Used Honsel & Co. 722 for sale (28,074)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Lsdpfx Anezg Dx Ujxehl Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Lhodpfozrmigex Anxol Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2019, type of cooling: air, Equipment: cabin, Trotec Rayjet 50 – CO₂ Laser System for Engraving & Cutting The Trotec Rayjet 50 is a compact and reliable CO₂ laser ideal for precise engraving and cutting applications. This system is an excellent choice for small businesses, workshops, educational institutions, and professionals seeking to enter laser processing. Currently, 2 units are available from stock. Manufacturer: Trotec Model: Rayjet 50 Year of manufacture: 10/2019 Technical specifications: Lhsdpfx Asyhyu Henxsl Laser source: CO₂ laser Laser power: 30 W Working area: 500 × 300 mm Maximum material height: 145 mm Engraving speed: up to 2.0 m/s Positioning accuracy: 0.01 mm Resolution: up to 1,000 dpi Cooling system: Air-cooled Interface: USB / Ethernet Software: Compatible with standard graphic programs (e.g., CorelDRAW) Dimensions (W × D × H): approx. 870 × 670 × 430 mm Includes extraction system 8401 Atmos Cube All information provided without guarantee. Subject to prior sale.

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. Lhedpszmqa Eofx Anxjl The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount Ljdpfx Ajyfucvonxehl - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Lsdpfxjzt Sb Ds Anxohl Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: good (used), Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Ljdpfx Anszligzexohl Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; Lhedowqcrqspfx Anxel - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: used, mileage: 1,431,000 km, power: 355 kW (482.67 HP), first registration: 05/2018, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 4,000 mm, loading space length: 7,530 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Additional information: * Payload: 13315 kg * Type | First axle: Michelin R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Maximum axle load | First axle: 8000 kg * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth outer left | Second axle: 40% * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 30% * Tire tread depth outer right | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 11500 kg * Maximum axle load | Third axle: 7500 kg * Wheelbase: 620 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 1500 kg * Price on request: Yes * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes * Dual tires | Second axle: Yes * Driven | Second axle: Yes * Steering | Third axle: Yes * Differential lock | Second axle: Yes * Position | First axle: Front * Brand | First axle: Other * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes * Reduction | Second axle: Single reduction Additional equipment: * 2-pedal control * 27 MC / CB * Adaptive cruise control * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Automatic climate control * DAB radio * Differential lock * Double fuel tank * Electric windows * Electronic Braking System (EBS) * ESP * Cruise control * Homepage * Intarder * Isofix * Air conditioning * Refrigerator * Leather seats * Air suspension * Air horn * Navigation system * Particle filter * Radio/CD player * Retarder * Disc brakes * Sunroof * SemCollection * Auxiliary heater * Auxiliary air conditioning * Central locking * Fifth wheel coupling Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Lhjdpfxoy Sdt Eo Anxjl Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Lhsdpfsx Ehg Tox Anxel

Condition: used, Year of construction: 1984, Roller diameter: 600 mm Blade width: 25 x 6/10 mm Max. cutting height: 295 mm Cutting width: 580 mm Table height: 940 mm Table size: 860 x 600 mm Max. blade length: 4580 mm Lhsdozb N Tuspfx Anxel Stand side on the left Belt guide on the top and bottom Table can be tilted with parallel stop Motor: 2.2 kW Dust extraction connection diameter: 100 mm Dimensions: 1210 x 750 x 2077 mm Weight: approx. 350 kg Location: Nattheim

Year of construction: 2023, condition: excellent (used), For sale: Friul Co C3 Dough Mixer and Kneader – 2023 model, like new We are selling a Friul Co C3 industrial dough mixer and kneader in excellent technical and cosmetic condition. This machine is ideal for bakeries, pizzerias, pasta factories, and artisanal bakeries where fast, consistent, and reliable dough processing is essential. Technical specifications: Manufacturer: Friul Co Srl (Italy) Model: C3 Year of manufacture: 2023 Power supply: 230 V Power: 1840 W Single-phase version IP54 protection Lodpjzrnd Eofx Anxshl Stainless steel construction Movable, lockable wheels Key benefits: ✅ Mixing and kneading in one machine ✅ Consistent dough processing, excellent end result ✅ Easy to operate and clean ✅ Robust, industrial design ✅ Reliable Italian manufacturing ✅ 2023 model, modern design The machine is perfectly suited for processing bread, pastry, pizza, and other yeast-leavened doughs. The automatic operation significantly reduces the need for manual labor and increases productivity. The machine is in like-new condition (approximately 5 hours of use). For more information or to schedule an appointment, please do not hesitate to contact us!

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Lhedpfozcxbwsx Anxsl Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Lhjdpfx Aepu A D Asnxol Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: excellent (used), functionality: fully functional, control type: NC control, actuation type: hydraulic, controller manufacturer: ESA, working width: 3,050 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, type of input current: three-phase, Equipment: emergency stop, finger protection, foot remote control, type plate available, OLEOTECNICA hydraulic guillotine shear Working cutting length: 3050 mm Maximum cutting thickness: 4 mm Lhedpsyqwhfsfx Anxsl ESA programmer for dimension display Motorized backgauge Safety guards.

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Lsdpfx Ajx R Uzdonxehl Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system Ledpfx Ansziznfoxohl - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Ledpfx Ajzqucfonxshl Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in Lhedpfx Aneznwu Ssxol live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D Lhjdpfx Anon Utt Hsxol * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition Lhjdpfx Anjzinzlsxjl

Condition: good (used), machine/vehicle number: 73185, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Multi-deck oven, electric oven Miwe Condo Model: Type: CO.3.1208 AS control system Individually adjustable bottom and top heat 3 baking levels, 1200 x 800 mm 3 ovens with steam function Mobile base with locking mechanism Connection: 400V, 3 x 16A CEE plug Water connection: 3/4 inch, water drain: DN 40 Dimensions: 1500 x 1300 x 1950 mm (W x D x H) Ledpfxexduxaj Anxshl Used oven Visit our large bakery machinery warehouse!

Condition: used, Year of construction: 2008, total length: 26,000 mm, Colour: White Empty weight: 9.000 kg Price: On request - Details: - └ Description: Includes the input/output system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 36 - System/software: WoodWOP - Safety feature: Safety light curtain, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Elmo Rietschle - └ Type: 2BL2141 - └ Connection diameter [mm]: 50 - Tools included: Yes - CNC options: Unloading system, Offcut conveyor, Loading system, Label machine, Manual control - CNC documentation available: USB stick - Table length [mm]: 2500 - Table width [mm]: 1500 - Working range X [mm]: 5800 - Working range Y [mm]: 1600 - Z-axis working range [mm]: 535 - Voltage [V]: 400 Ljdpszhr Rzefx Anxshl - Current consumption [A]: 91 - Installed length [mm]: 12200 - Installed width [mm]: 9000 - Installed height [mm]: 3500 - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2012, condition: used, Multihead Weigher – Ishida Co., Ltd. DACS 030-SB/WP-I-N Manufacturer: Ishida Co., Ltd. Model: DACS 030-SB/WP-I-N Year of manufacture: 2012 Machine type: Multihead checkweigher / weighing system Description The Ishida DACS 030-SB/WP-I-N is a high-precision automatic checkweigher designed for dynamic inline weighing in food production and packaging lines. The machine ensures that products meet preset weight specifications while maintaining high throughput and accuracy. Ishida weighing systems are widely used in the food industry due to their reliability, hygienic design, and precise weighing technology. Technical Specifications - Manufacturer: Ishida Co., Ltd. - Model: DACS 030-SB/WP-I-N - Year: 2012 - Machine type: Automatic checkweigher - Application: Inline weight control - Operation: Fully automatic - Construction: Stainless steel hygienic design - Control: Digital / touchscreen interface Key Features - High-precision dynamic weighing system - Reliable operation for continuous production lines - Hygienic stainless steel design suitable for food processing - Easy integration into packaging lines - Automatic rejection of products outside tolerance (depending on configuration) Applications - Food packaging lines - Meat, poultry, and fish processing - Snack and convenience food packaging - Quality control in automated production lines Condition Ljdpfx Ansyt Rbqjxehl Used

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Lhodsztn Sxjpfx Anxsl Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.