Used Hanel Rotomat 956 for sale (87)

Condition: used, Antike Schneidmaschine - Antique Guillotine Krause 195667Serial-No. 195667 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Cedoh Ax Syjpfx Aphsrd Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), functionality: fully functional, Power: 6370 watts Maximum operating temperature: 95°C Crjdev R Edwopfx Aphsd Medium: water Two units available! Price per piece! Price for two temperature control units: 900 EUR!!!

Condition: used, functionality: fully functional, Agilent G1956A LC/MSD VL + PC & software mass spectrometer. The Agilent G1956 LC/MSD Mass Spectroscopy Instrument is a highly reliable, laboratory-grade mass selective detector. Cedpfx Apjt Uk I Ejhsrd The Agilent 1100 Series includes variable,multiwavelength, diode-array and mass selective detectors in addition refractive index and fluorescence detectors. The fluorescence detector, which has an innovative optical design, provides: • Simultaneous quantitative and qualitative information from up to four signals in a single run, saving time • Real-time spectra (similar to diodearray detection) for fast method optimization and peak identification. The mass selective detectors offer: • complete mass spectral information from the single-quadrupole LC/MSD and complete MS/MS data from the ion trap LC/MSD Trap • excellent sensitivity, reproducibility and ruggedness thanks to a patented orthogonal-spray ion source and highcapacity drying gas system. Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Codpfx Ajwvf E Djphjrd

Year of construction: 1956, condition: used, Format 540×720 mm (21×28″) Punching cylinder Cjdpfx Ajyr H Htephord Available at short notice

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-200 12 Chanel Pipetter (Button Colour-code Green) The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Credpfx Aexv Dilsphed Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–200 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-1200 8 Chanel Pipetter (Button Colour-code Blue 100-122 LTS The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Csdpsxv Duhsfx Aphjrd Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts Credpfjzizu Ejx Aphod The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Crsdpfewxyn Eex Aphed Price reduced. Technical data available on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust hand spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the typical technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the frame size/frame width, and the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle fully raised) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Design: Solid cast iron stand in a C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel as it is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool mounting. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolts to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the position of the spindle). Width (stand): approx. 500 – 600 mm. Depth (base): approx. 800 – 1,000 mm.

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical data: Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Spindle speed: 30 – 3000 rpm Tailstock: MK 2 Crsdpfx Asx Htf Hsphod Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 Crjdpfxsza Tx Ss Aphed - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: used, Year of construction: 2008, functionality: fully functional, 1. OPS INGERSOLL Gantry Eagle 800 wire EDM machine with IMC5 handling system, manufactured in 2008. In very good condition and in operation until December 2025. Now dismantled. Includes 1 cooling unit M.T.A TAE EVO M10 (manufactured in 2012). 1 fire extinguishing system Kraft & Bauer FB703. Weight approx. 6,700 kg. Available for sale at a favorable price. Cjdey Ifu Nepfx Aphjrd Price significantly reduced!!!!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Codpfx Apjwqp Npohsrd Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Crjdpfx Aozcwupophjd Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: used, maximum load weight: 29,150 kg, overall weight: 3,900 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 08/2026, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,500 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, crane, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Schmitz 3-chamber freezer with tail lift (Vehicle 956) First registration: 18.05.2017 Permissible gross vehicle weight: 39,000 kg Unladen weight: 9,850 kg Payload: 30,150 kg MOT valid until: 08/2026, next inspection due: 02/2027 Overall length: 14,000 mm Overall width: 2,600 mm Overall height: 4,000 mm Internal length approx.: 13,700 mm Internal width approx.: 2,500 mm Internal height approx.: 2,500 mm Compartment 1, front, driver's side, approx. 7,000 mm long x 1,650 mm wide x 2,500 mm high with sectional door that folds down from the top Compartment 2, front, passenger's side, approx. 7,000 mm long x 850 mm wide x 2,500 mm high Crjdpfjy U Azgsx Aphod with sectional door that folds down from the top Tail lift ZEPRO 3,000 kg, mounted at the rear Refrigeration unit Vector 1950 MT City 2 evaporators at the front 6,759 operating hours 4,237 diesel hours 34 electric hours 2 x 12-ton 2-speed winch WABCO ABS Air suspension with raising and lowering function Schmitz coupling 1st axle: lift axle Tires 385/55R22.5, 1st tire approx. 40/40%, 2nd tire approx. 50/30%, 3rd tire approx. 80/50% 3rd axle: steering axle 1 pair of LED work lights on the side behind the 3rd axle, left and right 3 x LED reversing lights Price: €16,500.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €5,000.00 is the local court of Ludwigslust; for dispute values exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 16,700 h, spindle speed (max.): 6,300 rpm, total height: 2,750 mm, overall weight: 10,200 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 16,000 W, product length (max.): 6,600 mm, table load: 600 kg, number of axes: 5, This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details. Csdpfx Apjy I Aquehord • Spindle torque: 475 Nm (40% DC) • Tool changer: 60 positions (chain magazine) • Rapid traverse (X/Y/Z): 50 m/min • Feed rate (X/Y/Z): 50,000 mm/min • Table: NC swivel rotary table (d 630 mm) • Swivel range: -45° to +30° • Cooling: 40 bar internal coolant supply (IKZ) through spindle center • Power consumption: 50 kVA • Defect: Transmission damage Additional equipment • Chip conveyor: Scraper belt type, discharge height 956 mm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2019, Electrically heated rapid steam generator. The water level in the feed water tank is regulated by a float. A pump transports the feed water into the boiler, where the water level is regulated by an electronic control system. When a certain water level is reached, the resistance heating elements switch on automatically. The heating output can be adjusted in three stages on the housing. Additional title: electrically heated steam supply Saturated steam capacity: 82 kg/h Heating output 1-, 2- or 3-stage: 20+20+20 kW Heating area: 0,566 m2 Mox. operating pressure: 8 bar Power: 60 kW Current: 86.6 A Voltage: 400 V Frequency: 50 Hz Length: 1074 mm Width: 770 mm Height: 956 mm Weight: 340 kg Base construction: auf Füßen stehend, in Gehäuse Features: electric resistance heating; feed water vessel and desludging tank in the housing Credpfoxf D Igox Aphod

