Used Hämmerle Bm 200-3100 for sale (17,864)

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Kdedpfxeirmule Acfop

Condition: ready for operation (used), SEW-Eurodrive KHF47 DT71D4/BMG/TF motor SN 01.1200190101.0003.07,used, minor signs of wear, 100% functional, scope of delivery as per photos Kdedpfeqm Sqlex Acfop

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Kdodpfewc Rk Eex Acfop Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. Kjdezlaqkjpfx Acfjdp The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: good (used), Included in the scope of delivery: Kjdoipuggspfx Acfsdp 1x bracket for push-through lock, used Material color: Sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/piece: 0.930 kg

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 04x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Kdsdpfxjhq Txhe Acfop Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new for fastening the worktop 08x locking hooks, new Material color: fully galvanized

Year of construction: 2020, condition: new, We are offering for sale a new shelf connector from the manufacturer Nedcon NS. The scope of delivery includes: 01x SET of spacers, new Length: 200 mm Material color: Sendzimir galvanized consisting of: 01x Spacer, L=200, Sendzimir galvanized 02x Hex head screw 8.8, M10x25 galvanized Kdedpfx Asf S Iq Tecfsp 02x Lock nut, 6-sided 8.8, M10, flange, galvanized 04x Hex head screws, M10, galvanized

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x Workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, foot plates The frames are pre-assembled (bolted framework) 888 mm high 700 mm deep 04x Workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized Kdedpehq Twysfx Acfsp 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x Steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x Angle set, new for mounting the worktop 08x Locking hooks, new Material color: fully galvanized

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Kdodpfehq Txwox Acfsp Frame type: TS4 including cross and diagonal braces, footplates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new for attaching the worktop 04x locking hooks, new Material color: fully galvanized

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Kedpfjthfddox Acfodp Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Overall length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm Headplate: approx. 100 x 40 x 4 mm Borehole diameter: approx. 9 mm (2 pieces per side) Weight: approx. 0.41 kg | piece Kodpjk Iuhfefx Acfodp

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; Kdjdpstk Iwajfx Acfjp - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approximately 3-4 weeks Technical specifications of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x workbench stands, new Material color: fully galvanized Stand type: TS4 including cross and diagonal braces, foot plates The stands are pre-assembled (bolted framework) 888 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Kdedpfx Aehq Tqdocfsp Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x angle set, new for fastening the worktop 04x locking hooks, new Material color: fully galvanized

Condition: good (used), The scope of delivery includes: 1x U-shaped corner guard, used Material color: orange Overall height: approx. 350 mm Overall width: approx. 200 mm Internal width: approx. 160 mm Overall depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimension: approx. 140 x 140 mm Base plate dimension: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore hole diameter: approx. 16 mm Ksdpfx Acok T Au Eefjdp Number of bore holes: 04 pcs. Weight / piece: approx. 14.850 kg General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Kdedpfx Acezkmfxsfop

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 printer with Corrugated Option Fully automated feeder and stacker Resolution: 10 pl – 1000 dpi Colors: 6C + (optional White) Very low mileage Speed: up to 2025 m²/h Fully automatic loader (feeder) Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 screens to lower the material Corrugated static bar for different material thicknesses Kdedpfxoy Amckj Acfop Corrugated software to control media and thickness - Understatic bar and automatic media stop in case of a collision - Caldera RIP software

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Versant 3100’ colour production system Items for sale: 1 x Xerox Versant 3100 with the following specifications: Includes Fiery Server Pro Includes A-CF03 paper tray Includes 2 x LCS-1 stackers Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,924,459 pages Colour: Approx. 2,647,224 pages Black: Approx. 277,235 pages Condition: Kodjzaqg Hspfx Acfsdp This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 200 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 850 mm, total width: 670 mm, pressure: 200 bar, empty load weight: 20 kg, fuel: super 95, overall weight: 80 kg, warranty duration: 12 months, power: 8.09 kW (11.00 HP), pressure (max.): 200 bar, water pressure: 200 bar, Equipment: chassis, The BMK series high-pressure cleaners are powered by a Honda gasoline engine and therefore do not require an external power connection. They offer maximum mobility and flexibility for work in areas with limited infrastructure. These devices are particularly characterized by their simple and, as a result, durable design. The machine can optionally be equipped with an electric starter (E-start). Included accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP350 Soft CL high-pressure gun with swivel joint at the inlet - CL twin nozzle with nozzle protection, including flat jet high-pressure nozzle Dimensions: 1100 x 670 x 850 mm Weight: 80 kg Available models: BMK 160-25 | 160 bar | 25 l/min BMK 200-20 | 200 bar | 20 l/min Kdedozd Uawepfx Acfsp BMK 250-15 | 250 bar | 15 l/min

