Used Haas Haas St-20 for sale (40,596)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Gkjdjzrwzaspfx Al Sjc Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli Gkjdpfxjz Nfirj Al Sec - Coolant tank - Original documentation.

Year of construction: 1996, condition: used, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Godpfx Ajd Dzlijl Sokc Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm Gkjdozqt Umepfx Al Ssc B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm control FANUC 18 i-TB bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm Gkedpfx Aez Ezrmjl Soc travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW voltage 400 V toolpiece magazine: chain magazine 40 Pos. tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Gkedoz Adb Ujpfx Al Sec

Condition: good (used), Year of construction: 2013, VIKING MASEK ST 200 Stickpacker This 2-lane machine has a maximum output of 65 sticks/min and is designed for forming, filling, and sealing stick packs with powder. Gjdpfsxvzanex Al Sjkc Bag width: 17 - 40 mm Bag length: 50 - 200 mm Fill volume: 0.2 - 100 ml Max. film roll diameter: 400 mm Max. film width: 400 mm Manufacturer: Viking Masek Year of manufacture: 2013 Space requirement: 120 x 250 x 260 cm

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 033001, Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side - compatible with: Horizon MC-80a Horizon VAC-100a Gjdpfx Alsiq Nfpj Sekc Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

Condition: used, HORIZON Stacking Receiving Tray, ST-20, used The Horizon ST-20 is a smart and efficient tool for print shops. It helps organize and stack printed materials neatly, making work easier and faster. It takes printed sheets and stacks them in an organized way. It can stack sheets flat or slightly offset to the side, which helps manage different types of print jobs. Key Features - Works well with others: The ST-20 can be used with many Horizon machines, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600 - Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs - Holds a lot: It can stack papers up to 320 mm high, which means fewer stops to empty it - Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order Technical Details - Biggest sheet size: 450 x 310 mm - Smallest sheet size: 185 x 128 mm - Stack height: Up to 320 mm - Dimensions: 652 x 550 mm - Weight: 62 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Gjdpfx Aljy U E Ips Sskc Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. - Coolant tank. - Original documentation. Godjz Nhphspfx Al Sskc

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, AGIE FUTURA V 1PM MONDO 20 STAR Gkjdpfx Alsymnrmo Soc Year: 2000 Operating hours: approx. 10,000 h Documentation: Complete

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Godpfx Aox Eg T Ejl Sjkc

Year of construction: 2002, condition: good (used), machine/vehicle number: 3298, Offer 26206 Twin-chamber blasting cabinet with material recovery and dust extraction Technical data: - 2 blasting chambers - Blasting chamber width / blasting chamber depth: 600 / 940 mm each - Workpiece access via side doors Gksdjz Dt I Djpfx Al Sec - 2 hinged viewing windows: 400 x 250 mm - 2 blasting guns - 2 electric foot switches - Material recovery system - Dust extraction system with cartridge filter - Power supply: 400 V / 3 kW - Pneumatic connection: 6 bar - Space requirement: approx. W 1500 x H 2200 x D 1600 mm - Weight: approx. 350 kg

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: 20 mA PT 100 sensor Flow measurement Alarm Gksdpfx Ajzbx Rpel Sec

Condition: good (used), Haas-Laser HL 1203D Optical system: 22-31-21-BX Laser class 4 1500 W 1064 nm You can find more new and used items in our shop! Gsdsxam Ryopfx Al Sskc International shipping costs available upon request!

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Gkedpfx Alox Ek Rdj Ssc Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Gksdsz Ar R Depfx Al Soc Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Gkjdpfoziphajx Al Sjc

