Used Enerpac Hydraulic Pulling Cylinder 50 T for sale (93,831)

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Psdeu D Tz Uopfx Almspt Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Ppodpfx Alsdzp Trjmjt Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm Ppjdpfxod Erv No Almet -Piston rod: Ø 36 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 415/120/H110 mm -Weight: 14 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Podpfoy T Iwqox Almjpt 3D measuring probe, Simulation graphics, Pocket with islands, Synchronous tapping drill, Helix, 3D option, NC / Dialog mix, Surface selection, Tool change optimization, Tool + material database, X-axis bearing likely defective.

Condition: excellent (used), I am offering professional HURST hydraulic spreaders – Jaws of Life – used in technical rescue operations (fire departments, emergency services). Pjdpfxjyxta Ie Almept Equipment from the renowned brand HURST Rescue Systems (USA) – a market leader in hydraulic rescue tools. Condition: - Fully operational and tested equipment. - Completely functional – ready for immediate use. - Displays normal signs of use (scuffs, marks – visible in the photos), which do not affect performance. Details: Manufacturer: HURST Rescue Systems Type: Hydraulic spreaders Application: Technical rescue, fire brigade Hydraulic quick couplings included Set includes: 2x HURST hydraulic spreaders Hydraulic hoses as shown in photos Applications: - Fire brigade (volunteer/professional) - Road rescue operations - Hydraulic power systems - Workshop and service operations. PRICE LISTED IS FOR 1 PIECE.

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: hydraulics, low noise, TEC-POINT Hydraulic Breaker KT53S in soundproofed design is the powerful solution for professional demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, as well as municipal and inner-city construction sites. Thanks to the fully enclosed, soundproofed housing, the breaker operates with reduced noise levels while also protecting the internal components from external influences on the job site. This makes the KT53S particularly suitable for use in residential areas, noise-sensitive environments, and anywhere robust performance is required with reduced noise emissions. The interchangeable upper swivel head ensures flexible applications, while the large overall length offers extensive reach and efficient energy transfer when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 2.0 to 4.5 tons 📍 Immediately available from stock in Rheda-Wiedenbrück 🚚 Pick-up on site or shipping by freight carrier Europe-wide possible 💶 Price: €1,799 net plus VAT – negotiable 🧾 Invoice with indicated VAT will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT53S Silenced Type 🔹 Version: soundproofed model 🔹 Suitable excavator weight: 2.0 to 4.5 tons 🔹 Weight: 165 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 25–55 l/min 🔹 Impact frequency: 600–1250 blows per minute Ppedpfey N Sfdex Almot 🔩 Mounting Dimensions / Compatibility 🔹 Mount width: 110 mm 🔹 Pin center distance: 120 mm 🔹 Pin / bore diameter: Ø 35 mm 🔹 Chisel diameter: 53 mm We are happy to check the suitable attachment dimensions for your excavator model and coordinate them upon request. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and assist you in selecting the right hydraulic breaker for your carrier machine. You are warmly invited to visit our warehouse in Rheda-Wiedenbrück. On site, you can inspect, compare, and, by arrangement, test our machines and attachments. We look forward to your inquiry!

Condition: new, functionality: fully functional, color: orange, overall weight: 72 kg, Year of construction: 2026, Equipment: hydraulics, The TEC-POINT Hydraulic Breaker KT40 in Top Type-S configuration is the professional solution for demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, and compact job site applications with mini and compact excavators. Thanks to its robust construction, compact size, and reliable impact performance, the KT40 is ideally suited for daily use on construction sites. The top-mounted design ensures efficient power transmission and excellent operating reach when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 0.8 to 2.5 tons 📍 Available immediately from stock in Rheda-Wiedenbrück 🚚 Local pickup or Europe-wide shipping via freight forwarding available 💶 Price: €1,200 net plus statutory VAT – negotiable 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT40 Top Mount S 🔹 Configuration: Top Type-S / straight design 🔹 Suitable for carrier weight: 0.8 to 2.5 tons 🔹 Weight: 72 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 15–30 l/min 🔹 Impact frequency: 800–1400 blows per minute 🔩 Mounting dimensions / Compatibility 🔹 Mounting width: 92 mm 🔹 Pin center distance: 90 mm 🔹 Pins/Bore: Ø 25 mm 🔹 Chisel diameter: 40 mm We would be pleased to check the appropriate mounting for your excavator model and coordinate it individually upon request. Pedjy N R Azjpfx Almspt 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and help you choose the suitable hydraulic breaker for your carrier unit. We warmly invite you to visit our warehouse in Rheda-Wiedenbrück. On site, you may view, compare, and, by arrangement, test our machines and attachments. We look forward to your inquiry!

