Used Heat Cartridge for sale (15,867)

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. The boiler has been dismantled and is available immediately. Godpfxsz Eg Sro Al Ssbu The boiler can be operated with wood chips and pellets.

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Gjdpfx Alexbgrgs Sebu Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Gbedpfxoz Rxgys Al Sju Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V

Condition: used, This listing is for a IKA RCT RET B C Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT RET B C Heating Magnetic Stirrer is a reliable laboratory device designed for precise heating and stirring tasks. Combining a robust heating plate and magnetic stirrer, it ensures accurate temperature control and efficient sample processing. Key Features: Durable Heating Plate: Made of aluminium alloy, the plate ensures optimal and uniform heat transfer for consistent sample heating. Temperature Control: Offers a maximum temperature of 310°C with a temperature control mode for faster and precise medium heating. Versatile Magnetic Stirrer: Features a speed range of 50-1500 rpm, capable of handling up to 20 L stirring volume. Suitable for a wide range of laboratory applications. Safety Features: Godpfxjxxz T Ts Al Sobu Includes a fixed safety circuit that shuts off the unit at 370°C and a hot surface warning to prevent accidental burns. Digital Display: Allows exact temperature and speed settings, even when the device is switched off, ensuring ease of use and precision. Advanced Connectivity: Equipped with USB and RS232 interfaces for remote control and documentation of test parameters via a PC. Compatible with labworldsoft laboratory software for enhanced functionality. Technical Specifications: Motor Rating Output: 9 W Heat Output: 600 W Temperature Range: Room temperature + device self-heating to 310°C Speed Range: 50-1500 rpm Stirring Bar Length: 20-80 mm Set-up Plate Material: Aluminium alloy Set-up Plate Dimensions: Ø 135 mm Dimensions: 160 x 85 x 270 mm Weight: 2.5 kg

Condition: used, This listing is for a IKA RCT CL S2 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT CL S2 Heating Magnetic Stirrer is a reliable laboratory device designed for efficient stirring and heating of various substances. Part of the IKA RCT series, it combines precision, safety, and durability to meet the demands of modern laboratories. Key Features: Precise Temperature Control: Offers a temperature setting range of 0 - 310°C with a resolution of 1 K, ensuring faster and accurate heating of the medium. Wide Speed Range: Adjustable speed from 50 to 1500 rpm, with a setting accuracy of 10 rpm, making it versatile for different stirring needs. Safety Features: Equipped with a hot top indicator, digital error code display, and an adjustable safety circuit for heating plate temperatures (50 - 360°C) to prevent overheating and ensure safe operation. Efficient Magnetic Stirring: Utilizes a strong motor, capable of stirring volumes up to 20 L (H₂O), suitable for large-scale or intensive laboratory tasks. Durable Heating Plate: Constructed from aluminum alloy, the heating plate delivers optimal and homogeneous heat transfer for consistent results. Advanced Connectivity: Includes USB and RS232 interfaces for easy control and documentation of test parameters using a PC, and compatibility with labworldsoft laboratory software. Technical Specifications: Dimensions: 160 x 85 x 270 mm (W x H x D) Weight: 7.29 pounds Wattage: 600 watts Material: Aluminum alloy Brand: IKA Gedpfx Aljxxz Uds Sjbu Manufacturer: IKA WORKS, INC

Condition: used, Candles: 12 cartridge height [inch]: 30 cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring closure: parrotlip Gbedpfsz N Eqijx Al Sou Fittings: draining outlet, manometer, deaeration

