Used Harrison Alpha 1350Xs for sale (283)

Year of construction: 2007, condition: ready for operation (used), Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. Dcsdpfx Alof H Dlbo Neh

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Dcedpfx Alox Utc Ij Neh Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: used, functionality: unexamined, Ferwood Code: RU0000722 - Manufacturer Code: SP 100S-MF1-7 - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Dcjdpfev Azigox Al Nsh

Condition: used, functionality: unexamined, Ferwood Code: RU0001205 - Manufacturer Code: SP 100S - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dedsv Du Apopfx Al Noch

Condition: used, functionality: fully functional, Ferwood Code: RU0011542 - Manufacturer Code: SP100V-MF1-7-2H0-2S - Condition: Used - Functionality: Fully functional - If interested we offer a revision service, contact us. Dcsdpov I Dh Aefx Al Noh

Condition: used, functionality: unexamined, Ferwood Code: RU0005404 - Manufacturer Code: SP 100-MF1-10 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dcjdpfx Aev Eflwjl Njh

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, machine/vehicle number: S/N:01130421-2.24, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 610 kg, feed length X-axis: 340 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, type of cooling: water, input current: 16 A, protection type (IP code): IP20, laser power: 600 W, input frequency: 100 Hz, laser wavelength: 1,070 nm, Equipment: documentation/manual, type plate available, Offered is a virtually new laser welding machine from Alpha Laser including accessories (water cooler, welding fume extraction, lifting table, and much more). Average. Power 600 W - peak pulse power CW: 9kW The ALFlak systems consist of (basic equipment): - Laser with processing head and Leica observation optics - UV glare protection - Multifunctional foot switch - Lighting - WIN Laser software "BKS" - Joystick Dodpfx Aljvu Tdgj Nech Laser: pulse and CW mode, pilot laser Motorized movement system Machine axes: 3 or 4 Travel range (X, Y, Z) approx. 320 x 330 x 370 mm Arm deflection/working distance: approx. 1400 mm Incl. standard beam deflection unit (600-0365A) Incl. 12.1" touchscreen new version (300-1171C) With door acknowledgement on the display holder Incl. magnetic beam protection plate (701-0687A) If you are interested, I will be happy to provide you with a detailed offer.

Condition: excellent (used), Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Dcsdpeu R Udwofx Al Noh Turning Length: 680MM Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 Tailstock quill travel: 95 mm Total power requirement: 1.5 kW Machine weight approx .: 410 kg Dimensions L x W x H: 1.6 x 0.8 x 1.4 m The machine is equipped with an electronic position reading Insize ISL-DR2

Year of construction: 2019, condition: as good as new (ex-display), We have this machine since 2019, we worked just a few months. Machine with automatic bags dispenser, can put 3 labels by one pass (2 labels first side, 1 label another side). Voltage 220V/1PH 50/60HZ Total power 3.7KW Max. current 17A Label height 10-120mm Label length 15-350mm Paper roller inner diameter 76mm Dsdoi Dxupepfx Al Noch Paper roller outer diameter Within 360mm Labeling objects diameter 15-150mm Labeling objects length 20-250mm Labeling speed 12-35M/min Conveyor belt speed 0-35M/min If you have an questions on this, please do not hesitate to contact us.

Condition: used, Year of construction: 2008, functionality: fully functional, Control: GE FANUC Alpha X Distance between centers: 1250 mm Z-axis travel: 1156 mm Swinging diameter over bed: 400 mm Swinging diameter in the bed gap: 585 mm Width of the bed gap (from the faceplate): 165 mm Dodpfxjzb H I No Al Nech Swinging diameter over the faceplate: 246 mm Spindle bore: 55 mm Spindle nose: Camlock D1-6" Spindle mounting: MK4 Spindle speed: 297 to 2700 rpm Main motor: 7.5 kW Speed range: 69–2700 rpm Tailstock quill stroke: 140 mm Tailstock quill diameter: 73 mm Tailstock mounting: MK5 Height of spindle center above the floor: 1086 mm Tool turret: Duplomatic CE compliant Machine in good, operational condition Included in the delivery: Manual three-jaw chuck TDG Ø200 + jaws Manual three-jaw chuck TDG Ø250 + jaws Tool holder VDI 30 + tool holder 2 steady rests

