Used Eba 10/550 Cnc for sale (39,143)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Nwodpfx Aezfwavjbuon Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Condition: used, ROTATION DIAMETER 630 MM MAXIMUM TURNING DIAMETER 510 MM MAXIMUM TURNING LENGTH 1578 MM BENCH INCLINATION 45° MAXIMUM X AXIS TRAVEL 1590 MM MAXIMUM Z AXIS TRAVEL 290 MM RAPID 20 M/MIN SPINDLE BORE 105 MM ASA A2-8 CHUCK NOSE TAPER SPINDLE MOTOR POWER 18.5 - 22 KW SPINDLE SPEED 2500 RPM QUILL OF TAILSTOCK DIAMETER 125 MM TAILSTOCK TRAVEL 1590 MM TAPER QUILL CM 5 QUILL TRAVEL 120 MM Nsdpforzt Iqex Abuown CNC FANUC Oi-TC CHUCK DIAM. 380 MM ROTATION TURRET WITH 12 PLACES CHIP CONVEYOR YOM 2008 WEIGHT 8500 KG

Condition: used, Herkules WS1100 x 7000 CNC roll grinder (re-manufactured by Metex - Year 2011) Model WS1100 x 7000 18 ton capacity Nwjdpfjy U Hc Iox Abuon 1100mm swing 7000mm between centres Single saddle 700mm chuck Lismar roll inspection Waste conveyor Siemens Sinumerik 840 DSL controls Safety fence

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). Nedpfxozv U Tbj Abuewn • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Nwodpfjznuxbsx Abuon Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Nsdpfoz Ha Hlex Abuown Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Njdsy Edqqspfx Abuswn Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, Year of construction: 1997, Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Nedpfx Aozy E Svobuewn Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Automatic chip conveyor Additional equipment: vertical vise Machine weight: 2200 kg Nwjdpfxeyyuxno Abuon The machine is in excellent condition and will be fully inspected and serviced.

Year of construction: 1991, condition: used, Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible. Nwjdpjzz Irbofx Abusn

Condition: new, Year of construction: 2026, CNC Heidenahin or Sinumerik Travel distance X-axis: up to 1,800mm Travel distance Y axis: up to 1,600mm Travel distance Z-axis: up to 1,250mm Table load: up to 5,000kg Spindle diameter: 105mm Spindle speed (max.): 3,300 rpm Table length: 1,400mm Table width: 1,600mm Travel distance W-axis: 630mm Optional: Automatic Tool Changer.....40 pos Coolant through spindle.....20 bar Nwedpjr Hdqxsfx Abujn Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Very compact punching and nibbling machine Suitable even for limited space Boschert EL500CNC Z TRUMPF rapid tool change system Punching force: 280 kN (28 tons) Travel distances x- 1000 mm (repositioning up to 9999 mm) y- 580 mm Punching arm overhang: 730 mm Trumpf Gr1-3 (105mm) tool system Labod 32040 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, continuously programmable upwards and downwards. Punching slug extraction Table width left + right: 1100 mm each Table depth: 810 mm Table height: 900 mm Overall width: 2582 mm Overall depth: 2800 mm Overall height: 2080 mm Drive power: 20 kVA Machine weight: 8,300 kg Hydraulic oil capacity: 80 l Color: Reseda green RAL6011/Light gray RAL7035 Machine year of manufacture: 2003 Very well-maintained condition Nsdpfx Abohr A Nvsuown with a lot of accessories Tool cabinet

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Nwodpfx Abjzukurjujn Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Nwjdeyl Uh Sopfx Abuen Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: used, Year of construction: 1986, spindle diameter 1 mm Njdpfx Abjylzv Aeuswn x-travel 1 mm y-travel 1 mm total power requirement 1 kW

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells Nedpfx Abjz N Sgweuown laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Description Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 180 mm Control: Fanuc 180-T Grinding wheel width: 80 (100) mm Grinding wheel diameter: 450 mm Grinding wheel motor power: 7.5 kW Table speed: continuous 10 m/min Swiveling grinding wheel head: ° Speed range (workpiece spindle): 10 - 800 rpm Swiveling workpiece head: 0 - 15° Maximum workpiece weight: 120 kg Tailstock mounting taper: MK 4 Tailstock quill travel: 35 mm Operating voltage: 400 V Nwjdpfxezmmths Abusn Total power consumption: 18 kW Machine weight (approx.): 6.5 t Dimensions (approx.): 3.75 x 2.25 x 1.80 m - Factory number: 6769 - Universal external grinding machine with attachment for internal grinding - B-axis controlled for automatic swiveling of the grinding wheel head