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Ppodpfoy E T A Aox Almjt Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: like new (used), type: HZO 50/30/600/D/GL Ppsdpfjyxnwujx Almjt piston diameter: 50mm piston rod diameter: 30mm stroke: 600mm perm. pressure: 103 bar

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU perm. pressure: 250 bar piston diameter: 100mm piston rod diameter: 60mm stroke: 1200mm Pedpfx Aloyxqmlsmjpt

Condition: like new (used), functionality: fully functional, type: HZOS 160/100/1200/D piston diameter: 160mm piston rod diameter: 100mm stroke: 1200mm perm. Pressure: 250 bar Psdpfxoyxqrbs Almspt

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm Pjdpsb A Rr Rsfx Almspt -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available Ppsdpfx Alob A Rcujmjt -Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Condition: like new (used), 15 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Negotiable price: € 1.150,-- net ex stock Ppedpfxskkch Eo Almjt Offer consists of: + 4 pcs. frames pre-assembled, depth 50 cm, height 3 m + 18 pcs. beams, length 3,7 m, 1000 kg load/slot + 36 pcs. suspension locks + 16 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Ppjdpfjuhl E Rox Almjt Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Table size: 1050x800mm Stroke length: 400mm

Condition: used, functionality: fully functional, machine/vehicle number: 2482458, Year of construction: 2020, load capacity: 5,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 55.4 kW (75.32 HP), fork carriage width: 1,250 mm, fork length: 1,220 mm, fork width: 150 mm, fork thickness: 55 mm, turning radius (inner): 130 mm, turning radius (outer): 2,920 mm, front tire size: 300-15 19PR, rear tire size: 7.00-12 12PR, overall weight: 6,930 kg, total height: 2,390 mm, total length: 4,470 mm, total width: 1,490 mm, color: red, Equipment: cabin, pallet forks, Technical Specifications Year of manufacture: 2020 Engine: Diesel 55.4 kW Transmission type: W Max. load capacity: 5,000 kg Load center: 500 mm Ppsdpfx Aljyqziasmjt Tyres: 300-15 18PR / 7.00-12 12PR Fork dimensions (L x W): 1.22 m x 0.15 m x 0.055 m Overall dimensions (L x W x H): 4.47 m x 1.94 m x 2.39 m Weight: 6,930 kg Lift height: 4.70 m Displacement: 2.92 l Lifting speed with/without load: 0.43 m/s / 0.46 m/s Max. gradeability: 20% Turning radius: 2.92 m Speed at max. torque: 2,200 rpm Number of cylinders: 4 Travel speed with/without load: 13 km/h / 23 km/h Fully functional, general signs of use, UVV

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Ppodeyzl T Eepfx Almet Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, D-T50 – CNC Turret Punch Press | Heavy Duty CNC Turret Punch Press – D-T50 | 500 kN | Sheet size 2500×1250 mm Heavy-duty CNC turret punching machine engineered for high-volume sheet metal fabrication. With a punching force of 500 kN and a stroke rate of 160 hits per minute, the D-T50 guarantees excellent productivity and precision. Key Specifications: • Capacity: 500 kN • Hit Rate: 160 strokes/min • Sheet Size: 2500 × 1250 mm • Max. Sheet Size (with single reposition): 5000 × 1250 mm • Max. Sheet Thickness: ≤ 6.35 mm • Accuracy: ± 0.1 mm • Feeding Speed: 80 m/min • Turret Stations: 16 / 24 / 32 • Air Pressure: 0.65 MPa • Machine Dimensions: 5000 × 5200 × 2300 mm Pjdpfxoy Swn Ne Almept ✅ High hit rate – ideal for mass production ✅ Extended sheet capacity with repositioning up to 5000 mm ✅ CE certified | Warranty included | Spare parts & service available D-Y80 – CNC Turret Punch Press | Heavy Duty | Thick Plate CNC Turret Punch Press – D-Y80 | 800 kN | Thick Plate up to 15 mm Heavy-duty CNC turret punching machine designed for processing thick sheet metal. The D-Y80 accommodates material up to 15 mm thick, delivering 800 kN punching force — perfect for structural and heavy-gauge tasks. Key Specifications: • Capacity: 800 kN • Hit Rate: 100 strokes/min • Sheet Size: 2000 × 800 mm • Max. Sheet Thickness: 6–15 mm • Accuracy: ± 0.15 mm • Feeding Speed: 60 m/min • Turret Stations: 6–12 • Air Pressure: 0.65 MPa • Machine Dimensions: 4100 × 4000 × 2400 mm ✅ Exceptional punching force – specialist for heavy-gauge sheet metal ✅ Robust design for demanding industrial applications ✅ CE certified | Warranty included | Spare parts & service available

