Used Hang 114-30 for sale (26,624)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-20, empty load weight: 562 kg, maximum load weight: 2,138 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,885 mm, loading space width: 1,380 mm, loading space height: 1,800 mm, trailer brake: trailer braked, Year of construction: 2026, Martz Cooler 3015/2 C 2.7T refrigerated trailer, beverage trailer NEW VEHICLE Internal dimensions: 288cm x 138cm Internal height: 180cm Total weight: 2700kg Payload: 2138kg Braked tandem low-loader Overrun brake and parking brake by KNOTT 2 axles with 1350kg brake and reverse automatic Low chassis Fully welded, hot-dip galvanized steel frame 60mm side walls and roof with XPS core Insulated floor with 60mm XPS core Refrigeration unit with control display Temperature adjustable from +2 degrees to +10 degrees 230V connection Exterior color: White Optimal base for wrapping or lettering Rear double doors with locking mechanism Bow jockey wheel Recessed lashing points in the floor Interior light 13" tires Kedpezu Suyofx Aqqedr M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x U-shaped chocks 2x maneuvering handles 2x support legs at the rear OPTIONAL ACCESSORIES -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Extension cable -Complete LED lighting -Theft protection Further accessories available upon request! Plus freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock, ready for immediate delivery. The workshop is open from 8:00 AM to 5:00 PM on weekdays for all kinds of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: good (used), Equipment: 4 spindle Ksdpsd Tndfsfx Aqqedr

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Kdodpfxszntfmo Aqqjr Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Ksdpfx Ajznr Sxsqqodr With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm Ksdpfx Aqeztqt Soqjdr - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, functionality: fully functional, empty load weight: 126 kg, maximum load weight: 624 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,260 mm, loading space height: 300 mm, total length: 3,210 mm, total width: 1,690 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 230 NEW VEHICLE Internal dimensions: 230cm x 126cm Total weight: 750 kg Payload: 624 kg Side board height: 30cm Unbraked single-axle low-loader Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pole electrical system Rear lights with reversing light and triangular reflector Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Grid structure - Extension side boards 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without bow - High cover 80cm or 110cm - Mesh, coarse or fine - Spare wheel with bracket - Loading ramps Further accessories on request! Pictures are for illustrative purposes only and may show optional accessories that are subject to an additional charge. Plus registration certificate and freight to Gera 120 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Kdodszk E Rmopfx Aqqjr Get advice by phone, visit our website or come directly to our location.

Condition: excellent (used), For sale: a professional Constantin Hang Maschinenfabrik Göppingen bookbinding machine, model 167-11, manufactured in Germany. The machine is mounted on a large work table and equipped with a pneumatic control system and a foot pedal, allowing for convenient operation during use. Hang machines of this type were designed for professional bookbinding and production work. The design allows for easy handling and positioning of large sheets and other materials being processed. Specifications: Manufacturer: Constantin Hang Maschinenfabrik Model/Type: 167-11 Serial Number: 37886 Country of Manufacture: Germany Control: Pneumatic Operation: Foot Pedal Design: Stand-alone machine with work table Kodpszudblofx Aqqjdr Application: Bookbinding / Printing industry The machine is sold with the large work table shown in the pictures. Used condition. Shows normal signs of wear and tear appropriate for the age of the machine. The visual condition is consistent with the pictures. Made in Germany.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Kdsdpfjzvgkxsx Aqqsr Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations) Kdedpfozrmw Dsx Aqqsr

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm Ksdpfxjzh H Tds Aqqjdr - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: ready for operation (used), Heidenhain UVR 140D ID: 728 253-01 SN: 39240185B – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not show any mechanical damage, such as fractures, as these can no longer be repaired. In this case, an additional charge of €600 including VAT will be applied. Kjdpfozhqt Ijx Aqqedr Attention: You are bidding on a Heidenhain inverter, model UVR 140D, ID: 728 253-01, SN: 39240185B, offered as an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €600 including VAT will be issued.

Condition: good (used), Year of construction: 2020, operating hours: 994 h, Drivetrain Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg Lift height: 3.000 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 9,35 m / 2,36 m / 2,54 m Additional information Please contact Tobias Mayr for more information Ksdpfezg Ahhjx Aqqjdr

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Kedpfx Ajzt H Uxsqqedr Pressure: 3 tons Made in Germany.