Condition: used, functionality: fully functional, machine/vehicle number: 512044006074, Year of construction: 2004, operating hours: 9,813 h, load capacity: 2,000 kg, lifting height: 4,335 mm, free lift: 1,515 mm, fuel type: electric, mast type: triplex, construction height: 2,000 mm, empty load weight: 3,711 kg, total length: 2,120 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Chassis number: 512044006074 Load center: 500 Mast type: Triplex Gksdozwyfrepfx Al Sjc Condition: Ready for use and fully functional Technical condition: good Description: German: Still R20-20 No.: R0817 Year of manufacture: 2004 Operating hours: not specified Lifting capacity: 2,000 kg Lifting height: 4,335 mm Overall height: 2,000 mm Free lift: 1,515 mm Mast: Triplex Battery: 48 V Battery: A refurbished battery with at least 80% remaining capacity will be installed upon purchase. As the battery will only be installed at the time of sale, no photo of the battery that will ultimately be supplied is currently available. Equipment: Side shift, fork positioner, 3rd and 4th valve, StVZO road equipment, front and rear work lights, rotating beacon and rear-view mirror. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Still R20-20 No.: R0817 Year of manufacture: 2004 Operating hours: not specified Lifting capacity: 2,000 kg Lifting height: 4,335 mm Overall height: 2,000 mm Free lift: 1,515 mm Mast: Triplex Battery: 48 V Battery: A refurbished battery with at least 80% remaining capacity will be installed upon purchase. As the battery will only be installed at the time of sale, no photo of the battery that will ultimately be supplied is currently available. Equipment: Side shift, fork positioner, third and fourth hydraulic valve, StVZO road equipment, front and rear work lights, rotating beacon and rear-view mirror. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, StVZO, interior mirror, rotating beacon, 3-wheel.

Condition: used, HORIZON Stacking Receiving Tray, ST-20 The Horizon ST-20 is a smart and efficient tool for print shops. It helps organize and stack printed materials neatly, making work easier and faster. It takes printed sheets and stacks them in an organized way. It can stack sheets flat or slightly offset to the side, which helps manage different types of print jobs. Key Features - Works well with others: The ST-20 can be used with many Horizon machines, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600. - Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs. - Holds a lot: It can stack papers up to 320 mm high, which means fewer stops to empty it. - Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order. Gkodsw Eva Djpfx Al Soc Technical Details - Biggest sheet size: 450 x 310 mm - Smallest sheet size: 185 x 128 mm - Stack height: Up to 320 mm - Dimensions: 652 x 550 mm - Weight: 62 kg 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of various materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width available). Easy operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W • 1064nm, 20-400 kHz (for perfect annealing engravings) • "New Generation ECO" scanner unit • 19" PC control, no external card required! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "Weightless" lifting door for safe marking. EZCAD III Software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP IP connectivity for external components • Industry 4.0: The system status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Performance increase of up to 50% thanks to 64-bit architecture • Improved stability through integrated control card • Optional up to 4 axis control (integrated) • Optional DEEP engraving with Z-axis • More efficient algorithms for fast hatching • Completely newly designed galvo generation • 2x laser pointer for checking the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating manual and operating software in German • Protective enclosure according to laser class 1 • Incl. 4 hours of training in our training center (max. 2 people) Do you need customization? We're happy to help. Choose from our numerous accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for loading =ᐳ Conveyor belts for infeed and output =ᐳ 3D marking and engraving function =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized slide =ᐳ Interlock system for marking WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers naturally allow for individual design and size requirements! =ᐳ Made in Schweinfurt! Gkodpjd Athmofx Al Sec Images may include options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser marking machine, laser engraving machine, laser marking system, laser marking system, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser marking machine, laser engraving machine, laser marking system, laser marking system, marking laser, marking laser, Markierheld

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Gkodpfx Aotq T Tkol Sjc Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Air suction collator BST-20d with Bourg BDF booklet maker and CC Jogger, paper collators working in two directions, fully automatic adjustable booklet maker BDF on the left, criss cross jogger on the right exit two Hohner 48/5S BDH stitching heads, max paper format 520 x 350mm, min. paper format 203 x 120mm, speed up to 4.200 brochures per hour. machine is checked and in perfect working condition, Gedpfepdnmfsx Al Sjkc all worn parts and belts have been replaced.

Condition: used, maximum load weight: 25,400 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 07/2003, next inspection (TÜV): 12/2026, total length: 14,000 mm, total width: 2,600 mm, total height: 3,890 mm, Year of construction: 2003, Stated prices exclude BPM and apply only to export. Gkedjz N N S Repfx Al Sjc

Condition: used, Year of construction: 2015, operating hours: 16,432 h, functionality: fully functional, 𝗦𝘁𝗮𝗿 𝗦𝗥20 𝗝 𝘁𝘆𝗽𝗲 𝗖 Year 2015 Production hours : 16432 h Oil tank Gedpfx Aszmw Dkel Sskc Iemca bar loader Fanuc command 31i Model B Parts belt conveyor Fanuc command 31i Model B