Condition: excellent (used), Staircase clamp (28366) Clamping height 200 - 250 mm Kdedoln Ulaopfx Acfep T-slot width 12 mm Clamping screw M 10 4 pieces available Weight 8.5 kg

Condition: good (used), Neolt Electro Power TRIM 200 Trimmer The device is fully functional and ready to use. Description: Ideal for trimming drawings, photos, posters, etc. Rotary hardened steel blade Transparent plastic pressure plate for precise cutting Sturdy base for creating a professional workstation Kdedpezladqefx Acfop Cutting length: 200 cm

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Ksdpsh Anyfjfx Acfedp Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm Kodoy E Abnspfx Acfedp * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: used, ---- Recording: SW48 Cutting width: 2200 mm Kdodpfozkzcfjx Acfsp Knife wear: 60% Cylinder: worn Back cutting

Condition: used, Year of construction: 2011, HWACHEON HI-TECH 200B MC CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B, MC YEAR 2011 CONTROL FANUC Oi-TD SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS C AXIS MILLING CNC BARFEED RENISHAW PROBE PARTS CATCHER TAILSTOCK Kjdpfoyyy Stjx Acfjdp SWARF CONVEYOR MACHINE MANUALS

Condition: excellent (used), functionality: fully functional, POSITECTOR 200: Positector-200 Coating Thickness Gauge for Wood, Concrete, and Plastic The Positector-200 Coating Thickness Gauge for Wood, Concrete, and Plastic offers 3 measurement ranges, and all 3 versions are available in Standard or Advanced models: PT-200B: 13 - 1000 microns PT-200C: 50 - 3800 microns PT-200D: 50 - 7600 microns The PosiTector 200 non-destructively measures a wide variety of applications using ultrasonic technology. It measures coating thickness on wood, concrete, plastic, composites, and more. Advanced models measure up to 3 different layer thicknesses in a multi-layer system and feature a graphical display for detailed analysis of the coating system. Ksdpfxozif Rds Acfsdp Simple: Ready to measure - no adjustment needed for measuring most coatings Enhanced one-handed menu navigation Flashing screen - ideal in a noisy environment The RESET function instantly restores factory settings Durable: Resistant to solvents, acids, oils, water, and dust - waterproof Scratch-resistant screen suitable for harsh environments Shock-absorbing rubber protective housing with belt clip 2-year warranty on the gauge and probe Accurate: Calibration certificate (long version) showing NIST traceability included Sensitive sensors provide fast and accurate readings (up to 40 readings/minute) Proven, non-destructive ultrasonic technique complies with ASTM D6132 and ISO 2808 standards Versatile: High-contrast backlit display for dark or bright environments Interchangeable Mils/Microns units Selectable languages Reversible display for right-side viewing Uses alkaline or rechargeable batteries (integrated charger) Powerful: Statistics - continuously displayed, updated average, standard deviation, min/max thickness, and number of thickness readings USB output for simple and fast connection to a PC and continuous power supply. USB cable included. PosiSoft solutions for data visualization, analysis, and communication: PosiSoft USB drive - stored measurements and graphs can be accessed using universal PC/Mac web browsers or file explorer. No software required PosiSoft.net account - a free online application offers secure storage of thickness readings PosiSoft software - Continue to use the familiar desktop software you've used for years. Available for free download. PosiSoft Mobile -(only in Advanced models) - access updated readings, graphs, photos, and notes via WiFi-enabled devices such as tablets, smartphones, and computers Screenshot - records and saves the image in the USB flash memory for record-keeping and review Each stored measurement is marked with the date and time Software updates via the internet