Used Galen Construction Machine for sale (77,761)

Condition: new, machine/vehicle number: Elek Kova, Attachment suited for: Construction machines Selling price: € 24.500, US$ 25.960 With proper blade choice and spacing it easily grinds • Grass lumps • Roots • Wood sticks • Glass • Tiles • Asphalt (with certain limitations) *The screener crusher is not suitable for crushing concrete or hard stones. Advantages: - Clog free structure that ensures good capacity, even with wet materials - Top screen combs carry most the material weight, this way the drums and bearings have less impact and load - Changeable wearing parts (screening blades and top screen combs) lower the operating costs - Simple structure (easy maintenance) - The top screen structure works smoothly, even with wet materials. Screening buckets produced by Galen are therefore an excellent choice for screening topsoil, compost and peat and the perfect tool for landscaping. 1.Innovative frame design • Straight outer sides • Low fastering points for wheel loaders 2. Long lifetime of blades and blade holders • New design ensures low wear factor • Spring pin fixing allows easy change of blades • Design of the blade protects the blade holder 3. Modular counter blade construction • Same counter blade elements used on all models • Counter blade also below the lower drum 4. Centralized lubrication points of the bearings • Easy access points in the frame make the greasing easy. • Speeds up with the daily service and maintenance. 5. No need for drain oil line • Lower installation costs • Easy to use on different base machines Nedpsph Rm Sjfx Abuewn For 8 - 40 tons EXCAVATORS For 5 - 26 tons WHEEL LOADERS Prices are representative. Please contact us. For detailed information please visit screenbucket.net

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) Nedpfxoya H Nkj Abuewn 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Westtech Woodcracker G1650 Root Rake - New machine, in stock - Working width: 1650 mm - Own weight: approx. 1610 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle weight: approx. 20-25 t - 2x hydraulic gripping arms - Optional: fine rake attachment Numerous adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telescopic handler sales and service partner, JCB construction equipment dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental possible = Further information = New: Yes Contact Tobias Ebert for further information. Nwjdpfx Aboyfrgleuon

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL Nwedszb Ipzjpfx Abuon 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, Nwsdpfx Ajzqr Hnsbujn coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: used, Westtech Woodcracker CS750 Smart Available immediately Features: - Endless rotating tiltator - Cutting diameter: 750 mm - Gripper opening width: 1,280 mm - Own weight (basic/fully equipped): 820/980 kg Nedpfx Abeyfqz Usuown - Recommended hydraulic flow rate: 65–110 l/min - Recommended operating pressure: 230–280 bar - Carrier vehicle operating weight: 15–30 t - Saw box: actively suspended - Saw chain lubrication: grease - Optional: Power tiltator, endlessly rotatable Multiple units in stock / fits perfectly on Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be supplied in combination with a Magni machine. Also compatible with Merlo. We are official Westtech Woodcracker sales and service partners, Magni telehandler sales and service partners, JCB construction equipment sales and service partners, Mercedes-Benz service partners, Iveco service partners, and with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Year of construction: 2006, operating hours: 704 h, condition: used, Rental possible = Further information = Nwedoyxkm Eopfx Abujn Contact Tobias Ebert for more information.

Condition: used, Year of construction: 2004, machine/vehicle number: 90380, Edgebanding machine, year of manufacture 2004 Nsdpjxxzk Sjfx Abujwn

Condition: new, functionality: fully functional, Year of construction: 2026, Item number #31172 NEW!!! GMT-TTC package Quick-change JIB extension arm GMT035 transport box Leasing or financing options available upon request!! Nedpoz Rw Sujfx Abuown