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Codpfx Apey Ea Hnehjrd Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Chuck:SAMCHULLY HS-12 (12 inch) Spindle Speed (Max.):3,000 RPM Spindle Nose:A2-8 Motor Power (Cont./Max):18.5 kW / 26 kW Max. Turning Ø x Turning Length:405 mm x 956 mm Tool Carrier (X/Z): Number of Tool Stations:12x BMT65 Max. Milling Ø:433 mm Travel (X/Z):245 mm / 1,040 mm Rapid Traverse (X/Z):24 m/min / 30 m/min Tailstock: Quill Ø:110 mm Quill Stroke:100 mm Equipment/Accessories: Additional Equipment:Tool touch probe (Tool Setter, swiveling) Collision Protection:Turret with Hirth coupling Year of Manufacture:2023 Weight:5,600 kg (according to configuration nameplate) Chip Management:Chip conveyor Electrical Connection:380 V / / 50/60 Hz / 42 kVA : :

Condition: ready for operation (used), machine/vehicle number: 13214814, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, pressing force: 250 t, year of last overhaul: 2010, Equipment: documentation/manual, Hydraulic press, 250 tons – fully functional, manufactured in former East Germany (DDR), model VEB Wema Zeulenroda. Crodpfozbyxnsx Aphsd

Condition: used, For sale: LK measuring table, granite Length: 3500 mm Width: 2100 mm Thickness: 500 mm Weight: approx. 10,000 kg Includes: air bearings Price for the LK measuring table: €4,500 Delivery conditions: Delivery time: in stock, subject to availability Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are sold in their current condition, as known to the buyer. We cannot offer any warranty on used machines, accessories, and parts. The METAL UNION CONDITIONS, deposited with the Registry of the District Court of Rotterdam, as they read according to the latest version deposited there, apply to all our quotations, all orders placed with us, and all agreements concluded with us. The delivery conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Csdpegbd Rtofx Aphjrd Oordeelsestraat 7 b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 1982, Turning machine Schaerer, model UD632 Center distance: 1120 mm Center height above flat ways: 320 mm Distance between centers: 660 mm Travel of compound slide (short): 450 mm Travel of compound slide (long): 420 mm Travel of cross slide: 710 mm Drive power: 15 - 22 kW Torque on the main spindle: 3000 Nm Max. workpiece weight between centers without steady rest: 1500 kg Max. workpiece weight between centers with a steady rest: 2200 kg Bed width: 460 mm Main spindle Spindle head with centering cone: 55022, size 8 Spindle in front bearing: 120 mm Spindle bore, through: 72 mm Front taper 1:20: 80 mm Internal taper: Morse 5 Spindle speeds: 1.8 - 2240 rpm Credpfx Ajgbd E Dephed Compound slide Number of feeds: 3 x 32 Longitudinal feed range A 1:1: 0.07 - 1.12 mm/rev Longitudinal feed range B 4:1: 0.31 - 4.5 mm/rev Longitudinal feed range C 24:1: 1.8 - 28 mm/rev Cross feed range A 1:1: 0.035 - 0.56 mm/rev Cross feed range B 4:1: 0.16 - 2.24 mm/rev Cross feed range C 24:1: 0.9 - 14 mm/rev Rapid traverse (longitudinal): 5000 mm/min Rapid traverse (cross): 2500 mm/min Lead screw Pitch: 12 mm Lead screw diameter: 50 mm Threads (metric) Number: 3 x 32 Thread range A: 1 - 12 mm Thread range B: 3.25 - 48 mm Thread range C: 21 - 288 mm Threads (imperial) Range A: 24 - 15/8 G/mm Range B: 6 - G/mm Range C: 1 - 1/12 G/mm Threads (module) Range A: 0.5 - 6 mod Range B: 2 - 24 mod Range C: 10.5 - 144 mod Threads (DP) Range A: 48 - 3 G/mod Range B: 12 - 1 G/mod Range C: 1 - - G/mod Compound slide Width: 310 mm Short: 465 mm Long: 1000 mm Top slide Travel without automatic feed: 150 mm Travel with automatic feed: 180 mm Tailstock Arbor diameter: 90 mm Arbor travel: 200 mm Weight of standard machine: 3460 kg Year of construction: 1982 Details: Machine is in very good condition. Double prism bed, therefore very accurate. Digital display HEIDENHAIN, model ND 780. Infinitely variable speed control! Chuck FORKARDT. Automatic lubrication system. Automatic tool post. Rapid traverse on all three axes. Chip guard. Machine lighting. Delivery conditions: Delivery time: in stock. Delivery: ex Baarle-Nassau. Payment: before collection. Prices: net, excluding VAT. Machinehandel De Leeuw BV cannot be held liable for differences between the technical data in this offer and the actual machine. Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, and used paternoster systems from Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard and automatic storage systems such as the Kardex Shuttle XP, XPlus and NT systems. Machinehandel De Leeuw BV Warehouse: Oordeelsestraat 7 b, NL-5111 PA Mailing address: Postbus 294, NL-5110 AG Baarle-Nassau / The Netherlands Phone: Mobile Antoine: VAT number: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, For Sale: BWF Leveling Mounts / Fixatoren, model RK 3 Dimensions (L x W): 240 x 150 mm Minimum height: 95 mm Maximum height: 101 mm Foot adjustment range: 6 mm Mounting hole diameter: Ø 25 mm Adjustment key size: slw 22 mm Weight: 11.1 kg Permissible maximum load: 24,000 kg Recommended machine dead weight: 4,000 kg Quantity in stock: 41 Price: on request via email Cedsxl Stdjpfx Aphjrd Delivery conditions Lead time: direct from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: upon order Prices: net, per piece, excluding VAT Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, as well as automatic storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Year of construction: 1971, condition: used, Peiseler, Model: 710, Diameter: 710, Pitch: 24, Year of construction: 1971, No.: 608, New price: €8,700. Delivery conditions: Delivery time: in stock, subject to prior sale. Delivery: ex works Baarle-Nassau. Payment: before collection. Prices: net, excluding VAT. Machinehandel De Leeuw BV cannot be held liable for any differences between the technical specifications in this offer and the actual machine. Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry and used paternoster systems from, among others, Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Visiting address: Oordeelsestraat 7b, NL-5111 PA Postal address: Postbus 294, NL-5110 AG Baarle-Nassau / Netherlands Tel: GSM Antoine: VAT no.: NL 801262458B01 IBAN no.: NL 20 RABO 0116605820 BIC/SWIFT code: RABO NL 2 Chamber of Commerce Tilburg: 18034279 Codpfx Apegbd D Roherd Website: E-mail: info@

Condition: new, New electro-hydraulic garage press. Model: HP-30. Capacity: 30 tons. Pressure: 25 MPa. Cylinder stroke: 260 mm. Distance between columns: 495 mm. Vertical table travel: 270 mm. Table dimensions (W x D): 300 x 460 mm. Machine dimensions (W x D x H): 1000 x 400 x 1400 mm. Connection voltage: 3 x 400 Volt. Motor power: 3 kW. Machine weight: 420 kg. Special price for in-stock machine: available upon request, via email only. Delivery conditions: Delivery time: in stock, subject to availability. Delivery: ex works, Baarle-Nassau. Payment: before collection. Prices: net, excluding VAT. Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the technical specifications in this offer and the actual machine. Machinehandel De Leeuw BV specializes in used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Visiting address: Oordeelsestraat 7 b, NL-5111 PA Mailing address: Postbus 294, NL-5110 AG Baarle-Nassau / The Netherlands Tel: Cjdpfegbd H Tox Aphjrd GSM: Email: info@ Web:

Condition: used, BWF Leveling mounts / Fasteners / machine adjusting feet, model FI Machine adjusting feet Dimensions L x W: 170 x 105 mm Minimum height: 83 mm Maximum height: 86 mm Hole through the adjusting foot: 20 mm Wrench for adjustment: 22 mm Csdpfxjgbd Nvs Aphsrd Number of pieces: 9 Price per piece, but all 9 must be purchased together: upon request Delivery conditions Delivery time: in stock, subject to availability Delivery: ex works Baarle-Nassau Payment: upon order Prices: net, per piece, excluding VAT Machinehandel De Leeuw BV cannot be held liable for differences between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are purchased in the condition in which they are and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. The METALUNION CONDITIONS, deposited with the registry of the District Court of Rotterdam, as they read according to the most recent version deposited there, apply to all our quotations, all orders placed with us, and all agreements concluded with us. The delivery conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 b 5111 PA Baarle-Nassau The Netherlands Tel: GSM Antoine: Website: E-mail: info@