Used Huba Control Pressure Sensor for sale (50,206)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Gedpfx Ajflpmqjgpjub The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Guodpfx Agofzrapepeb The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Guedpfx Agjfz A D Nopsb The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: not inspected (used), Used Linear Oven Electric power supply Belt width: 600mm Guodpstr Du Sjfx Agpob Manufacturer: Heat and Control Model: 25.21 Height: 2350 mm Width: 1600 mm Length: 9500 mm Electric power supply: 400V 50Hz 3N Total power: 150 kW

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Guedpfeyhc Raex Agpjb Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, mixing tank, control system. 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.'

Condition: used, YOM 2013 Chuck Size – 150mm Bar Capacity – 53mm Swing – 430mm Spindle Speed - 4,000 RPM Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) Guedpoy Dtuiofx Agpsb 2800kgs

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Godpfxoyzf Nae Agpoub Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, mileage: 311,434 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. Gedpfxjy R U Hgs Agpoub JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: used, functionality: fully functional, mileage: 315,067 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Gjdpfx Agjy R U Haepeub Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: used, Colour: Grey Guodpjwh Nuyofx Agpeb - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: good (used), Year of construction: 2014, functionality: fully functional, Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control system: Siemens Sinumerik 840 Year of manufacture: 2014 Internal machine no.: 57 Turning length: 1,000 mm Turning diameter over bed / cross slide: 420 / 235 mm Cross slide travel: 250 mm Max. speed: 10 – 3,000 rpm Guodey R Rl Espfx Agpjb Accessories - Steady rest - Extraction unit - 3-jaw chuck Schunk 250-62 - Tool holder

Condition: good (used), Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators -Pressure accumulator: with shut-off valve -Type: SA1 OM25 T100 Guodpfxed Rh Rbs Agpsb -Dimensions: 740/113/H200 mm -Weight: 15 kg

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Godpoy Nz Diofx Agpeub Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Pressure reducer, pressure regulator, bladder accumulator, high-pressure bladder accumulator, hydraulic accumulator, diaphragm accumulator -Manufacturer: Bosch, membrane accumulator from injection molding machine Krauss HS 50 -Type: Gsdpfeg Azpwsx Agpoub Container contents: 10 liters -Operating pressure: max. 211 bar -Dimensions: Ø 220 x 690 mm -Weight: 30 kg

Condition: ready for operation (used), ABM Greiffenberger ZBF12NHR-S0 / G80F / 4D808-4 geared motor, serial number: 191378798 / brake TS 10.00 Nm 230V~ 0.26A, used, good condition, fully functional, delivery as per photos. Gedpfxoy Sdrho Agpeub

Condition: new, Siemens 1FT5074-0AF01-0 - Z servo motor SN:YFU4311120601001 with 1FU1050-6MF 13.3 mVmin - Z = K18 (radial shaft seal, oil-tight, IP65 / K42 (smooth shaft) / K31 (second nameplate) K83 (terminal box rotated by +90 degrees), unused with storage marks, 100% fully functional, delivery as per photos. Gjdpfsy Sdr Iex Agpeub

Condition: ready for operation (used), Siemens 1FT5102-0AC71-2 - Z motor SN: E1W68186402001 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% functional, scope of delivery as per photos. Gusdpfx Asy Sdtlsgpeb

Condition: new, WEISS 5.5AZK 71L-4T B14P105 motor, serial number: 303194, unused, 100% functional, scope of delivery as per photos. Guedpfxey Sdu Ae Agpeb

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 AC VSA motor SN:EC510205346009 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% operational, scope of delivery as shown in photos. Gedpfx Aey Sdr Uegpsub

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z Motor SN: E0Z10008531005 without encoder - with 1FU1050-6HC 20.0 mV/min and EBD 0.8M 24V - 18W holding brake - Z = G45, used, in good condition, 100% functional, delivery as per photos. Guedpfx Ajy Sdrzsgpob

Condition: ready for operation (used), Siemens 1HU3058-0AC01 - Z Permanent Magnet Motor SN: 8C87787701001 without encoder, used, in good condition, fully functional, scope of delivery as per photos. Guedpfx Agsy Sduijpeb

Condition: ready for operation (used), Siemens D - Motor 22kW / 2800rpm - 400V / 690V B5, used, in good condition, 100% functional, scope of delivery as per photos NOTE: Please enquire separately for packaging and shipping costs! Gsdpfx Agoy Sduvopoub

Condition: ready for operation (used), Siemens 1FT5074-0AF71-2 - Z servomotor SN: E9L82106001004 with 1FU1050-6GF 13.3 mVmin and EBD 2 M 24V - 23W holding brake - Z = G45 (holding brake integrated), used, in good condition, 100% fully functional, delivery as shown in the photos. Gjdpsy Sdtfofx Agpoub

Condition: ready for operation (used), Siemens 1FT6082-1AF71-1AH1 synchronous servomotor SN:YFK451331001001, professionally fully overhauled and tested, 100% functional, delivery as per photos. Gusdjy Sdtropfx Agpob

Condition: ready for operation (used), Siemens 1FT6082-1AF71-2AG1 motor SN: EJ960113803001 with optical encoder 2048 PPR, used, in good condition, fully functional, scope of delivery as per photos. Guedpfxoy Sdtxo Agpob