Condition: excellent (used), Socket outlet, flush-mounted boxes, touch-protected boxes, Schuko socket, explosion-proof wall socket -Manufacturer: CEAG, Ex-wall socket 220-240V 16A unused original packaging -Type: GHG5114306R0001 -Number: 1x power outlet available Kdodoyilq Aspfx Aqqsr -Carton dimensions: 290/110/H175 mm -Weight: 1.1 kg

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 4,800 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, Efficiency, multifunction, and safety — this laser metal cutter is a combination of three. It's time to enhance your production efficiency by 1.5 times! Wattsan 1530 can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The standard equipment set includes a 6-meter-long pipe-cutting module and the cabin, which protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan characteristics Working area: 1500x3000 mm Kodpfxoiicxfo Aqqjdr Laser power: up to 6000 W Weight: 5500 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 3,700 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, It's time to enhance your production efficiency by 1.5 times! The Wattsan 1530 Tablechange laser metal cutter can operate materials as thick as 15 mm. It can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The loading rollers of the accurate Wattsan 1530 facilitate material input. Overall, it improves manufacturing efficiency by eliminating the need to waste time loading and uploading items. You can give our managers a call for additional details! Kdedpfx Aeiicv Ssqqer Wattsan 1530 Tablechange characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 3600 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: Kdodpsztn Umjfx Aqqor 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Kdedeztn Dbjpfx Aqqor Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: new, maximum load weight: 746 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,330 mm, loading space height: 1,685 mm, total width: 1,845 mm, total height: 2,300 mm, Year of construction: 2026, Refrigerated trailer - HK 132614-18 PF30 Price - €7,200 including 19% VAT, 6.4% delivery fee, and vehicle documents, as well as adapter cable, 2.5 m, for the refrigeration unit, and 2 sliding supports! Keeps your goods at a temperature between +5°C and +10°C. Suitable for: * Beverages * Cut flowers Description: The single-axle sandwich box for the refrigerated transport of your goods. The frame and chassis are made of hot-dip galvanized steel, giving the sandwich box a long service life. The floor of the sandwich box consists of special wood that is glued together with multiple layers of waterproof adhesive and has a non-slip phenolic resin coating. The body of this box consists of 30 mm thick sandwich panels with a core of foamed polyurethane and a double-sided facing of galvanized and polyester powder-coated steel sheet. The edges of the sandwich box are made of anodized aluminum, as is the torsion-resistant rear portal and the rain gutter at the rear. The door hinges, the lockable rotating bolt lock, and the door latch are made of stainless steel. Seals made of plastic are mounted on the doors, which enable the watertight transport of your goods. The single-axle sandwich box from Humbaur is an indispensable aid for the safe, refrigerated transport of goods. Technical data: * Trailer type - Single-axle * Construction type - Sandwich * Weight - 554 kg * Gross vehicle weight - 1,300 kg * Payload - 746 kg * Internal length - 2,515 mm * Overall length - 3,920 m * Internal width - 1,330 mm * Overall width - 1,845 mm * Internal height - 1,685 mm * Overall height - 2,300 mm * Loading height - 535 mm * Tire size - 14 inches Kedpfjzdf Tvjx Aqqedr Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin connector * 15 mm thick floor panel * Sandwich body made of PurFerro, 30 mm thick * Single-leaf door at the rear * Rotating bolt lock and hinges made of stainless steel * Support wheel * Refrigeration unit

Condition: used, machine/vehicle number: 27977, Ösmaschine - Eyeletting machine Hang 103LOSerial-No. 27977 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kjdpfoh Axgcsx Aqqodr On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 11388, Ösmaschine - Eyeletting machine Hang 103SPSerial-No. 11388 Online-Video-Inspection by Skype-Video Kdedpfxoh Axggj Aqqor We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 14889, Ösmaschine / Eyeletting machine Hang 103 SP SN. 14889Serial-No. 14899 Fußbetrieb / Foot operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kdsdpfxsh Axz Nj Aqqer

Condition: used, machine/vehicle number: 71789, 2-Spindel-Papierbohrmaschine / 2-head spindle paper drilling Hang 136DSerial-No. 71789 Seitenanschlag Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Kdodpfxsrmulys Aqqsr Stapelhöhe / Stacking height max. 50mm Bohrdurchmesser / Drill diameter 2 – 14 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Automatische Ösmaschine / Automatic Eyeletting machine Hang 103 LOK Serial-No. 24707 Für kleine bis mittlere Serien-Auflagen / For small to medium series-batches Arbeitstiefe / Working depth 130 mm Stückzähler / Counter Auslösung durch elektrischen Fußschalter / Release via foot switch Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Kdjdpfjv D N H Nsx Aqqor

Condition: used, Ösmaschine / Eyeletting machine Hang Piccolo 101 Serial-No. ET107 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Kdodpfx Ajxlr Syeqqer On Stock Emskirchen/Nürnberg - Available Immediately - Can be test