Condition: used, Year of construction: 2000, No. of axis 10 Njdpfxszvcdue Abuown No. of spindles 2 Max. spindle bore 10 mm Spindle speeds 100-16000 rpm Control: Fanuc Equipped with: Magazine barfeeder FMB Minimag Chip conveyor

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Power on spindle:16kW Spindle speeds: 3150Rpm Njdpfxjzvfiae Abuewn Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 4700mm Width: 2300mm Height: 2300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-69T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-69T control - More efficient bending thanks to automatic control of 8 axes - Can store up to 500 programs, each consisting of 25 steps and 99 repetitions. - Can save up to 30 upper and lower dies. - 2D and 3D programming capability - 17-inch color TFT screen of high resolution - Windows-based software with PC programming capability - Crowning control managed by the controller - A well-integrated structure, designed by Delem to meet the highest standards. - USB port with device connectivity - Mounting port for a bending sensor - The control system and sensors prevent collisions between individual axes. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Within the service, our technicians may - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty Nedjvwmgtepfx Abuewn - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Nwjdez Icz Ijpfx Abujn Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: new, Year of construction: 2020, pressure: 135bending length: 3050column width: 2550daylight: 380stroke lenght (max.): 180column throat depth: 250messurements (LxWxH): 3760 x 2150 x 2450weight approx.: 6500motor power: 11          Standard equipment: KK-Industries GmbHhas the general agency of the KK Kletzer group of companies. We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by KK Kletzer bursa Turkey Model KK Kletzer Europa Compact The strong press brake KK Kletzer Europa Compact  is characterized by its high precision, accuracy and versatile application. KK Kletzer Europa Compact   press brake distinguishes itself by its high precision, accuracy and versatility. We focus on quality, which is also reflected in the control system. As standard control we have the high-quality controls from Italy 10 2 D with simplest programming Nwedefnlqdepfx Abusn Furthermore, the press brake KK Kletzer Europa Compact  is equipped with Y1, Y2, X CNC axes via the control. Even with the top tool and the die we make no compromises and equip the CNC press brake KK Kletzer Europa Compact   with quality tools from EUROSTAMP Italy. or Rolleri Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. CNC axes Y1, Y2, X Control 2 D 10 Backgauge with double linear guidance and ball screw centrally adjustable crowning device 2 pcs Aulfagearme front heavy version Height adjustment on linear guide Laser protection device on the upper beam CE protection options: CNC R-axis     EURO 4.500,- CNC crowning EURO 3.000,- Distributed by: KK-Industries GmbH Tel: 0043 (0)664 380 7776 There's something for everyone!

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Nwodpfx Abeuu Ntgsuen Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement Location - Poland

Condition: good (used), Year of construction: 1996, incl. Chip conveyor incl. Chip crusher Under power incl. spare rollers Power on hours  23.000 H Working hours ca 8.000 H Rail track gauge: 1435mm Max. wheel tread Ø: 1400mm Min. wheel tread Ø: 520mm Max. axle length wheel set:2450mm Min. axle length wheel set:1620mm Speeds / ranges: 154Rpm Number of slides: 2 Power: 44kW Length: 6000mm Width: 2200mm Nodpfjw Rc Drox Abuswn Height: 2600mm Weight: 33000kg

Year of construction: 2006, condition: ready for operation (used), overall weight: 17,000 kg, total width: 2,450 mm, total height: 3,300 mm, pressing force: 306 t, product length (max.): 4,550 mm, number of axes: 3, Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details. • Control system: Cybelec CNC • Drive system: Hydraulic Nsdpfx Abszcbypsuown • Main motor power: 22 kW • Working speed: approx. 80–100 mm/s • Rapid approach speed: approx. 100 mm/s • Key features: • Heavy-duty industrial CNC press brake • High-precision Cybelec CNC control system • Robust and rigid steel frame construction • Suitable for large and thick sheet metal bending • Ideal for industrial production and heavy steel fabrication Technical Specification Bending Length 3100 mm