Year of construction: 1998, condition: used, machine/vehicle number: 23 800 029, table mounting size: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm Ppsdpfx As Ici Ujlmjt spindle taper: SK 50 spindle turning speed range: 56 - 2800 rpm carriages longitudinal and cross: ca. 10 - 1800 mm/min carriages vertical: 2,5 - 450 mm/min electrical connection: 400 V, 16 kVA kW space needed: 2000 x 2250 x 2150 mm weight: 4500 kg

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 500 mm, table length: 700 mm, rotational speed (max.): 9,000 rpm, rotational speed (min.): 20 rpm, table load: 200 kg, overall weight: 3,500 kg, workpiece weight (max.): 6 kg, space requirement width: 2,300 mm, space requirement length: 2,300 mm, space requirement height: 2,000 mm, For sale: Deckel MAHO DMU 50 T. Year of manufacture: 2001. The machine is equipped with the popular and powerful Heidenhain MillPlus / 3D path control, workshop-serviced and immediately ready for operation. Podpfxjy Raf Uj Almspt 3-axis base machine with manual swivel rotary table [3+2 axes]. Available from calendar week 21. Can be inspected under power at the location near Salzburg, Austria, immediately. Condition: Very good (low operating hours for its age) Incl. accessories. Machine weight: 3,500 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, pressing force: 150 t, overall weight: 1,400 kg, Equipment: CE marking, We are offering this quality Sahinler 1020-150 workshop press, hydraulic press, 150 tons, year of manufacture 2012. - Adjustment of closing stroke with fine tuning - Table height adjustable - Automatic pressure cut-off at set pressure - Separate 2-hand control panel - Table plate with T-slots for T-nuts - Ram plate with slots - 2 machine guide columns for the upper ram plate Fully functional Ppodpoyzl Amefx Almot The machine can be demonstrated on site Hardly used, only for prototype production Single owner Dimensions as per data sheet Loading on site possible. Weight approx. 1.4 t Original price approx. €21,000 net No warranty or guarantee If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, machine/vehicle number: BSD, Year of construction: 2023, operating hours: 595 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: diesel, mast type: triplex, construction height: 2,730 mm, power: 55 kW (74.78 HP), fork length: 1,400 mm, empty load weight: 9,400 kg, total length: 4,500 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Chassis number: BSD Ppsdpsyw Aynjfx Almot Load centre: 700 Fork width: 180 mm Fork thickness: 50 mm Mast type: Triplex Transmission: hydrostatic Condition: new machine Technical condition: very good Front tyre type: pneumatic Front tyre size: 27x10-12 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Rear tyre size: 27x10-12 Rear tyre condition: 80 - 100% Hydraulic fork height adjustment – rear, adjustment range: +/- 100 mm, 2x additional work lights, seat – Grammer Maximo L – air-suspended, platform height 850 mm

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 250 mm -Piston rod: Ø 25 mm -Hole: Ø 25/19 mm Ppsdpfxeyma Srs Almst -Pitch spacing: retracted 465 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 530/60/H73 mm -Weight: 5.9 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm Pjdpfx Aofrzrpslmjpt -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430 MHaidenhain TNC 430 M, spindle speed (max.): 8,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information. Ppedpfjydk Npjx Almjt • Rapid traverse (X/Y/Z) 12 m/min • Machining capability: 5-axis machining via manual swivel/rotary table axes • Cooling system: External coolant supply; capacity 80 liters; coolant used Alusol SL 51 XBB • Tool system: Tool magazine with 16 tool positions Technical Specification Taper Size SK 40