Used Höcker Polytechnik Extraction System Including Briquetting Press for sale (57,268)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Hodpfxszdn H Rs Afrjfh Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, total height: 2,400 mm, total length: 2,450 mm, total width: 650 mm, Colour: Grey Empty weight: 250 kg - Documentation available: No - CE certificate present: No - Suitable for material: Wood dust Hfodpjyy R Ryofx Afrjh - Main fan [pcs]: 1 - Number of filter bags [pcs]: 3 - Filter length [mm]: 1200 - Filter diameter [mm]: 500 - Filter surface area [m²]: 7 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Options: Collection bags - └ Number of bins/bags [pcs]: 3 - Transport dimensions: 2450mm x 650mm x 2400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Dust extraction system for grinding dust from a vocational training center. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Hfedpezbir Djfx Afroh DE - 44143 Dortmund - Wambel / Germany

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table with extraction and filter The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Work area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L= 1500/2000 mm available) Compressed air connection: yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.5 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 dB(A) without cleaning / 85 dB(A) without cleaning Pipe connection: D=250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning via front button - Differential pressure manometer for easy monitoring of cleaning requirements - Integrated energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward curved, self-cleaning blades; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls and ceiling ensure effective extraction and comprehensive air guidance - Height-adjustable work table - Large range of mounting and connection accessories - Quality Made in Europe Hsdpfjzdty Nex Afrefh For safe and effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may include accessories.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 2000E – 2880 m³/h – 230 V Extraction table, welding and grinding table with electric height adjustment The ISI Flow Desk 2000 E extraction table is a height-adjustable workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 2880 m³/h Work surface W/D in mm: W 1990 / D 824 Work height in mm: H 638-938 mm Table load: 200 kg/m (wood, with evenly distributed load) Work surface: Wood slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 2000 / D 1100 / H 938 (optional L = 1000/1500 mm available) Fan power: without fan Operating voltage: 1 x 230 V, 50 Hz Pipe connection: D = 251 mm Color: RAL 7042 / RAL 7011 Weight: 191 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. The table is designed for both standing and seated work with full knee clearance, focusing on ergonomics. For even more efficient work, the extraction table offers a wide range of optional accessories: - Back wall, side walls, and ceiling – optionally with soundproofing and lighting - Slats made of wood, steel, stainless steel, or plastic - Perforated steel plate on top of wood slats - Vise holder - Holder for pipe welding Hedpszdtwzsfx Afrofh - Spot extraction arm Your advantages of the ISI-Flow Desk series: - 12 device variants available - Piping can be connected on the right, left side, or on both sides - Electric height adjustment at the push of a button - Wide range of mounting and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: new, functionality: fully functional, volume flow: 134 m³/h, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Hedpfozdtqusx Afrofh Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: new, Year of construction: 2024, new dust extractor Year of manufacture: 2024 For wood dust and chips, designed for commercial use Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Hsdpfx Afjyq T Hkjrsfh Maximum performance in this class Very quiet All models equipped with collision guard Dimensions (LxWxH): 1755 x 830 x 1800 mm Chip collection volume: 2 x 165 l Extraction inlet diameter: 200 mm Weight: approx. 259 kg Filter area: 22 m² Manual filter cleaning Sound pressure level: 72 dB(A) Nominal air volume: 2262 m³/h Maximum air volume: 3700 m³/h Motor: 400 V, 3 kW Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Location: From stock Bitburg Hfjdscdy Ndopfx Afreh

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg Hfsdpfodqzhhsx Afrjh

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Hfsdpjcdy I Tjfx Afroh Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Chip extractor ASA 2803 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Hfodohk S Sdepfx Afreh Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 120 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Idle speed 2950 min¯¹ Input power 2,2 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1,92 m² Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal volume flow 2800 m³/h Negative pressure max. 1900 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 1903 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 110 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Idle speed 2950 min¯¹ Input power 1,5 kW Supply voltage 400 V Mains frequency 50 Hz Hfodpfehk S Shox Afroh Filter Filter area 1,92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Negative pressure max. 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel Hfedpfx Afjhk S Sljroh High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Hfsdpfjhk S Szsx Afreh Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2026, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this Hsdpfx Afslht H Esrefh machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Hsdpoy Dc R Tofx Afrofh Subject to prior sale Sold as seen, without warranty without guarantee

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Hodpfxetnz Tto Afrjfh Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) Hodpshkzt Nofx Afrjfh - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Hfsdpfx Ashk S S Eefreh Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice - Hjdpfx Aehk S Stefrofh

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Hedpfxjhk S Sws Afrsfh Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Hodpfeil Hggex Afrofh Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Hjdpjhkzttofx Afrofh Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Hfjdpfx Ajtnz Hbefrsh Location: 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm Hfedpfxecdr E Ao Afroh nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale