Used Holzmann Vs 25/5Pm 2/26 for sale (82,470)

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: Kjdjzfim Iopfx Acpedu - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Kedpfx Acjuxfu Nspjdu Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, functionality: fully functional, Year of construction: 1991, Used 2.5-meter plate shear from Safan Type: VS 255 6 Capacity: 2550 x 6 mm Kdedpfj Aazw Sex Acpeu Electric NC back gauge Back gauge length: 1000 mm Year of manufacture: 1991

Condition: used, Technical specifications: Max. dimensions of the glued component: 2500x1200 mm Kodpfxjziacno Acpedu 2 vertical clamps 2 side clamps Maximum clamping force: 2700 kg Pneumatic clamps Overall dimensions: Length: 2600 mm Width: 1600 mm Height: 2100 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 107731, Equipment: cooling unit, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Kdjdpfx Aozzc U Decpou Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2019, Panel saw Manufacturer: Holzmann Model: K5-320VFP-2000 Year of manufacture: 2019 Technical data Note: Kjdjzuy Rispfx Acpodu The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, New: Yes Year of construction: 2024 Kjdpoz S Dausfx Acpodu Attachment suited for: Agricultural machines

Condition: used, Technical data: Max planing width: 240 mm Max planing height: 130 mm Ksdpfx Acjv Um Tbopodu Spindle diameter: 400 mm Number of spindles: 4 Spindle order: bottom right left top Each spindle on a separate engine Toothed roller in the table before the first head Number of upper steel pulling rollers: 4 Number of upper rubber pulling rollers: 1 Smooth feed adjustment Feed on cardans Worktable lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Total power: 28 kW Overall dimensions: Length: 3780 mm Width: 1800 mm Height: 1800 mm

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Kdsdpjzn Ak Ejfx Acpju Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Technical data: Kjdsyv At Ejpfx Acpsdu Max cutting height: 300 mm Max cutting width: 675 mm Wheel diameter: 700 mm Blade adjustment range: 5140–5010 mm Max blade width: 40 mm Min blade width: 5 mm Worktable dimensions: 850x1100 mm Extraction port diameter: 110 mm Emergency stop switch Motor power: 3 kW Voltage: 400 V Overall dimensions: Length: 850 mm Width: 1280 mm Height: 2300 mm

Condition: as good as new (ex-display), Code: N0340 Brand: HAMMER - FELDER - AUSTRIA Model: A 2 - 26 - CE Standard 2-Works combined machine (surface planer /thickness planer ) – CE Standard Single-phase motor Planer table width 260 mm Thickness height 184 mm Tilting planer guide Max chip removal 3 mm Kdsdpfxszqrvcj Acpeu Wheels on the base

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Kjdpez S Euaefx Acpedu Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers Kodpfx Aszkv R Djcpedu An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Kodpow Rcrcefx Acpodu Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: used, Technical specifications: Kdjdpfjzynkbex Acpju Number of pistons: 4 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 2500 x 1300 mm Clearance: 400 mm Hydraulic clamping system Safety switch Engine power: 1.5 kW Engine speed: 2800 rpm Power supply: 400 V Machine dimensions Length: 3260 mm Width: 1560 mm Height: 2000 mm

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply Ksdpfx Aezn Ak Sjcpedu 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, Kedpfx Aegzzwnecpedu - rectangular stop for setting the material on both sides of the working table, -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Condition: used, machine/vehicle number: 14038, Rotor diameter: 260 mm Rotor width: 260 mm Number of rotor blades: 3 Number of stator blades: 2 Inlet cross-section: approx. 350 x 550 mm Kdodpfx Acsyr Tzdepeu Drive motor: 7.5 kW

Condition: good (used), Year of construction: 1992, Travel range, X-axis: 1500 mm Travel range, Y-axis: 420 mm Travel range, Z-axis: 400 mm Clamping area: 2 x 700 mm x 420 mm Max. table load: 800 kg Number of tools: 2 x 36 pieces Tool holder: SK 40 Rapid traverse rate: 25 m/min Weight: 9 t Space requirement: 6.50 x 4.5 x 3.1 m Low speed: 50 RPM High speed: 7500 RPM (stepless) Rapid traverse: 25000 mm/min Control system: Siemens Sinumerik 820 M GA 3 + 2 x single-axis stepper motor control Sama SFI Current clamping system: per station, 1 NC indexing head with counter bearing, support plate, rotary table, and hydraulic clamping, and 4-axis indexing head with rotary table in special design and separate NC control Clamping system: 4-axis indexing head consists of 4 x 2-jaw chucks, clamping pressure 12 bar, manufacturer: Hofmann HMR 4/kombi 294/4 Kodpfx Acjcph Tmopodu Tool breakage monitoring system: Meutrsuix ATM B310 Renishaw measuring probe system (without probe) Coolant system with chip conveyor, filter system, and fine filter

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt Kdodpfxswva Ias Acpsu driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Condition: used, Technical specifications: Min. length of cut elements: 600 mm Max. length of cut elements: 3300 mm Min. diameter of processed raw material: 60 mm Max. diameter of processed raw material: 380 mm Min. width of cut log: 50 mm Max. width of cut log: 300 mm Wheel diameter: 600 mm Feeder stroke: controlled by a frequency inverter Number of heads: 2 Power of head motors: 2 x 4 kW Feed motors: 2 x 0.75 kW Kdsdpfxjzza N Es Acpeu Overall dimensions: Length: 4900 mm Width: 1900 mm Height: 2000 mm

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Ksdeia Rtdspfx Acpsdu Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Swing over bed 400 mm Kdodpfsq Dll Djx Acpou Distance between centers 650 mm Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2023, condition: new, functionality: fully functional, You can view this machine at the Anuga Tec Cologne until March 22nd. Kodpfx Acsivikxopodu Hall 8, Stand B 079, PVS. Chopping and emulsifying machine for various products, such as meat, sauces, and soups. Also suitable for pesto, ketchup, and mayonnaise. Re-work applications (baked goods and other products). Nut pastes. Pharmaceutical applications (in heparin production).

Condition: good (used), Year of construction: 2002, Machine type: CNC turning lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Available immediately Ex works, for self-disassembly Optional, we can offer disassembly and loading services. Ksdpfekyrwwjx Acpjdu