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm Nodpfx Abox D Df Njuswn MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Kinshofer Pallet Clamp / Block Stacking Clamp / KM 332 V – 1100 / NEW Price: €8,790.00 net / €10,460.10 gross Insertion depth (mm): 1,100 – 1,650 Load capacity at min./max. insertion depth (kg): 1,900 / 1,350 Opening width A min./max. (mm): 400 – 1,400 Height (without motor) (mm): 1,315 – 1,865 Weight (without clamping rails) (kg): 340 Operating pressure at flow rate: 20 – 26 MPa (200 – 260 bar) at max. 75 l/min and 20 – 37 MPa (200 – 370 bar) at max. 40 l/min The technically advanced KM 332 block stacking clamp offers versatile usage for both palletized and non-palletized building materials. - Fixed or adjustable insertion depth with hydraulically operated parallel opening and closing grab arms. - Versatile application thanks to opening widths from 400 mm to 1,400 mm, ideal for loading single concrete elements such as kerbstones as well as complete brick packs. - Adjustable insertion depths – perfect for loads with varying heights. - Synchronisation of the grab arms by two hydraulic cylinders, interconnected via a differential system. Nedpfxjyfm Ecs Abuown - Safety ensured by an overpressure valve in the hydraulic system to protect against overload. A check valve prevents release of the clamped package, even in the event of pressure loss in the carrier. - Durability thanks to generously sized bearings, integrated lubrication reservoir, automatic main bearing wear compensation, and spherical central cylinder mounting. We have a large selection of various attachments immediately available from stock! Mr. Herden (Tel.) will be happy to assist you. On request, we are pleased to provide you with a tailored financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Subject to prior sale and errors excepted! = Further Information = New: Yes Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Nwodpfsyzf Najx Abuon Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, functionality: fully functional, Year of construction: 2026, New work platforms for telehandlers! MADE IN AUSTRIA! All common mountings available! (Manitou, Merlo, JCB, Bobcat, JLG, Kramer, Terex, CAT, Genie, Liebherr, Volvo, Ausa, and more...) With CE certification! Also available with brackets for forklift operation! Own weight: 178 kg. Payload: 200 kg (2 persons). Dimensions L/W/H: 215 / 100 / 120 cm. Powder-coated in RAL 3000. Sale price: €1,990 net per unit! Shipping available! Nsdpfx Absywx Egsuswn

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. Nwodsx D A Rkjpfx Abuen - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Maximum flow rate: up to 550 m³/h Maximum head: up to 26 m Nwsdpfjzlz T Hsx Abusn Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Maximum immersion depth: 20 m Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Nwodpfx Abox Rvc Aousn

Condition: new, Attachment suited for: Construction machines Selling price: € 1.000, US$ 1.053 We produce grabs, attachments necessary for handling all types of materials in port enterprises, ship decks, factories and mobile cranes and related auxiliary equipment with GALEN quality and assurance. Underwater Clamshell Nwjdpfxspa Rnlo Abusn Mechanical and Hydraulic Clamshell Under Crane Products Price is representative, for detailed information please contact us We have the production capacity with very low tolerances.

Condition: like new (used), Year of construction: 2008, Tipping Device and Concrete Spreader VOLLERT WECKENMAN Nsdpfjxza Nfsx Abujwn Year 2008 Never used Lifting device capacity: 5 tons. With synchronized control Concrete spreader cover: 7.5 tons, with internal blade auger In perfect condition

Condition: new, empty load weight: 700 kg, maximum load weight: 2,800 kg, overall weight: 3,500 kg, loading space length: 3,950 mm, loading space width: 1,820 mm, loading space height: 250 mm, Car trailer for transporting construction machinery from the trailer manufacturer TEMARED model Builder3-4018/2S 3500kg. Njdpfx Abov A T Ihsuown Standard equipment of the machine trailer is a stable frame, drive-over flap, bucket rest, support wheel and a V-drawbar.

Condition: used, Year of construction: 2015, Agile 4x4 forklift, lifting capacity 2 tons. Nwodpfx Abjzmgtbjujn

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. Nedpfxoq N Ud Ie Abujwn 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Nwodpfxozav D Ds Abuon Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Njdpfsz Tf D Rex Abujwn Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Nodpfjxz Dqgox Abuown Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: used, New: Yes Colour: Silver Nwedpfx Abox D A R Deujn Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph = Additional options and accessories = - Originally painted - Tool box = Remarks = BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.