Condition: good (used), Year of construction: 2014, Approx. 4 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: only €2,950.00 (net)! Manufacturer: Weber Dcodpfx Alozbylbj Neh Type: Alpha Compact Year of manufacture: 2014 Includes stand and applicator 100 – 240VAC Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31i-A5, total height: 2,336 mm, total width: 1,565 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 5,500 W, number of slots in tool magazine: 21, tool weight: 2,000 g, product length (max.): 2,027 mm, number of axes: 3, This 3-axis FANUC ROBODRILL Alpha-T21iFL was manufactured in 2008. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a rapid traverse rate of 54,000 mm/min and a spindle speed of 10,000 RPM. If you are looking to get high-quality drilling, tapping, and milling capabilities, consider the FANUC ROBODRILL Alpha-T21iFL vertical machining centre we have for sale. Contact us for further details. • Control Model: FANUC 31i-A5 • Table T-Slots: 3 • T-Slot Size: 14 mm • T-Slot Pitch: 125 mm • Distance Table to Spindle Nose: 250 – 580 mm • Rapid Traverse Rate: 54,000 mm/min • Feed Rate: 1 – 30,000 mm/min • Acceleration: 1.5 G • Continuous Spindle Power: 3.7 kW • Spindle Taper: BBT30 Big Plus • Tool Holder: BT30 • Tool Magazine Capacity: 21 • Maximum Tool Length: 250 mm Djdpfxszb Iq So Al Njch • Tool Change Time: 1.6 sec • Positioning Accuracy: 0.006 mm / 300 mm • Repeatability: ±0.002 mm • Memory Capacity: 512 KB • Display Size: 10.4 in • Signal Lamp • Coolant Tank Capacity: 200 L • Power Supply: 400 V / 50 Hz • Air Pressure Requirement: 0.35 – 0.5 MPa • Power-On Hours: 24,133 h • Run Time: 10,294 h • Application: High-Speed Drilling, Tapping and Milling of Precision Components

Condition: used, Year of construction: 2007, Bundle delivery system Palamides alpha 700 Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Dcsdpfx Aoy N Un Uel Njh Automatic format adjustment in running direction

Condition: used, Year of construction: 2010, Bundle delivery system Palamides alpha 700 Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Dodpfxoy N Up Ej Al Njch Automatic format adjustment in running direction

Condition: used, Year of construction: 2015, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Dsdeugpk Uspfx Al Njch Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge Dcjdpou Icnfefx Al Noh *

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm Dsdpsw S Efzofx Al Noch z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Dcedpfozblhnjx Al Nsh Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: excellent (used), functionality: fully functional, Workshop + Bending press / straightening press Grattieri (Italy) 100 t, CE certified. Year of manufacture 1995, very little use, almost like new. Equipped with multiple prisms. Working width 1.5 m. Dcedpfx Aleyv In Uo Njh Stroke 400 mm. Rear and side protective grilles can be removed for longer parts. The work surface and bending prism can also be removed. Can be inspected while powered on. Free loading, location: D-88433 Schemmerhofen.

Condition: used, This listing is for PCR Max Alpha Thermal Cycler The unit is in full working condition and ready for immediate use Compact and efficient thermal cycler designed for accurate DNA amplification. Features intuitive controls, uniform temperature distribution, and dependable cycling performance suitable for molecular biology workflows. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Dcsdsy Hw Skjpfx Al Noh Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders Djdpfxjx Tvize Al Noch

Condition: used, Year of construction: 2000, machine/vehicle number: M000000Y5670, functionality: unexamined, Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Manufacturer: TEL Tokyo Electron Model: Alpha-8SE-E Dedsygvzvopfx Al Noch Manufactured: 11.2000 Serial No.: M00000Y5670 No books or documentation included. Pumps/Motor: 2 x Toshiba 3-phase induction motor, 480 Volt, 60 Hz.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Dsdpoyfl U Nefx Al Nsch

Condition: good (used), Year of construction: 2002, LVD work height max. 900 mm ALPHA 1012 Control CADMAN CNC punching pressure 16 t plate thickness 8 mm Dodpfeyx Itcsx Al Nsch plate length 1250 mm plate width 1000 mm total power requirement 13 kW weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 mm

Condition: used, TECHNICAL DETAILS Dcsdjxqrqaopfx Al Nsh TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] - Machine height : 2270 [mm] - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit - Filtration unit