued. The switchgear cabinets were coordinated or assembled with the generator by a professional company in Offenburg. I would be glad if the equipment could be put to new use. Price negotiable upon collection. Fgodpfxjyl Nnto Aggjg

Condition: excellent (used), For sale is an industrial KSB ETABLOC-G 50-160/1102 G4 centrifugal pump integrated with an 11 kW KSB / Klein, Schanzlin & Becker AG electric motor. The pump is used, inspected, and in working order. It features a robust industrial design and is suitable for water, circulation, and process applications. It shows normal signs of use and storage, as visible in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 50-160/1102 G4 Serial No.: 5-927-220892 / 1 Flow rate Q: 20–80 m³/h Head H: 45–38 m Rotational speed: 2900 rpm Year of manufacture: 1993 Fsdpfx Ajzvyyaeggsgg Design: block centrifugal pump Connections: flanged Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: RF 11/2-75 Power: 11 kW Power supply: 3-phase Voltage: 380 V Current: 22 A Frequency: 50 Hz Speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: F Condition: Used, inspected, and fully functional. Normal signs of use and storage appropriate for the age of the device. Weight: approx. 120 kg The sale includes the complete pump with the electric motor, exactly as shown in the photos.

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Motor specifications: • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible. Fsdpszva Azefx Aggjgg

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm Fgsdpfozrm Uiox Aggsg - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Year of construction: 2026, Carrying capacity: 38.370 kg GVW: 11.130 kg Technical condition: very good Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax Plus Year of build: 2026 Condition: New Data: Equipment: BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steerable. 3rd axle with electro-magnetic reverse lock via reverse gear and manually activatable. Technical axle load: 12,000 kg. Single-coat sand coating on the cover plates of the gooseneck as well as in the transition areas between the neck and the lifting bed, between the lifting bed and the loading surface, and between the loading surface and ramps. 1 spare wheel with mounting adapter under the loading surface on the right in front of the axles. Cutouts in the outer frame of the loading surface and the lifting bed for hooking in tension straps (LC 2,000 daN). Total dimensions LxWxH: 9,60 x 2,54 m Number of axles: 3 Payload: 38.370 kg Empty weight: +/- 11.130 kg Fjdpjzdizijfx Aggogg Total permissible weight: 49.500 kg Information: sample images Information: Location: Essen immediately available.

Condition: excellent (used), For sale: a used industrial centrifugal pump, KSB ETABLOC-G 32-160/302.2, with a 3 kW electric motor. The pump has been inspected and is fully functional. It is in used condition, with visible signs of wear, paint defects, and localized surface corrosion. The detailed condition of the unit is shown in the photos. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-160/302.2 Serial number: 0-118-631 703 Flow rate: 4–29.3 m³/h Head: 36.3–23 m Rotational speed: 2900 rpm Year of manufacture: 1990 Pump weight: 42 kg Motor technical specifications: Fedpfx Agozvhxkegsgg Manufacturer: KSB Type: ZKA 100L2 Identification number: 0533496 Motor number: 585957 Power: 3 kW Power supply: three-phase Voltage: 380/660 V Current: 6.3/3.6 A Frequency: 50 Hz Rotational speed: 2860 rpm Protection class: IP54 Insulation class: B cos φ: 0.89

Condition: excellent (used), For sale: an industrial KSB centrifugal pump, model EB 32-160, equipped with a 4 kW electric motor. Pump specifications: • Manufacturer: KSB – Klein, Schanzlin & Becker AG • Type/Model: EB 32-160 • Pump number: 0-118-886 021 Fgsdpfx Aezvat Tjggjg Motor specifications: • Motor number: 3358128-021 • Motor type: AF 112M/2A-11 • Power: 4 kW • Voltage: 380 V • Rotational speed: 2870 rpm • Current: 8.1 A • Frequency: 50 Hz • Protection class: IP54 • cos φ: 0.89 The pump and motor were likely refurbished and inspected by a specialized service in 2024, as indicated by the stickers from Elektromotoren Reparaturwerk ROCK and the 2024 inspection marking. The pump has been inspected by us and is in working order. Used condition. The exact condition of the unit is shown in the photos.

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: Fgodjzm I Dhjpfx Aggsg • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: used, functionality: fully functional, machine/vehicle number: 3910010947, counter reading (black): 3,310,691, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 4100 Press” Fgjdpfxszmpbnj Aggjg Items for sale: 1 x Xerox Versant 4100 Press with the following specifications: incl. Paper Deck A-CF03/A-CF04 incl. Finisher A-GW04/A-GW07 Includes Stacker LCS-1 Includes SquareFold Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 9,571,697 pages Colour: Approx. 8,874,258 pages Black: Approx. 697,439 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Pilous ARG 235 Plus Horizontal Bandsaw, Includes 4500mm x 800mm Infeed Roller Conveyor and 1300mm x 800mm Outfeed Conveyor. S/No. 123/19/0043. Country of Origin: Czech Republic Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Fedpfx Ajzn Uwdeggegg Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Industrial centrifugal pump KSB ETABLOC-GN 32-160/402 with a 4 kW electric motor for sale. Fjdpszvdgdofx Aggjgg Pump data: • Manufacturer: KSB • Model: ETABLOC-GN 32-160/402 • Design: GN11 • Identification number: 48861781 • Pump number: 5-925-204031/1 • Flow rate: 17.5–32 m³/h • Head: 37.5–26 m • Pump speed: 2900 rpm Motor data at 50 Hz: • Motor type: QU FA 112M2A-60 • Motor number: 146233 RU • Power: 4 kW • Power supply: three-phase • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Duty cycle: S1 • Motor weight: 29.1 kg

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: ET1PA23085067157, This is a Rational Ultravent Plus hood, type UV PLUS 61/101/E, manufactured in 2023. It is suitable for the following Index series: Index H and I, as well as for DUO units or individual appliances. This hood not only captures escaping vapors but also eliminates odors and smoke. No external exhaust duct is required. An LED lamp automatically indicates when the filter needs to be replaced. This version features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter, which is the core component of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be ideally used in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC 61/101 WE units can be carried out with minimal effort. The hood has been tested in our in-house workshop, and new activated carbon filters have been installed. Fully functional with a 6-month warranty. Immediately available. Recommended retail price: approx. €9,669.94 gross. Our special price: €4,998 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service center throughout Germany. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts without installation or removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested and fully functional – or your money back. * Flexible shipping or self-collection options. * Competent advice – before and after purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: approx. 854 x 1226 x 628 mm * Minimum door opening dimensions for transport W x H: 845x850mm * Serial number: ET1PA23085067157 * Year of manufacture: 2023 * Power connection: V: 200 - 240 / Hz: 50-60 * Weight: approx. 95 kg Condition: Used, tested, fully functional. Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Fedpfx Aszu Sdhjggsgg Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Fjdpfjyxqzvox Aggsgg Cnc control: ByVision touch screen

Condition: used, This listing is for Zeta Plus 16NZA Encapsulated Filter System The unit is in full working condition and ready for immediate use. This high-performance, single-use depth filtration asset provides reliable fluid clarification and impurity removal for pharmaceutical and bioprocess laboratory operations. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Fodjzqf Daopfx Aggjgg Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" Fjdpfx Agszu A Rxjgsgg total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.