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition Gbedewuqfyspfx Al Ssu

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Gbjdpfx Aoz Ehc Ejl Sou Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Application areas: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating in the cold season Fuel: Heating oil EL Rated heat output: 135 kW Rated heat input: 150 kW Oil flow rate: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Gbedoxwkw Eopfx Al Sou Weight: 270 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Used industrial dust extraction system, complete with a Dynair 7.5 kW fan, electrical control panel, and filtration unit. No disassembly required. Gbjdpfx Asz Rpltel Seu Available immediately. Complete system as shown in the picture. Located in Rotterdam, the Netherlands. Delivery: EXW Rotterdam. Worldwide inquiries are welcome. Additional information and photographs are available upon request.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gbjdpfxewb A Hio Al Seu Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg Gjdpez Iubmsfx Al Sjbu The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: used, This listing is for 1 of 2 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. Gbsdpfxjxx Ai No Al Ssu The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Consumption: 302 kW. The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition. Gsdpszyubysfx Al Sobu

Condition: used, This listing is for the Velp Scientifica T Are F20520170 Heating Stirrer The unit is in full working condition and is ready for immediate use Overview: Velp Scientific T.ARE Gbedpoxx Akmofx Al Sou The T.ARE is part of Velp Scientifica’s line of heating magnetic stirrers—lab devices combining a hotplate and a magnetic stirrer. These instruments are commonly used to heat and mix solutions efficiently and safely. Key Features & Specs for T.ARE According to available technical data: Power: Approximately 1300 W—making it one of the most powerful in the ARE series Voltage Options: Available in 115 V or 230 V, 50–60 Hz configurations Dimensions: About 190 × 110 × 245 mm and weighing roughly 3.1 kg While specific details on maximum temperature or stirring volume for T.ARE aren't listed, other Velp ARE models typically reach up to 370 °C, handle up to 15 L of water, and provide stirring speeds up to 1,500 rpm Given its higher wattage, the T.ARE likely offers performance on par with or exceeding those specs

Condition: good (used), ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Gbodpfjx Ihlksx Al Sou Connection pressure: 20 mbar Rated heat input QN: 27 kW Rated heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Airflow rate: 2700 m3/h Protection class: IP20 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Gbsdpfox Ihiisx Al Ssu Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 28 kW (38.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 540 mm, total length: 1,470 mm, total height: 1,610 mm, warranty duration: 12 months, heating capacity: 26 kW (35.35 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 30 28/26 kW Cooling capacity: 28 kW / 7.96 tons (12/7 — 35°C) Heating capacity: 26 kW / 7.39 tons (40/45 —7°C) Year of manufacture: 2016 Options: Hydralic module. Heat pump Hydraulic module: 1 pcs. water pump (EBARA) Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1,47 x 0,54 x 1,61 m Weight: 281 kg Working hours: 3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Gbodpfx Aloy Enrrs Seu - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), DCN JetCook vessel500 litre 650 litres, direct from closed Babyfoods facility. Gbjdpoy I Di Ssfx Al Sou

Condition: used, This listing is for a Grant UBR2 Heat Block. The unit is in full working condition and is ready for immediate release. The Grant UBR2 Heat Block is a reliable and efficient heating solution designed for various laboratory applications, including DNA extraction, enzyme reactions, and sample incubation. With precise temperature control and a robust design, the UBR2 ensures consistent heating for optimal experimental results. Key Features: Temperature Range: Operates from ambient to 100°C, providing versatility for a wide range of applications. User-Friendly Controls: Equipped with a large LED display and intuitive controls for easy temperature setting and monitoring. Gjdjxxz Hyjpfx Al Sjbu Rapid Heating: Quickly reaches set temperatures, minimizing wait times and enhancing productivity in the lab. Uniform Heat Distribution: Designed with a high-quality aluminum block that ensures even heat distribution across all wells, promoting consistent sample heating. Versatile Block Compatibility: Accepts various block inserts (available separately) to accommodate different tube sizes and formats, making it adaptable for different experiments. Safety Features: Incorporates over-temperature protection and a safety cut-off feature to prevent overheating, ensuring safe operation. Applications: DNA & RNA Preparation: Ideal for use in molecular biology applications, including DNA extraction and purification processes. Enzyme Reactions: Perfect for incubating samples at controlled temperatures for enzyme assays and reactions, ensuring optimal conditions for activity. Sample Incubation: Suitable for incubating various samples, from cell cultures to biochemical assays, requiring consistent and reliable heating. Thermal Cycling: Can be used for specific thermal cycling applications where controlled heating is essential for reaction efficiency.

Condition: used, This listing is for a Grant QBT1 Heat Block. The unit is in full working condition and is ready for immediate release. The Grant QBT1 Heat Block is a compact, highly precise dry block heater designed for laboratory applications that require consistent temperature control. This unit is ideal for heating and incubating samples in 1.5 mL Eppendorf tubes, and it is known for its reliability and ease of use. Key Features: Wide Temperature Range: The heat block operates within a temperature range of ambient +5°C to 150°C, making it suitable for a variety of laboratory applications. Precision Temperature Control: With ±0.1ºC temperature stability at 37°C and uniformity of ±0.1ºC within the block and ±0.2ºC across similar blocks, it ensures accurate temperature maintenance for sensitive samples. Digital Display: The display has a 1°C resolution, allowing for easy monitoring and precise setting of the temperature. Gbodpfx Aoxxz Uqsl Seu Heating Block Capacity: Equipped with a block for 24 x 1.5 mL Eppendorf tubes, it provides ample space for small sample incubation's, making it ideal for molecular biology and biochemistry experiments. Efficient Heating: The heat block has a heat-up rate of 40 minutes to reach the maximum temperature from ambient conditions. Compact and Portable: With dimensions of 205 x 180 x 122 mm and a weight of 3.6 kg, it is a compact unit that fits easily on a laboratory benchtop.

Condition: used, This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and is ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Gedpfx Aloxxz N Is Sebu Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany Gsdezxqd Ispfx Al Sobu An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: used, This listing is for a Grant QBA1 Heat Block . The unit is in full working condition and is ready for immediate release. The Grant QBA1 Heat Block is a specialized component of the Grant Instruments QB Series Dry Block Heating Systems, designed for optimal temperature management and versatility in laboratory applications. This heat block is particularly beneficial for users needing reliable and precise heating for various biochemical and molecular biology experiments. Key Features: Interchangeable Blocks: The QBA1 Heat Block is designed to fit seamlessly into the Grant QB Series Dry Block Heating Systems. This interchangeability allows for quick transitions between different blocks depending on the specific requirements of each application, enhancing workflow efficiency. Precision Temperature Control: One of the standout characteristics of the Grant QB Series is its ability to deliver excellent temperature control and uniformity across the heating surface. This precision is critical for experiments that require exact temperature settings, such as enzyme reactions and temperature-sensitive processes. Gbsdpfx Aloxxz Rrj Sou Wide Range of Applications: Enzyme Digestions: The QBA1 Heat Block is ideal for applications requiring consistent and controlled heating for enzyme activity, facilitating reactions at optimal temperatures. Enzyme Activity Studies: It provides a stable platform for studying enzyme kinetics and other parameters, ensuring accurate and reproducible results. Nucleic Acid Hybridizations: The heat block is suitable for heating samples needed in nucleic acid studies, making it useful for hybridization assays and PCR preparations. High-Quality Design: The Grant QB Series Dry Block Heating Systems, including the QBA1 Heat Block, are constructed from robust materials that ensure durability and reliability. This quality design withstands the rigors of laboratory use, making it suitable for demanding environments where consistency is crucial.

Condition: good (used), Reinhardt LTV 100 Oven, 200°C Manufacturer: Reinhardt Type: LTV 100 Usable volume: 0.65 m³ Steam volume: 1.04 m³ Output: 10.56 kW Fresh air exchange rate: 1 l/min Loading system with 7 supports, size W x D: 770 x 850 mm Voltage: 380 V Operating temperature: 50°C - 200°C Nominal temperature: 130°C Dimensions H x W x D: 2050 x 1650 x 1180 mm Chamber: H x W x D: 1000 x 800 x 950 mm Godpfjxbf T Nsx Al Sebu You can find more new and used items in our shop! International shipping costs available upon request!